Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Needing some help, over here
#1
Hello, everyone. I recently made a post about my problem on another thread, but was suggested to make my own thread about it, so here I am.

Yesterday, I decided to try PCSX2 out. Got the 0.9.8 (r4600) version, configured GSdx SSE41 with Direct3D11 (Hardware), didn't turn on any speedhacks and tried running one of my demo disks. I'm going to tell today's experiences, however, not yesterday's, since I'm not sure if yesterday I tried with any speedhack on and, as such, there could be different results.

I tried two demos, Metal Gear Solid 3 and Ratchet and Clank 3.
With R&C, I had an unsteady 35-50fps throughout the demo and the textures were all screwed up. The EE averaged 90% and the GS 45%.

With MGS, the framerate was around 20-25fps during most of the first cutscene. However, the bits inside the cockpit and when Snake jumped off fluctuated between 15 and 24fps. When he landed, the framerate jumped a little bit, dropped like mad during the radio call (4 fps) and when I assumed control of Snake, the framerate went back to 30-40 fps. The downside is, I can't see anything, since there are a whole lot of blue vertical lines obstructing the screen. EE ~60%, GS ~40%.

Taking that in account, I decided to try this out. Changed the EE/IOP, VUs and Speedhack settings according to what I was suggested and the same for the gsdx.ini.

With R&C, the framerate got much better, with a steady 50fps; however, there were some errors and the game froze when I tried to climb on a ledge. EE 50-70% and GS 20-34%.

With MGS, the cutscenes were mostly around 50 fps, except inside the cockpit and when Snake jumped off the plane; the framerate averaged 15 fps. When he landed, it had a small spike and fell back down with the radio call, to 15 fps. In the gameplay, it went up to 35 fps. Blue lines still there. EE around 50%, GS around 25-30%.


My machine is a Toshiba Satellite L755-1NM. Its specs are the following:
Processor Type: Processor Intel ® Core ™ i7 -2670QM
clock speed: 2.20 / 3.10 GHz Turbo
Front Side Bus: 1333 MHz
Level 3 cache: 6 MB "
"Graphic card type: NVIDIA ® GeForce ® GT 525m with CUDA ™ Technology
Memory: 2,048 MB dedicated VRAM. Available graphics memory can be expanded using the system memory via TurboCache ™ technology: up to 4095 MB with 8GB of system memory installed, (with operating system pre-installed 64-bit).
type: DDR3 Video RAM (resp. Video RAM and system memory combined)
Connector Bus: PCI Express ®


Chik'Tikka suggested that it might be Nvidia Optimus not recognizing PCSX2, but I'm not the most tech savvy person and, as such, I have absolutely no idea on how to fix that without screwing something up. May I remind you that I'm sort of new to this whole PS2 emulation deal (my only previous experience was trying to run Zone of the Enders 2 on my previous laptop from 2005. Let's just say it had a constant 2 fps and was, thus, completely unplayable).

Any help in raising the FPS and getting rid of those nasty lines would be greatly appreciated!
Reply

Sponsored links

#2
I was just playing MGS3 (granted this was not the demo. I should try to find it) on my PC, my FPS stayed near 35-40

now I cannot speak for Laptops specifically, but can you post your inis please?
Reply
#3
(04-15-2012, 06:21 PM)Saiki Wrote: I was just playing MGS3 (granted this was not the demo. I should try to find it) on my PC, my FPS stayed near 35-40

now I cannot speak for Laptops specifically, but can you post your inis please?

Do you want a simple list of them or their content as well?
If you just want a list, here it is:

Code:
C:/.../My Documents/PCSX2/inis
cdvdGigaherz.ini
Dev9null.ini
FWnull.ini
GSdx.ini
LilyPad.ini
PCSX2_ui.ini
PCSX2_vm.ini
SPU2-X.ini
USBnull.ini

