Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
A little help with Tony Hawks 3
#1
I hope this is the right place to post.

I'm having no joy getting Tony Hawks 3 to work no matter what i try. It just goes to a black screen after the PS logo.

for GS im using gsdx32-avx

PCSX" version: 1.4.0

My specs are

760 OC
i5 2500
Win 7 64bit
8 gb ram

Any suggestions would be greatly appreciated. Thanks
Reply

Sponsored links

#2
Can you post your emulog?
[Image: 36a66c559937a1f5d0cd7460362d4093.jpg?bg=2c2c2c]
Reply
#3
If you have the MTVU speedhack turned on, switch it off and try again.
Reply
#4
I have turned of the speed hack already. How do i post a log?
Reply
#5
Is the emlog? It's very long (taken from the console).

Image type = CD
* CDVD Disk Open: CD, 1 tracks (1 to 1):
* * Track 1: Data (Mode 1) (300186 sectors)
Opening USB
Opening FW
Opening DEV9
McdSlot 0 [File]: C:\Users\Blank 64\Documents\PCSX2\memcards\Mcd001.ps2
McdSlot 1 [File]: C:\Users\Blank 64\Documents\PCSX2\memcards\Mcd002.ps2
McdSlot 2 [File]: [is not memcard file]
McdSlot 3 [File]: [is not memcard file]
McdSlot 4 [File]: [is not memcard file]
Plugins opened successfully.
EE/iR5900-32 Recompiler Reset
Bios Found: USA v01.60(07/02/2002) Console
BIOS rom1 module not found, skipping...
BIOS rom2 module not found, skipping...
BIOS erom module not found, skipping...
(UpdateVSyncRate) Mode Changed to NTSC.
(UpdateVSyncRate) FPS Limit Changed : 59.94 fps
# Initialize memory (rev:3.63, ctm:392Mhz, cpuclk:294Mhz detected)

PlayStation 2 ======== Hard reset boot
ROMGEN=2002-0207, IOP info (CPUID=1f, CACH_CONFIG=0, 2MB, IOP mode)
<20020207-164243,ROMconf,PS20160AC20020207.bin:11552>
# Total accessable memory size: 32 MB (B:2:8:0) (363:2:7c30)
# TLB spad=0 kernel=1:12 default=13:30 extended=31:38
# Initialize Start.
# Initialize GS ...
# Initialize INTC ...
# Initialize TIMER ...
# Initialize DMAC ...
# Initialize VU1 ...
# Initialize VIF1 ...
# Initialize GIF ...
# Initialize VU0 ...
# Initialize VIF0 ...
# Initialize IPU ...
# Initialize FPU ...
# Initialize User Memory ...
# Initialize Scratch Pad ...
# Initialize Done.

EE DECI2 Manager version 0.06 Feb 7 2002 16:41:20
CPUID=2e20, BoardID=0, ROMGEN=2002-0207, 32M



IOP Realtime Kernel Ver.0.9.1

Copyright 1999 © Sony Computer Entertainment Inc.

Reboot service module.(99/11/10)
cdvd driver module version 0.1.1 ©SCEI
Load File service.(99/11/05)
Multi Threaded Fileio module.(99/11/15)
iop heap service (99/11/03)
loadelf: fname rom0OhmySDSYS secname all
loadelf version 3.30
Input ELF format filename = rom0OhmySDSYS
0 00100000 0004c718 .....
Loaded, rom0OhmySDSYS
start address 0x100008
gp address 00000000
# Restart Without Memory Clear.
# Initialize GS ...
# Initialize INTC ...
# Initialize TIMER ...
# Initialize DMAC ...
# Initialize VU1 ...
# Initialize VIF1 ...
# Initialize GIF ...
# Initialize VU0 ...
# Initialize VIF0 ...
# Initialize IPU ...
# Initialize FPU ...
# Initialize Scratch Pad ...
# Restart Without Memory Clear Done.
# Restart Without Memory Clear.
# Initialize GS ...
# Initialize INTC ...
# Initialize TIMER ...
# Initialize DMAC ...
# Initialize VU1 ...
# Initialize VIF1 ...
# Initialize GIF ...
# Initialize VU0 ...
# Initialize VIF0 ...
# Initialize IPU ...
# Initialize FPU ...
# Initialize Scratch Pad ...
# Restart Without Memory Clear Done.
Get Reboot Request From EE
ROM directory not found

PlayStation 2 ======== Update rebooting..
ROM directory not found

PlayStation 2 ======== Update reboot complete
cdvdman Init
rmreset start
rmreset end
clearspu: completed
Pad Driver for OSD (2000/12/05 18:05) 392, 128


IOP Realtime Kernel Ver.0.9.1

Copyright 1999 © Sony Computer Entertainment Inc.

