Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Low-end PCSX2 v1.0.0 - v1.3.0 settings
#1
Read this about 1.3.1 Git builds

1.5.0+ gsdx settings added, replaced old version for new structure change




just to note: settings work up to current SVN (1.3.0)

UPDATE:

I will make this clear for EVERYONE. These settings are based on an E2200 2.2Ghz. I now own a 3.3Ghz i3 This is the last time I am using the E2200, but this is the best I can do right now. AFTER 1.0.0 if someone needs help they can ask me in PM, I have much experience with PCSX2, and I will try to assist. THIS THREAD is for 1.0.0

stop pming me about 1.0.0 that is what this is for


(sorry refraction, bositman and other admins/mods. I needed to make this visible and clearly unmissable)

ok, so it's about time I got to doing this..

As I have a new PC that is MUCH faster now, this is the last set I'm going to be doing, I hope these have benefited those who use it and someone continues this for everyone else (anyone still needing assistance can of course ask, I will still help as best I can)

Configuration settings for
PCSX2 1.0.0.r5350 - compiled on Aug 1 2012

ALL INIs found in C:\Users\-YOURNAME-\Documents\PCSX2
note: if you see "configuration settings" that is the same as ".ini"

THESE SETTING ARE NOT SUPPORTED BY THE PCSX2 DEV TEAM
PCSX2_ui.ini
Quote:MainGuiPosition=394,181
SysSettingsTabName=Speedhacks
McdSettingsTabName=none
ComponentsTabName=BIOS
AppSettingsTabName=Appearance
GameDatabaseTabName=none
LanguageId=0
LanguageCode=default
RecentIsoCount=12
DeskTheme=default
Listbook_ImageSize=32
Toolbar_ImageSize=24
Toolbar_ShowLabels=enabled
CurrentIso=
CurrentELF=
EnableSpeedHacks=enabled
EnableGameFixes=enabled
EnablePresets=disabled
PresetIndex=0
McdCompressNTFS=enabled
CdvdSource=Plugin
[MemoryCards]
Slot1_Enable=enabled
Slot1_Filename=Mcd001.ps2
Slot2_Enable=enabled
Slot2_Filename=Mcd002.ps2
Multitap1_Slot2_Enable=disabled
Multitap1_Slot2_Filename=Mcd-Multitap1-Slot02.ps2
Multitap1_Slot3_Enable=disabled
Multitap1_Slot3_Filename=Mcd-Multitap1-Slot03.ps2
Multitap1_Slot4_Enable=disabled
Multitap1_Slot4_Filename=Mcd-Multitap1-Slot04.ps2
Multitap2_Slot2_Enable=disabled
Multitap2_Slot2_Filename=Mcd-Multitap2-Slot02.ps2
Multitap2_Slot3_Enable=disabled
Multitap2_Slot3_Filename=Mcd-Multitap2-Slot03.ps2
Multitap2_Slot4_Enable=disabled
Multitap2_Slot4_Filename=Mcd-Multitap2-Slot04.ps2
[ProgramLog]
Visible=enabled
AutoDock=enabled
DisplayPosition=779,181
DisplaySize=680,560
FontSize=8
Theme=Dark
[Folders]
UseDefaultBios=disabled
UseDefaultSnapshots=enabled
UseDefaultSavestates=enabled
UseDefaultMemoryCards=enabled
UseDefaultLogs=enabled
UseDefaultLangs=enabled
UseDefaultPluginsFolder=enabled
Bios=(erased)
Snapshots=C:\\Users\\Pstrac\\Documents\\PCSX2\\snaps
Savestates=C:\\Users\\Pstrac\\Documents\\PCSX2\\sstates
MemoryCards=C:\\Users\\Pstrac\\Documents\\PCSX2\\memcards
Logs=C:\\Users\\Pstrac\\Documents\\PCSX2\\logs
Langs=C:\\Program Files\\PCSX2 1.0.0\\Langs
PluginsFolder=C:\\Program Files\\PCSX2 1.0.0\\Plugins
RunIso=C:\\Users\\Pstrac\\Documents\\PCSX2
RunELF=C:\\Users\\Pstrac\\Documents\\PCSX2
[Filenames]
GS=C:\\Program Files\\PCSX2 1.0.0\\Plugins\\gsdx32-ssse3-r5350.dll
PAD=C:\\Program Files\\PCSX2 1.0.0\\Plugins\\lilypad-r5350.dll
SPU2=C:\\Program Files\\PCSX2 1.0.0\\Plugins\\spu2-x-r5350.dll
CDVD=C:\\Program Files\\PCSX2 1.0.0\\Plugins\\cdvdiso-r5350.dll
USB=C:\\Program Files\\PCSX2 1.0.0\\Plugins\\USBnull.dll
FW=C:\\Program Files\\PCSX2 1.0.0\\Plugins\\FWnull.dll
DEV9=C:\\Program Files\\PCSX2 1.0.0\\Plugins\\DEV9null.dll
BIOS= (erased)
[GSWindow]
CloseOnEsc=enabled
DefaultToFullscreen=disabled
AlwaysHideMouse=disabled
DisableResizeBorders=disabled
DisableScreenSaver=enabled
WindowSize=640,480
WindowPos=260,450
IsMaximized=disabled
IsFullscreen=disabled
IsToggleFullscreenOnDoubleClick=enabled
AspectRatio=Stretch
Zoom=100.0
[Framerate]
NominalScalar=1.0
TurboScalar=2.0
SlomoScalar=0.50
SkipOnLimit=disabled
SkipOnTurbo=disabled
[ConsoleLogSources]
Devel=disabled
.EEout=disabled
.IOPout=disabled
.EErecPerf=disabled
.ELF=disabled
.SysEvents=disabled
.pxThread=disabled
[TraceLogSources]
.SIF=disabled
EE.Bios=disabled
EE.Memory=disabled
EE.Disasm.R5900=disabled
EE.Disasm.COP0=disabled
EE.Disasm.FPU=disabled
EE.Disasm.VUmacro=disabled
EE.Disasm.Cache=disabled
EE.Registers.HwRegs=disabled
EE.Registers.UnknownRegs=disabled
EE.Registers.DmaRegs=disabled
EE.Registers.IPU=disabled
EE.GIFtags=disabled
EE.VIFcodes=disabled
EE.MSKPATH3=disabled
EE.Events.DmaCtrl=disabled
EE.Events.Counters=disabled
EE.Events.MFIFO=disabled
EE.Events.VIF=disabled
EE.Events.GIF=disabled
IOP.Bios=disabled
IOP.Memorycards=disabled
IOP.Pad=disabled
IOP.Disasm.R3000A=disabled
IOP.Disasm.Memory=disabled
IOP.Registers.HwRegs=disabled
IOP.Registers.UnknownRegs=disabled
IOP.Registers.DmaRegs=disabled
IOP.Events.DmaCrl=disabled
IOP.Events.Counters=disabled
IOP.Events.CDVD=disabled
[TraceLogSources/IOP.Disasm.COP2]
GPU=disabled
[DialogPositions]
AboutBox_Size=520,623
AboutBox_Pos=755,149