I also add that I have two backups of these: one with the default settings and another with the edited settings after going through your guide.
Reply
#4
I want posted contents of:
pcsx2_vm.ini
gsdx.ini

also post emulog.txt please
Reply
#5
pcsx2_vm.ini

Default:
Code:
[EmuCore]
CdvdVerboseReads=disabled
CdvdDumpBlocks=disabled
EnablePatches=enabled
EnableCheats=disabled
ConsoleToStdio=disabled
HostFs=disabled
BackupSavestate=disabled
McdEnableEjection=enabled
MultitapPort0_Enabled=disabled
MultitapPort1_Enabled=disabled
[EmuCore/Speedhacks]
EECycleRate=1
VUCycleSteal=2
fastCDVD=disabled
IntcStat=enabled
WaitLoop=enabled
vuFlagHack=enabled
vuBlockHack=disabled
[EmuCore/CPU]
FPU.DenormalsAreZero=enabled
FPU.FlushToZero=enabled
FPU.Roundmode=3
VU.DenormalsAreZero=enabled
VU.FlushToZero=enabled
VU.Roundmode=3
[EmuCore/CPU/Recompiler]
EnableEE=enabled
EnableIOP=enabled
EnableEECache=disabled
EnableVU0=enabled
EnableVU1=enabled
UseMicroVU0=enabled
UseMicroVU1=enabled
vuOverflow=enabled
vuExtraOverflow=disabled
vuSignOverflow=disabled
vuUnderflow=disabled
fpuOverflow=enabled
fpuExtraOverflow=disabled
fpuFullMode=disabled
StackFrameChecks=disabled
PreBlockCheckEE=disabled
PreBlockCheckIOP=disabled
[EmuCore/GS]
SynchronousMTGS=disabled
DisableOutput=disabled
VsyncQueueSize=2
FrameLimitEnable=enabled
FrameSkipEnable=disabled
VsyncEnable=disabled
ManagedVsync=disabled
LimitScalar=1.0
FramerateNTSC=59.94
FrameratePAL=50.0
DefaultRegionMode=ntsc
FramesToDraw=2
FramesToSkip=2
[EmuCore/Gamefixes]
VuAddSubHack=disabled
VuClipFlagHack=disabled
FpuCompareHack=disabled
FpuMulHack=disabled
FpuNegDivHack=disabled
XgKickHack=disabled
IPUWaitHack=disabled
EETimingHack=disabled
SkipMPEGHack=disabled
OPHFlagHack=disabled
DMABusyHack=disabled
[EmuCore/Profiler]
Enabled=disabled
RecBlocks_EE=enabled
RecBlocks_IOP=enabled
RecBlocks_VU0=enabled
RecBlocks_VU1=enabled
[EmuCore/TraceLog]
Enabled=disabled
EE.bitset=0
IOP.bitset=0

Post guide:
Code:
[EmuCore]
CdvdVerboseReads=disabled
CdvdDumpBlocks=disabled
EnablePatches=enabled
EnableCheats=disabled
ConsoleToStdio=disabled
HostFs=disabled
BackupSavestate=disabled
McdEnableEjection=enabled
MultitapPort0_Enabled=disabled
MultitapPort1_Enabled=disabled
[EmuCore/Speedhacks]
EECycleRate=1
VUCycleSteal=1
fastCDVD=enabled
IntcStat=enabled
WaitLoop=enabled
vuFlagHack=enabled
vuBlockHack=disabled
[EmuCore/CPU]
FPU.DenormalsAreZero=enabled
FPU.FlushToZero=enabled
FPU.Roundmode=3
VU.DenormalsAreZero=enabled
VU.FlushToZero=enabled
VU.Roundmode=3
[EmuCore/CPU/Recompiler]
EnableEE=enabled
EnableIOP=enabled
EnableEECache=disabled
EnableVU0=enabled
EnableVU1=enabled
UseMicroVU0=enabled
UseMicroVU1=enabled
vuOverflow=disabled
vuExtraOverflow=disabled
vuSignOverflow=disabled
vuUnderflow=disabled
fpuOverflow=disabled
fpuExtraOverflow=disabled
fpuFullMode=disabled
StackFrameChecks=disabled
PreBlockCheckEE=disabled
PreBlockCheckIOP=disabled
[EmuCore/GS]
SynchronousMTGS=disabled
DisableOutput=disabled
VsyncQueueSize=2
FrameLimitEnable=enabled
FrameSkipEnable=disabled
VsyncEnable=disabled
ManagedVsync=disabled
LimitScalar=1.0
FramerateNTSC=59.94
FrameratePAL=50.0
DefaultRegionMode=ntsc
FramesToDraw=2
FramesToSkip=2
[EmuCore/Gamefixes]
VuAddSubHack=disabled
VuClipFlagHack=disabled
FpuCompareHack=disabled
FpuMulHack=disabled
FpuNegDivHack=disabled
XgKickHack=disabled
IPUWaitHack=disabled
EETimingHack=disabled
SkipMPEGHack=disabled
OPHFlagHack=disabled