Reboot service module.(99/11/10)
cdvd driver module version 0.1.1 ©SCEI
Load File service.(99/11/05)
Multi Threaded Fileio module.(99/11/15)
iop heap service (99/11/03)
read/write allocate memory 4000
open name rom0:ROMVER flag 1 data 48a78
open fd = 2
loadmodule: fname rom0:ATAD args 0 arg
ATA: DEV9C version 0x0: unknown device detected
loadmodule: id 31, ret 1
loadmodule: fname rom0:HDDLOAD args 28 arg -osd
loadmodule: id -200, ret 1
open name rom0:FONTM flag 1 data 48a78
open fd = 2
open name rom0:FNTIMAGE flag 1 data 48a78
open fd = 2
open name rom0WackoNDIMAGE flag 1 data 48a78
open fd = 2
open name rom0:TEXIMAGE flag 1 data 48a78
open fd = 2
open name rom0:ICOIMAGE flag 1 data 48a78
open fd = 2
open name rom0:TZLIST flag 1 data 48a78
open fd = 2
_spu_rev_offsetaddr 1f9021
### addr = 1034255 size = 28640
_spu_rev_offsetaddr 1d9021
### addr = 968719 size = 28640
open name rom0:ROMVER flag 1 data 48a78
open fd = 2
open name rom1LaughVDID flag 1 data 48a78
open fd = -6
open name cdrom0:¥SYSTEM.CNF;1 flag 2 data 48a78
open fd = 2
# Restart.
# Initialize GS ...
# Initialize INTC ...
# Initialize TIMER ...
# Initialize DMAC ...
# Initialize VU1 ...
# Initialize VIF1 ...
# Initialize GIF ...
# Initialize VU0 ...
# Initialize VIF0 ...
# Initialize IPU ...
# Initialize FPU ...
# Initialize User Memory ...
# Initialize Scratch Pad ...
# Restart Done.
Get Reboot Request From EE
ROM directory not found

PlayStation 2 ======== Update rebooting..

PlayStation 2 ======== Update reboot complete
cdvdman Init


IOP Realtime Kernel Ver.0.9.1

Copyright 1999 © Sony Computer Entertainment Inc.

