Originally posted schattenberg88 on NGemu,whom we thank.
Credits: "BCM124" 1st revision, GiGaHeRz for letting me use the ISO file, "cyclonmaster" (for helping others), "Gilgamesh" (for helping others), and “Schattenberg88” creation of this guide (6th Revision)
Converting saves from a PS3 to PCSX2 is possible, please read this link: http://forums.pcsx2.net/thread-7439-post...l#pid54495
Converting saves from your PS2 to PCSX2:
NOTES:
A)You must have a PCSX2 PS2 formatted memcard. You can do this from the Browser screen in the BIOS, or you can download the formattedmemcards.7z from this post and extract it in your memcards folder.
B)Boot.ELF and PS2 Save Builder are located in the memcardsave.RAR file
C)Most corrupt files are either due to the site hosting a bad file, closing the emulator before it could finish copying the save(s) over, or a bug in the emulator.
D)Free Program to create ISO's: Imgburn.
E)You will need 7-zip to open the .7z files in this post
Creating Game Saves For PCSX2 6th Revision
Credits: "BCM124" 1st revision, GiGaHeRz for letting me use the ISO file, "cyclonmaster" (for helping others), "Gilgamesh" (for helping others), and “Schattenberg88” creation of this guide (6th Revision)
Converting saves from a PS3 to PCSX2 is possible, please read this link: http://forums.pcsx2.net/thread-7439-post...l#pid54495
Converting saves from your PS2 to PCSX2:
NOTES:
A)You must have a PCSX2 PS2 formatted memcard. You can do this from the Browser screen in the BIOS, or you can download the formattedmemcards.7z from this post and extract it in your memcards folder.
B)Boot.ELF and PS2 Save Builder are located in the memcardsave.RAR file
C)Most corrupt files are either due to the site hosting a bad file, closing the emulator before it could finish copying the save(s) over, or a bug in the emulator.
D)Free Program to create ISO's: Imgburn.
E)You will need 7-zip to open the .7z files in this post
- Please read all above information before starting.
- Format your Memory Card in PCSX2. If you need help, follow CKemu's BIOS Guide, or download the formatted blank memory cards (formattedmemcards.7z) from the attached files below.
- Find the game you want from GameFAQs, CodeBreaker, Gameshark, and download the save file. In this tutorial I am using a Kingdom Hearts Save.
- Open PS2 Save Builder.
- Click Open, and then locate your save file that you just downloaded.
- Remember the “root/ID” Number.
- Now Create a folder containing that number.
- Back in the PS2 Save Builder, Highlight all the “File Names,” right click and tell it “Extract”.
- Find the folder you just created, and tell it save. You should now have the save files in the folder.
- If you want to do more saves, then now is the time. Repeat above steps.
- Now close PS2 Save builder.
- Open any CD Burner Program, Put the folder on the CD and create an ISO containing that folder. You can do this by opening Imgburn, clicking 'Create image file from files/folders, dragging and dropping your folder and finally clicking 'Build'
(Note: YOU DO NOT HAVE TO BURN A DISC, also you can add more than one folder to the ISO. I recommend "ImgBurn").
- Now Put the ISO in the same folder as Boot.elf. (Just makes life easier)
- Now Open PCSX2 .
- Set the Graphics plugin to GSdx or any other plugin you wish to use.
- Set the Sound to any plug-in.
- Go to CDVD->ISO selector and browse to the ISO you created. (SAVE.ISO is what we are using here)
- Click Open
- Now go to Misc->Show Console in case it is disabled (This is what you look at to make sure the save transfers correctly.)
- Go to System->Run ELF...
- Locate Boot.elf and open it
- If you get an Error Message. Just click “OK” and continue.
- Press any key assigned to the controller. I prefer pressing “Select,”
- Under “DEFAULT” tell it Edit
- Scroll down to “MISC” and tell it “OK”
- Select File Browser, and tell it “OK”
- Select “OK” again at the bottom of the screen
- Press Down, Select “Default: FileBrowser,” and Press “OK”
- Go to “CDFS” and tell it “OK”
- Locate the file you created titled ex: “BASLUS-20370-02” (Could be different)
- Select it, but don’t click “OK”
- If you have more save files, Press “X” to “Mark” the file and keep doing that. Once done press “R1,” Select “Copy,” and tell it “OK.”
- Go up one level, by pressing “Triangle”
- Select “mc0:/” or “mc1:/”and tell it “OK”
- Press “R1” and tell it “Paste.”
- This should take a while. So please wait a couple minutes. Once you’re done, you have a memory card with save files!