GDsx.ini

Default:
Code:
[Settings]
ModeWidth=0
ModeHeight=0
ModeRefreshRate=0
Renderer=3
Interlace=3
AspectRatio=0
upscale_multiplier=2
windowed=0
filter=2
paltex=0
vsync=0
logz=1
fba=1
aa1=0
nativeres=0
resx=1024
resy=1024
swthreads=1
msaa=0
UserHacks_AlphaHack=0
UserHacks_HalfPixelOffset=0
UserHacks_SkipDraw=0

Post guide:
Code:
[Settings]
Renderer=3
Interlace=0
AspectRatio=0
upscale_multiplier=1
windowed=0
filter=1
paltex=1
vsync=0
logz=1
fba=1
aa1=0
nativeres=1
resx=384
resy=384
swthreads=2
msaa=0
allowhacks=0
UserHacks_AlphaHack=0
UserHacks_HalfPixelOffset=0
UserHacks_SkipDraw=0
CaptureWidth=800
CaptureHeight=600
CaptureFileName=
CaptureVideoCodecDisplayName=
ModeWidth=0
ModeHeight=0
ModeRefreshRate=0
blur=0


emulog.txt
Code:
PCSX2 0.9.8.r4600  - compiled on Apr 27 2011
Savestate version: 0x9a010000

Host Machine Init:
    Operating System =  Microsoft Windows 7 Home Premium Edition Service Pack 1 (build 7601), 64-bit
    Physical RAM     =  8173 MB
    CPU name         =  Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz
    Vendor/Model     =  GenuineIntel (stepping 07)
    CPU speed        =  2.194 ghz (8 logical threads)
    x86PType         =  Standard OEM
    x86Flags         =  bfebfbff 1fbae3bf
    x86EFlags        =  28100000

x86 Features Detected:
    MMX.. SSE.. SSE2.. SSE3.. SSSE3.. SSE4.1.. SSE4.2.. AVX

Reserving memory for recompilers...

Loading plugins...
    Binding GS    : C:\Program Files (x86)\PCSX2 0.9.8\Plugins\gsdx-sse4-r4600.dll
(GameDB) Database Not Found! [C:\Users\Diogo\pcsx2\PCSX2 0.9.8\GameIndex.dbf]
Windows 6.1.7601 (Service Pack 1 1.0)
NVIDIA GeForce GT 525M (8.17.12.6857)
    Binding PAD    : C:\Program Files (x86)\PCSX2 0.9.8\Plugins\PadSSSPSX.dll
    Binding SPU2    : C:\Program Files (x86)\PCSX2 0.9.8\Plugins\spu2-x-r4600.dll
    Binding CDVD    : C:\Program Files (x86)\PCSX2 0.9.8\Plugins\cdvdGigaherz.dll
    Binding USB    : C:\Program Files (x86)\PCSX2 0.9.8\Plugins\USBnull.dll
    Binding FW    : C:\Program Files (x86)\PCSX2 0.9.8\Plugins\FWnull.dll
    Binding DEV9    : C:\Program Files (x86)\PCSX2 0.9.8\Plugins\DEV9null.dll
Plugins loaded successfully.

