MC3 lag
#1
Help? I get IMMENSE lag for PCSX2 while trying to run Midnight club 3 (DUB Edition REMIX), 
specs:
Intel R core i7 CPU 920 @ 2.67GH/z 2.00 GH/z
GTX 950 graphics card 12 GB/s

I'm pretty sure i am capable to run it, i just need the Correct config; i am also using PCSX 1.4.0.
Reply

Sponsored links

#2
MC3 can be really demanding and your CPU does have only an STR or1163 where it would require at least 1600.
Your GPU may be on the weak side if you push internal res too high

Enable all recommended speedhacks, don't push internal res higher than 2x, and set ee cycle rate to 1 for a start.
That should help a bit, but don't expect miracles
CPU : AMD Ryzen 7 3800X
Mobo : Asus PRIME B450-PLUS
GPU : NVIDIA GeForce RTX 3070
RAM : 16 Go
Reply
#3
(04-05-2017, 04:52 PM)jesalvein Wrote: MC3 can be really demanding and your CPU does have only an STR or1163 where it would require at least 1600.
Your GPU may be on the weak side if you push internal res too high

Enable all recommended speedhacks, don't push internal res higher than 2x, and set ee cycle rate to 1 for a start.
That should help a bit, but don't expect miracles

Alright, i'll try; thanks for the help, i will get back at ya if it works better or not.
Reply
#4
(04-05-2017, 04:52 PM)jesalvein Wrote: MC3 can be really demanding and your CPU does have only an STR or1163 where it would require at least 1600.
Your GPU may be on the weak side if you push internal res too high

Enable all recommended speedhacks, don't push internal res higher than 2x, and set ee cycle rate to 1 for a start.
That should help a bit, but don't expect miracles

Welp, still at 20-30 FPS max, thanks for trying; if you have any other ideas let me know.
Reply
#5
Much better specs than yours, but perhaps have a look here.

http://forums.pcsx2.net/Thread-Solved-We...tion-Remix
Lenovo Y50-70 Gaming Laptop
Intel Core i7-4720HQ @ 2.6Ghz - 3.6Ghz Quad Core
Nvidia GTX 960M 4GB
8GB DDR3 Ram
15.6'' Full HD 1920 x 1080 IPS
Windows 10 64 Bit
---
Intel Core i5 4670 @ 3.4Ghz
Gigabyte H81M
Gigabyte Radeon R9 280X 3GB
8GB DDR 3 Ram
1TB WD Black
Windows 10 64 Bit
Phillips 23.6" 1920x1080 IPS
Reply
#6
(04-05-2017, 05:10 PM)Donovan24 Wrote: Much better specs than yours, but perhaps have a look here.

http://forums.pcsx2.net/Thread-Solved-We...tion-Remix

I actually tried that before posting this, but no luck.  Sad
Reply
#7
What sort of speeds do you get? If you have a good CPU cooler, I recommend overclocking that chip to about 3.4Ghz, you should manage that no problems.
[Image: ref-sig-anim.gif]

Reply
#8
(04-05-2017, 05:27 PM)refraction Wrote: What sort of speeds do you get? If you have a good CPU cooler, I recommend overclocking that chip to about 3.4Ghz, you should manage that no problems.

I'm... Actually not sure; i probably sound so stupid; but how do i check that? not a PC expert over here... xD
Reply
#9
with the 920 it's quite easy, you just need to raise the BCLK in the BIOS up to about 120-130 (i'd try 120 first) and it should work without any other adjustments. 120 will get you 3.1Ghz, 130 will get you 3.4ish Smile Of course if you start crashing you may need to adjust the voltage.

But I must stress, don't do this unless you have an aftermarket cooler on your computer!
[Image: ref-sig-anim.gif]

Reply
#10
(04-05-2017, 08:07 PM)refraction Wrote: with the 920 it's quite easy, you just need to raise the BCLK in the BIOS up to about 120-130 (i'd try 120 first) and it should work without any other adjustments. 120 will get you 3.1Ghz, 130 will get you 3.4ish Smile Of course if you start crashing you may need to adjust the voltage.

But I must stress, don't do this unless you have an aftermarket cooler on your computer!

Ah, alright, i will try that; and i do have an aftermarket pretty large fan; thanks for the suggestion!
Reply




Users browsing this thread: 1 Guest(s)