08-09-2010, 07:36 AM
Hey guys!
I tried to load my final fantasy x on my pcsx0.9.7 but all i got was a blank screen and this log:
Opening plugins...
Opening GS
Opening PAD
Opening SPU2
Opening CDVD
detected blocksize = 2048
isoOpen(DVD): C:\Users\SeanWhoIsCool\Desktop\FINAL_FANTASY_X.ISO ok.
The iso has 2201280 blocks (size 2048).
The isos offset is 0, and the block offset is 24.
* CDVD Disk Open: DVD, Single layer or unknown:
* * Track 1: Data (Mode 1) (2201280 sectors)
(IsoFS) Block 0x10: Primary partition info.
Opening USB
Opening FW
Opening DEV9
McdSlot 0: C:\Users\SeanWhoIsCool\Documents\pcsx2\memcards\Mcd001.ps2
McdSlot 1: C:\Users\SeanWhoIsCool\Documents\pcsx2\memcards\Mcd002.ps2
Plugins opened successfully.
Issuing EE/iR5900-32 Recompiler Reset
Bios Version 1.60
Load Bios Warning: rom1 module not found, skipping... (this is not an error)
Load Bios Warning: rom2 module not found, skipping... (this is not an error)
Load Bios Warning: erom module not found, skipping... (this is not an error)
(UpdateVSyncRate) Mode Changed to NTSC.
(UpdateVSyncRate) FPS Limit Changed : 59.94 fps
# Initialize memory (rev:3.63, ctm:393Mhz, cpuclk:295Mhz detected)
# Total accessable memory size: 32 MB (B:2:8:0) (363:2:7c30)
Closing DEV9
Closing FW
Closing USB
Closing CDVD
Closing SPU2
Closing PAD
Closing GS
Help please
I tried to load my final fantasy x on my pcsx0.9.7 but all i got was a blank screen and this log:
Opening plugins...
Opening GS
Opening PAD
Opening SPU2
Opening CDVD
detected blocksize = 2048
isoOpen(DVD): C:\Users\SeanWhoIsCool\Desktop\FINAL_FANTASY_X.ISO ok.
The iso has 2201280 blocks (size 2048).
The isos offset is 0, and the block offset is 24.
* CDVD Disk Open: DVD, Single layer or unknown:
* * Track 1: Data (Mode 1) (2201280 sectors)
(IsoFS) Block 0x10: Primary partition info.
Opening USB
Opening FW
Opening DEV9
McdSlot 0: C:\Users\SeanWhoIsCool\Documents\pcsx2\memcards\Mcd001.ps2
McdSlot 1: C:\Users\SeanWhoIsCool\Documents\pcsx2\memcards\Mcd002.ps2
Plugins opened successfully.
Issuing EE/iR5900-32 Recompiler Reset
Bios Version 1.60
Load Bios Warning: rom1 module not found, skipping... (this is not an error)
Load Bios Warning: rom2 module not found, skipping... (this is not an error)
Load Bios Warning: erom module not found, skipping... (this is not an error)
(UpdateVSyncRate) Mode Changed to NTSC.
(UpdateVSyncRate) FPS Limit Changed : 59.94 fps
# Initialize memory (rev:3.63, ctm:393Mhz, cpuclk:295Mhz detected)
# Total accessable memory size: 32 MB (B:2:8:0) (363:2:7c30)
Closing DEV9
Closing FW
Closing USB
Closing CDVD
Closing SPU2
Closing PAD
Closing GS
Help please