Bios Found: Europe  v01.60(04/10/2001)  Console
Bios Found: Europe  v02.00(14/06/2004)  Console
Bios Found: USA     v02.00(14/06/2004)  Console
Bios Found: Japan   v01.00(17/01/2000)  Console
Bios Found: USA     v01.60(07/02/2002)  Console
Bios Found: Europe  v01.60(04/10/2001)  Console
Bios Found: Europe  v02.00(14/06/2004)  Console
Bios Found: Europe  v02.00(14/06/2004)  Console
Bios Found: Europe  v02.00(04/11/2004)  Console
Bios Found: Europe  v02.20(10/02/2006)  Console
Bios Found: Japan   v01.00(17/01/2000)  Console
Bios Found: Japan   v02.20(05/09/2006)  Console
Bios Found: USA     v01.60(07/02/2002)  Console
Bios Found: USA     v01.60(19/03/2002)  Console

Loading plugins...
    Binding GS    : C:\Program Files (x86)\PCSX2 0.9.8\Plugins\gsdx-sse4-r4600.dll
Windows 6.1.7601 (Service Pack 1 1.0)
NVIDIA GeForce GT 525M (8.17.12.6857)
    Binding PAD    : C:\Program Files (x86)\PCSX2 0.9.8\Plugins\lilypad-r4600.dll
    Binding SPU2    : C:\Program Files (x86)\PCSX2 0.9.8\Plugins\spu2-x-r4600.dll
    Binding CDVD    : C:\Program Files (x86)\PCSX2 0.9.8\Plugins\cdvdGigaherz.dll
    Binding USB    : C:\Program Files (x86)\PCSX2 0.9.8\Plugins\USBnull.dll
    Binding FW    : C:\Program Files (x86)\PCSX2 0.9.8\Plugins\FWnull.dll
    Binding DEV9    : C:\Program Files (x86)\PCSX2 0.9.8\Plugins\DEV9null.dll
Plugins loaded successfully.


Initializing plugins...
    Init GS
Windows 6.1.7601 (Service Pack 1 1.0)
NVIDIA GeForce GT 525M (8.17.12.6857)
    Init PAD
    Init SPU2
    Init CDVD
    Init USB
    Init FW
    Init DEV9
Plugins initialized successfully.

HLE Notice: ELF does not have a path.

Opening plugins...
    Opening GS
    Opening PAD
    Opening SPU2
    Opening CDVD
* CDVD: Opening drive '\\.\E:'...
* CDVD: IO thread started...
* CDVD: Disk Type: Double-Layer DVD * CDVD Disk Open: DVD, Single layer or unknown:

* * Track 1: Data (Mode 2) (2008288 sectors)
    Opening USB
    Opening FW
    Opening DEV9
McdSlot 0: C:\Users\Diogo\Documents\PCSX2\memcards\Mcd001.ps2
McdSlot 1: C:\Users\Diogo\Documents\PCSX2\memcards\Mcd002.ps2
Plugins opened successfully.
EE/iR5900-32 Recompiler Reset
    Bios Found: Europe  v02.20(10/02/2006)  Console
    BIOS rom1 module not found, skipping...
    BIOS rom2 module not found, skipping...
    BIOS erom module not found, skipping...
(UpdateVSyncRate) Mode Changed to NTSC.
(UpdateVSyncRate) FPS Limit Changed : 59,94 fps
# Initialize memory (rev:3.70, ctm:393Mhz, cpuclk:295Mhz detected)

PlayStation 2 ======== Hard reset boot
ROMGEN=2006-0210, IOP info (CPUID=1f, CACH_CONFIG=14000200, 2MB, IOP mode)
<20060210-142424,ROMconf,PS20220WC20060210.bin:11824>
# Total accessable memory size: 32 MB (B:2:8:0) (370:2:7c30)
# TLB spad=0 kernel=1:12 default=13:30 extended=31:38
# Initialize Start.
# Initialize GS ...
# Initialize INTC ...
# Initialize TIMER ...
# Initialize DMAC ...
# Initialize VU1 ...
# Initialize VIF1 ...
# Initialize GIF ...
# Initialize VU0 ...
# Initialize VIF0 ...
# Initialize IPU ...
# Initialize FPU ...
# Initialize User Memory ...
# Initialize Scratch Pad ...
# Initialize Done.