pcsx2_vm.ini
Quote:[EmuCore]
CdvdVerboseReads=disabled
CdvdDumpBlocks=disabled
EnablePatches=enabled
EnableCheats=disabled
ConsoleToStdio=disabled
HostFs=disabled
BackupSavestate=enabled
McdEnableEjection=enabled
MultitapPort0_Enabled=disabled
MultitapPort1_Enabled=disabled
[EmuCore/Speedhacks]
EECycleRate=1
VUCycleSteal=0
fastCDVD=enabled
IntcStat=enabled
WaitLoop=enabled
vuFlagHack=enabled
vuThread=enabled
[EmuCore/CPU]
FPU.DenormalsAreZero=enabled
FPU.FlushToZero=enabled
FPU.Roundmode=3
VU.DenormalsAreZero=enabled
VU.FlushToZero=enabled
VU.Roundmode=3
[EmuCore/CPU/Recompiler]
EnableEE=enabled
EnableIOP=enabled
EnableEECache=disabled
EnableVU0=enabled
EnableVU1=enabled
UseMicroVU0=enabled
UseMicroVU1=enabled
vuOverflow=disabled
vuExtraOverflow=disabled
vuSignOverflow=disabled
vuUnderflow=disabled
fpuOverflow=disabled
fpuExtraOverflow=disabled
fpuFullMode=disabled
StackFrameChecks=disabled
PreBlockCheckEE=disabled
PreBlockCheckIOP=disabled
[EmuCore/GS]
SynchronousMTGS=disabled
DisableOutput=disabled
VsyncQueueSize=2
FrameLimitEnable=enabled
FrameSkipEnable=disabled
VsyncEnable=disabled
ManagedVsync=disabled
LimitScalar=1.0
FramerateNTSC=59.94
FrameratePAL=50.0
DefaultRegionMode=ntsc
FramesToDraw=2
FramesToSkip=2
[EmuCore/Gamefixes]
VuAddSubHack=disabled
VuClipFlagHack=disabled
FpuCompareHack=disabled
FpuMulHack=disabled
FpuNegDivHack=disabled
XgKickHack=disabled
IPUWaitHack=disabled
EETimingHack=disabled
SkipMPEGHack=disabled
OPHFlagHack=disabled
DMABusyHack=disabled
VIFFIFOHack=disabled
VIF1StallHack=disabled
GIFReverseHack=disabled
[EmuCore/Profiler]
Enabled=disabled
RecBlocks_EE=enabled
RecBlocks_IOP=enabled
RecBlocks_VU0=enabled
RecBlocks_VU1=enabled
[EmuCore/TraceLog]
Enabled=disabled
EE.bitset=0
IOP.bitset=0