Reboot service module.(99/11/10)
cdvd driver module version 0.1.1 ©SCEI
Load File service.(99/11/05)
Multi Threaded Fileio module.(99/11/15)
iop heap service (99/11/03)
loadelf: fname rom0TongueS1DRV secname all
loadelf version 3.30
Input ELF format filename = rom0TongueS1DRV
0 00200000 0001bc58 ..
Loaded, rom0TongueS1DRV
start address 0x200008
gp address 00000000
loadelf: fname rom0TongueS1DRV secname all
loadelf version 3.30
Input ELF format filename = rom0TongueS1DRV
0 00200000 0001bc58 ..
Loaded, rom0TongueS1DRV
start address 0x200008
gp address 00000000
# Restart Without Memory Clear.
# Initialize GS ...
# Initialize INTC ...
# Initialize TIMER ...
# Initialize DMAC ...
# Initialize VU1 ...
# Initialize VIF1 ...
# Initialize GIF ...
# Initialize VU0 ...
# Initialize VIF0 ...
# Initialize IPU ...
# Initialize FPU ...
# Initialize Scratch Pad ...
# Restart Without Memory Clear Done.
PlayStation Driver Version 1.1.0
[ Make at 17:54:40 Jul 24 2000 ]
read/write allocate memory 4000
open name cdrom0:¥SYSTEM.CNF;1 flag 2 data 44a78
open fd = 2
loadmodule: fname rom0WackoIO2MAN args 0 arg
loadmodule: id 25, ret 0
loadmodule: fname rom0WackoECRMAN args 0 arg
loadmodule: id 26, ret 1
loadmodule: fname rom0:MCMAN args 0 arg
loadmodule: id 27, ret 0
open name mc0:/BADATA-SYSTEM/TITLE.DB flag 1 data 44a78
open fd = -2
open name mc1:/BADATA-SYSTEM/TITLE.DB flag 1 data 44a78
open fd = -2
eeprom_data[0]:0x00
SLUS_014.19(poly:0, sprt:0, mecha:0, null:0, hl:4, vblank:580, pgpu:4, speial:0, linear:0)
*PCSX2*: go PS1 mode DISC SPEED = 2X
(UpdateVSyncRate) Mode Changed to NTSC Progressive Scan.
psxUNK: 48c8e800
psxUNK: 48c8f000
psxUNK: 48c8d000
psxUNK: 48c8d800
psxUNK: 48c8e000
psxUNK: 48c0c000
psxUNK: 48c0c800
psxUNK: 48c4c000
psxUNK: 48c5c800
psxUNK: 48c4d000
psxUNK: 48c46800
psxUNK: 48c57000
psxUNK: 48c67800
psxUNK: 48c4a800
psxUNK: 48c5b000
psxUNK: 48c6b800
psxUNK: 48c4d800
psxUNK: 48c4e000
psxUNK: 48c88000
psxUNK: 48c98800
psxUNK: 48ca9000
psxUNK: 48cb9800
psxUNK: 48cca000
psxUNK: 48c84000
psxUNK: 48c94800
psxUNK: 48ca5000
psxUNK: 48cb5800
psxUNK: 48cc6000
psxUNK: 48c80000
psxUNK: 48c90800
psxUNK: 48ca1000
psxUNK: 48cb1800
psxUNK: 48cc2000
psxUNK: 48c82800
psxUNK: 48c93000
psxUNK: 48ca3800
psxUNK: c8800000
psxUNK: c8810004
psxUNK: c8a20000
psxUNK: c8a30004
psxUNK: c8c40000
psxUNK: c8c50004
psxUNK: 4a280030
psxUNK: 4849f800
psxUNK: 4b400006
psxUNK: 4802c000
psxUNK: c8800000
psxUNK: c8810004
psxUNK: c8a60000
psxUNK: 48864000
psxUNK: 4ae80413
psxUNK: e8f60000
psxUNK: e8ec0000
psxUNK: e90d0000
psxUNK: e92e0000
psxUNK: e9480000
psxUNK: 4b58002d
psxUNK: 48083800
psxUNK: 48c8e800
psxUNK: 48c8f000
psxUNK: 48c8d000
psxUNK: 48c8d800
psxUNK: 48c8e000
psxUNK: 48c0c000
psxUNK: 48c0c800
Closing plugins...
Closing DEV9
Closing FW
Closing USB
Closing CDVD
Closing SPU2
Closing PAD
Closing GS
Plugins closed successfully
Reply
#6
That's a Playstation 1 game.
[Image: ref_sig_anim.gif]
Like our Facebook Page and visit our Facebook Group!
Reply
#7
ahh, that maybe the problem i miss labeled. I've got it working now. But the pad (ps2 through adapter) doesn't seem to work (it's fine for others), and it also seems to be running really slow by the sound of the music.

At this point is there a convertor so i can plug a PS2 into a HDMI monitor (will it scale). I just want to play some PS2 games while my wife watches the telly. It seems compared to PS1 emulators it isn't really there yet for PS2
Reply
#8
Have you configured the controls for your PS2 pad? Because it should work just fine. And your CPU should be able to run the game just fine too.
Reply
#9
(08-21-2016, 10:50 AM)FlatOut Wrote: Have you configured the controls for your PS2 pad? Because it should work just fine. And your CPU should be able to run the game just fine too.

The controller seems fine with other titles, it's rather baffling. A shame as this is the one i'd most like to get working.
Reply
#10
I tried configuring the controller in a different port and that seems to have worked.

But the game has some really odd speed issues it's half the speed in menues yet in game and videos seem to play at double speed? Any work around for this?

Thanks for the help
Reply




Users browsing this thread: 1 Guest(s)