EE DECI2 Manager version 0.06 Apr  7 2005 21:09:14
  CPUID=2e20, BoardID=0, ROMGEN=2006-0210, 32M


IOP Realtime Kernel Ver.0.9.1
    Copyright 1999 (C) Sony Computer Entertainment Inc.
Reboot service module.(99/11/10)
cdvd driver module version 0.1.1 (C)SCEI
Load File service.(99/11/05)
Multi Threaded Fileio module.(99/11/15)
iop heap service (99/11/03)
loadelf: fname rom0:OSDSYS secname all
loadelf version 3.30
Input ELF format filename = rom0:OSDSYS
0 00100000 00058a48 ......
Loaded, rom0:OSDSYS
start address 0x100008
gp address 00000000
# Restart Without Memory Clear.
# Initialize GS ...
# Initialize INTC ...
# Initialize TIMER ...
# Initialize DMAC ...
# Initialize VU1 ...
# Initialize VIF1 ...
# Initialize GIF ...
# Initialize VU0 ...
# Initialize VIF0 ...
# Initialize IPU ...
# Initialize FPU ...
# Initialize Scratch Pad ...
# Restart Without Memory Clear Done.
# Restart Without Memory Clear.
# Initialize GS ...
# Initialize INTC ...
# Initialize TIMER ...
# Initialize DMAC ...
# Initialize VU1 ...
# Initialize VIF1 ...
# Initialize GIF ...
# Initialize VU0 ...
# Initialize VIF0 ...
# Initialize IPU ...
# Initialize FPU ...
# Initialize Scratch Pad ...
# Restart Without Memory Clear Done.
Get Reboot Request From EE
ROM directory not found

PlayStation 2 ======== Update rebooting..
ROM directory not found

PlayStation 2 ======== Update reboot complete
cdvdman Init
rmreset start
rmreset end
SPU:T/O [wait (reset)]
SPU:T/O [wait (reset)]
clearspu: completed
Pad Driver for OSD (2000/12/05 18:05) 392, 128

IOP Realtime Kernel Ver.0.9.1
    Copyright 1999 (C) Sony Computer Entertainment Inc.
Reboot service module.(99/11/10)
cdvd driver module version 0.1.1 (C)SCEI
Load File service.(99/11/05)
Multi Threaded Fileio module.(99/11/15)
iop heap service (99/11/03)
read/write allocate memory 4000
open name rom0:OSDVER flag 1 data 4aa78
open fd = 2
open name rom0:ROMVER flag 1 data 4aa78
open fd = 2
open name rom0:XDEV9 flag 1 data 4aa78
open fd = 2
loadmodule: fname rom0:XDEV9 args 0 arg
dev9: unknown dev9 hardware.
loadmodule: id 32, ret 1
loadmodule: fname rom0:XDEV9SERV args 0 arg
loadmodule: id -200, ret 1
open name rom0:ROMVER flag 1 data 4aa78
open fd = 2
open name rom0:FONTM flag 1 data 4aa78
open fd = 2
open name rom0:FNTIMAGE flag 1 data 4aa78
open fd = 2
open name rom0:SNDIMAGE flag 1 data 4aa78
open fd = 2
open name rom0:TEXIMAGE flag 1 data 4aa78
open fd = 2
open name rom0:ICOIMAGE flag 1 data 4aa78
open fd = 2
open name rom0:TZLIST flag 1 data 4aa78
open fd = 2
_spu_rev_offsetaddr 1f9021
### addr = 1034255  size = 28640
_spu_rev_offsetaddr 1d9021
### addr = 968719  size = 28640
get val add 3c0 type 2 ret 1ff000
get val add 1ff000 type 2 ret 0
open name rom0:PS1ID flag 1 data 4aa78
open fd = 2
open name rom0:PS1VERE flag 1 data 4aa78
open fd = 2
open name rom1:DVDID flag 1 data 4aa78
open fd = -6
(UpdateVSyncRate) Mode Changed to PAL.
(UpdateVSyncRate) FPS Limit Changed : 50,00 fps
GIFTAG warning, size exceeded VU memory size 400
GIFTAG warning, size exceeded VU memory size 400
(SYSTEM.CNF) Detected PS2 Disc = cdrom0:\SCED_532.28;1
(SYSTEM.CNF) Software version = 1.00
(SYSTEM.CNF) Disc region type = PAL
ELF (cdrom0:\SCED_532.28;1) Game CRC = 0x38174DD2, EntryPoint = 0x00100008
(SYSTEM.CNF) Detected PS2 Disc = cdrom0:\SCED_532.28;1
(SYSTEM.CNF) Software version = 1.00
(SYSTEM.CNF) Disc region type = PAL
open name cdrom0:¥SYSTEM.CNF;1 flag 5 data 4aa78
open fd = 2
ExecutePs2GameDisk
open name cdrom0:¥SYSTEM.CNF;1 flag 5 data 4aa78
open fd = 2
# Restart.
(UpdateVSyncRate) Mode Changed to NTSC.
(UpdateVSyncRate) FPS Limit Changed : 59,94 fps
# Initialize GS ...
# Initialize INTC ...
# Initialize TIMER ...
# Initialize DMAC ...
# Initialize VU1 ...
# Initialize VIF1 ...
# Initialize GIF ...
# Initialize VU0 ...
# Initialize VIF0 ...
# Initialize IPU ...
# Initialize FPU ...
# Initialize User Memory ...
# Initialize Scratch Pad ...
# Restart Done.
Get Reboot Request From EE
ROM directory not found