gsdx.ini Note: This uses dx11
Quote:[Settings]
Adapter=1002:67DF:34151462:C7
Renderer=3
Interlace=7
upscale_multiplier=1
filter=2
accurate_blending_unit=3
crc_hack_level=2
MaxAnisotropy=0
paltex=1
logz=1
fba=1
aa1=0
mipmap=1
resx=384
resy=384
extrathreads=2
accurate_date=0
UserHacks=0
UserHacks_round_sprite_offset=0
UserHacks_SpriteHack=0
UserHacks_MSAA=0
UserHacks_AlphaHack=0
UserHacks_HalfPixelOffset=0
UserHacks_SkipDraw=0
UserHacks_WildHack=0
UserHacks_AlphaStencil=1
preload_frame_with_gs_data=0
Userhacks_align_sprite_X=0
UserHacks_safe_fbmask=0
UserHacks_DisableDepthSupport=1
UserHacks_DisablePartialInvalidation=0
UserHacks_TCOffset=0
to use native resolution set "upscale_multiplier" to 1

I am providing no DX9 settings, it's just a render change.
Also, if games are running slow still, change "nativeres" to 0

these are pretty much plug and play, just be sure you change the location to your own directory.
Reply

Sponsored links

#2
Hey, how do you do this when running on DirectX9? I am running Vista, but whenever I try to use Direct10 (i dont have 11 yet), it says that there are no drivers which is weird since I am using Vista.

Can you please send me a PM about this.
Reply
#3
did you update direct x?
Reply
#4
Hi Saiki,
I think I really need your help. While reading here in the forums, I stumbled upon your sig saying "Before 2.4 dual?", and that is apparently why I'm here.So, here goes.. My PC isn't really below 2.4 dual but it's 2.5 dual, which is really close. And what makes me think I need to follow this guide is bec. my GPU is integrated, so it's like a drawback. Now I would like to play Kingdom Hearts but I'm not sure if it will work at a reasonable speed. I don't know much about the configuration and my integrated GPU is making it harder for me to configure. PLEASE help me I really want to play it. It's okay if the graphics wouldn't be that good, I just want to play it at good speed. So here are my PC specs:

OS: Windows7 Ultimate (32-bit)
Processor: Pentium Dual-Core CPU E5200 @ 2.50GHz (2 CPUs), ~2.5Ghz
Memory: 2GB RAM
Display: NVIDIA GeForce 7100 / NVIDIA nForce 630i
Reso: 1600 x 900 (32 bit) (60 Hz)

So will it be good if use your INIs here? I believe you're an expert about these things. I'm really counting on you. Many thanks! Please reply.
Reply
#5
yes, it will be fine, but change the renderer in the GUI for gsdx.

also, won't be pretty, but I recommend using non-native as the 7100 can't handle native for some reason
Reply
#6
Yay!!! Thank you so much!!! So what will I change inthe renderer and how do I use non-native? Also, I'm not so sure if I can use DX11 bec. before I just ise D3D9 (or something like that) with 0.9.8. but when I enter Dxdiag ot says DX11. So I just replace it eith my PC Username and put it inside PCSX2 folder? Sorry for asking too much. THANKS!!!
Reply
#7
just uncheck "native" in the ui

or set nativeres to 0 instead of 1
Reply
#8
Okay thanks!!
Reply
#9
I just updated to the newest drivers and changed the .ini's to your low spec set up. The problem is still there though, text is still either not there or a garbled mess.


Attached Files Thumbnail(s)
   
Reply
#10
I would suggest 0.9.8 then
Reply




Users browsing this thread: 1 Guest(s)