PlayStation 2 ======== Update rebooting..

PlayStation 2 ======== Update reboot complete
cdvdman Init

IOP Realtime Kernel Ver.0.9.1
    Copyright 1999 (C) Sony Computer Entertainment Inc.
Reboot service module.(99/11/10)
cdvd driver module version 0.1.1 (C)SCEI
Load File service.(99/11/05)
Multi Threaded Fileio module.(99/11/15)
iop heap service (99/11/03)
loadelf: fname rom0:PS2LOGO secname all
loadelf version 3.30
Input ELF format filename = rom0:PS2LOGO
0 01000000 000172c0 ..
Loaded, rom0:PS2LOGO
start address 0x1000008
gp address 00000000
# Restart Without Memory Clear.
# Initialize GS ...
# Initialize INTC ...
# Initialize TIMER ...
# Initialize DMAC ...
# Initialize VU1 ...
# Initialize VIF1 ...
# Initialize GIF ...
# Initialize VU0 ...
# Initialize VIF0 ...
# Initialize IPU ...
# Initialize FPU ...
# Initialize Scratch Pad ...
# Restart Without Memory Clear Done.
read/write allocate memory 4000
open name rom0:ROMVER flag 1 data 45d78
open fd = 2
loadmodule: fname rom0:OSDSND args 0 arg
loadmodule: id 25, ret 0
open name cdrom0:¥SYSTEM.CNF;1 flag 5 data 45d78
open fd = 2
loadmodule: fname rom0:XPARAM args 12 arg SCED_532.28
loadmodule: id 26, ret 1
_spu_rev_offsetaddr 1dfff1
### addr = 2097120  size = 32
_spu_rev_offsetaddr 1f9021
### addr = 1034255  size = 28640
(UpdateVSyncRate) Mode Changed to PAL.
(UpdateVSyncRate) FPS Limit Changed : 50,00 fps
# Restart.
(UpdateVSyncRate) Mode Changed to NTSC.
(UpdateVSyncRate) FPS Limit Changed : 59,94 fps
# Initialize GS ...
# Initialize INTC ...
# Initialize TIMER ...
# Initialize DMAC ...
# Initialize VU1 ...
# Initialize VIF1 ...
# Initialize GIF ...
# Initialize VU0 ...
# Initialize VIF0 ...
# Initialize IPU ...
# Initialize FPU ...
# Initialize User Memory ...
# Initialize Scratch Pad ...
# Restart Done.
Get Reboot Request From EE
ROM directory not found

PlayStation 2 ======== Update rebooting..

PlayStation 2 ======== Update reboot complete
cdvdman Init

IOP Realtime Kernel Ver.0.9.1
    Copyright 1999 (C) Sony Computer Entertainment Inc.
Reboot service module.(99/11/10)
cdvd driver module version 0.1.1 (C)SCEI
Load File service.(99/11/05)
Multi Threaded Fileio module.(99/11/15)
iop heap service (99/11/03)
loadelf: fname cdrom0:¥SCED_532.28;1 secname all
loadelf version 3.30
(SYSTEM.CNF) Detected PS2 Disc = cdrom0:\SCED_532.28;1
(SYSTEM.CNF) Software version = 1.00
(SYSTEM.CNF) Disc region type = PAL
Input ELF format filename = cdrom0:¥SCED_532.28;1
0 00100000 000ac400 ...........
Loaded, cdrom0:¥SCED_532.28;1
start address 0x100008
gp address 00000000
# Restart Without Memory Clear.
# Initialize GS ...
# Initialize INTC ...
# Initialize TIMER ...
# Initialize DMAC ...
# Initialize VU1 ...
# Initialize VIF1 ...
# Initialize GIF ...
# Initialize VU0 ...
# Initialize VIF0 ...
# Initialize IPU ...
# Initialize FPU ...
# Initialize Scratch Pad ...
# Restart Without Memory Clear Done.
Get Reboot Request From EE
ROM directory not found

PlayStation 2 ======== Update rebooting..

PlayStation 2 ======== Update reboot complete
cdvdman Init

IOP Realtime Kernel Ver. 2.2
    Copyright 1999-2002 (C) Sony Computer Entertainment Inc.
Reboot service module.(99/11/10)
cdvd driver module version 0.1.1 (C)SCEI
Load File service.(99/11/05)
Multi Threaded Fileio module.(99/11/15)
iop heap service (99/11/03)
loadmodule: fname cdrom0:¥SCEE_DD¥SIO2MAN.IRX;1 args 0 arg
loadmodule: id 25, ret 0
loadmodule: fname cdrom0:¥SCEE_DD¥PADMAN.IRX;1 args 0 arg
loadmodule: id 26, ret 0
(UpdateVSyncRate) Mode Changed to PAL.
(UpdateVSyncRate) FPS Limit Changed : 50,00 fps
loadmodule: fname cdrom0:¥SCEE_DD¥LIBSD.IRX;1 args 0 arg
loadmodule: id 27, ret 0
loadmodule: fname cdrom0:¥SCEE_DD¥SDRDRV.IRX;1 args 0 arg
SDR driver version 4.0.1 (C) SCEI
Exit rsd_main
loadmodule: id 28, ret 0
loadmodule: fname cdrom0:¥SCEE_DD¥CDVDSTM.IRX;1 args 0 arg
loadmodule: id 29, ret 2
Stream Buffer 1Bank 32768byte 5banks 163840byte used
loadmodule: fname cdrom0:¥SCEE_DD¥STREAM.IRX;1 args 0 arg
Exit MultiStream V7.0 Thread Load
loadmodule: id 30, ret 0
[MPEG ERROR]internal alignment error. _bstag:48
padman: *** VBLANK OVERLAP ***
Get Reboot Request From EE
Unknown device 'cdrom_stm'
Known devices are  :()  :()  :()  :()
ROM directory not found

PlayStation 2 ======== Update rebooting..

PlayStation 2 ======== Update reboot complete
cdvdman Init

IOP Realtime Kernel Ver. 2.2
    Copyright 1999-2002 (C) Sony Computer Entertainment Inc.
Reboot service module.(99/11/10)
cdvd driver module version 0.1.1 (C)SCEI
Load File service.(99/11/05)
Multi Threaded Fileio module.(99/11/15)
iop heap service (99/11/03)
# TLB spad=0 kernel=1:12 default=13:30 extended=31:38
# Restart.
(UpdateVSyncRate) Mode Changed to NTSC.
(UpdateVSyncRate) FPS Limit Changed : 59,94 fps
# Initialize GS ...
# Initialize INTC ...
# Initialize TIMER ...
# Initialize DMAC ...
# Initialize VU1 ...
# Initialize VIF1 ...
# Initialize GIF ...
# Initialize VU0 ...
# Initialize VIF0 ...
# Initialize IPU ...
# Initialize FPU ...
# Initialize User Memory ...
# Initialize Scratch Pad ...
# Restart Done.
Get Reboot Request From EE
ROM directory not found

PlayStation 2 ======== Update rebooting..

PlayStation 2 ======== Update reboot complete
cdvdman Init

IOP Realtime Kernel Ver.0.9.1
    Copyright 1999 (C) Sony Computer Entertainment Inc.
Reboot service module.(99/11/10)
cdvd driver module version 0.1.1 (C)SCEI
Load File service.(99/11/05)
Multi Threaded Fileio module.(99/11/15)
iop heap service (99/11/03)
loadelf: fname cdrom0:¥MGS¥MGS3.ELF secname all
loadelf version 3.30
(SYSTEM.CNF) Detected PS2 Disc = cdrom0:\SCED_532.28;1
(SYSTEM.CNF) Software version = 1.00
(SYSTEM.CNF) Disc region type = PAL
Input ELF format filename = cdrom0:¥MGS¥MGS3.ELF
0 00800000 000557f8 ......
Loaded, cdrom0:¥MGS¥MGS3.ELF
start address 0x8523b8
gp address 00000000
# Restart Without Memory Clear.
# Initialize GS ...
# Initialize INTC ...
# Initialize TIMER ...
# Initialize DMAC ...
# Initialize VU1 ...
# Initialize VIF1 ...
# Initialize GIF ...
# Initialize VU0 ...
# Initialize VIF0 ...
# Initialize IPU ...
# Initialize FPU ...
# Initialize Scratch Pad ...
# Restart Without Memory Clear Done.
Get Reboot Request From EE
ROM directory not found

PlayStation 2 ======== Update rebooting..

PlayStation 2 ======== Update reboot complete
cdvdman Init

IOP Realtime Kernel Ver. 2.2
    Copyright 1999-2002 (C) Sony Computer Entertainment Inc.
Reboot service module.(99/11/10)
cdvd driver module version 0.1.1 (C)SCEI
Load File service.(99/11/05)
Multi Threaded Fileio module.(99/11/15)
iop heap service (99/11/03)
loadmodule: fname cdrom0:¥MGS¥MODULES¥PLD.IRX;1 args 9 arg 00d00000
loadmodule: id 25, ret 1
(UpdateVSyncRate) Mode Changed to PAL.
(UpdateVSyncRate) FPS Limit Changed : 50,00 fps
Impossible blend for D3D: (Cd - Cs) * As + Cd
Closing plugins...
    Closing DEV9
    Closing FW
    Closing USB
    Closing CDVD
* CDVD: IO thread finished.
    Closing SPU2
    Closing PAD
    Closing GS
Plugins closed successfully.
Shutting down plugins...
Plugins shutdown successfully.
(GameDB) Unloading...
Reply
#6
funny..

PCSX2 0.9.8.r4600 - compiled on Apr 27 2011

yet you followed this?:

NEW REV settings:
PCSX2 0.9.9.r5128 - compiled on Mar 14 2012


also, make sure your driver is up to date

verify this is the driver you are using:
http://www.geforce.com/drivers/results/42588
Reply
#7
(04-15-2012, 07:04 PM)Saiki Wrote: funny..

PCSX2 0.9.8.r4600 - compiled on Apr 27 2011

yet you followed this?:

NEW REV settings:
PCSX2 0.9.9.r5128 - compiled on Mar 14 2012

What? Pretty sure I skipped that part of your guide. I only changed what was above that NEW REV bit, since I did notice the version for it.
Reply
#8
ok
1: I posted no pcsx2_vm.ini contents in 0.9.8.4600 and that matches m new one (which was modified)
2: I updated my post a tiny bit
Reply
#9
(04-15-2012, 07:12 PM)Saiki Wrote: ok
1: I posted no pcsx2_vm.ini contents in 0.9.8.4600 and that matches m new one (which was modified)
2: I updated my post a tiny bit

1: Well, that's definitely weird. But then again, it contains the settings saved when we configure the EE/IOP, etc, right? So it might just be that what you told us to change for those makes the two similar, no? Not sure, I'm just throwing ideas around.

2: Yeah, I'm already doing a restore point just in case anything goes wrong while installing the driver. Downloading it right now.
Reply
#10
update your PCSX2 and use the new SVN as well. it has gotten faster
Reply




Users browsing this thread: 1 Guest(s)