Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Onechanbara/Zombie Hunters Black Screen
#1
I have the disk for the japanese game Onechanbara that PCSX2 classifies as Simple 2000 Series - Vol. 61 - The Oane Chapara [SLPM 62525] (J) it's listed as playable but all I get is a black screen. I can play other games usually fine. Any ideas on how I can play? Trying to boot the disk on ful under Japan BIOS gives me the playstation screen and then a black screen, Under Europe BIOS it just boots into the main screen showing a disk and two memory cards. I click the disk and it just reboots. I will give any other information if needed
Reply

Sponsored links

#2
Closing plugins...
Closing DEV9
Closing FW
Closing USB
Closing CDVD
* CDVD: IO thread finished.
Closing SPU2
Closing PAD
Closing GS
Plugins closed successfully.
HLE Notice: ELF does not have a path.

Opening plugins...
Opening GS
Opening PAD
Opening SPU2
* SPU2-X: Enumerating PortAudio devices:
*** Device 0: 'Primary Sound Driver' (Windows DirectSound)
*** Device 1: 'AMD HDMI Output (AMD High Definition Audio Device)' (Windows DirectSound)
*** Device 2: 'AMD HDMI Output (AMD High Definition Audio Device)' (Windows WASAPI)
*** Device 3: 'Output (AMD HD Audio HDMI out #0)' (Windows WDM-KS)
*** Device 4: 'Speakers (Realtek HD Audio rear output)' (Windows WDM-KS)
Opening CDVD
* CDVD: Opening drive '\\.\E:'...
* CDVD: IO thread started...
Track 1: 0 mins 2 secs 0 frames
* CDVD: Disk Type: CD-ROM
* CDVD Disk Open: CD, 1 tracks (1 to 1):
* * Track 1: Data (Mode 1) (114377 sectors)
Opening USB
Opening FW
Opening DEV9
McdSlot 0: C:\Program Files (x86)\PCSX2 1.2.1\memcards\Mcd001.ps2
McdSlot 1: C:\Program Files (x86)\PCSX2 1.2.1\memcards\Mcd002.ps2
Plugins opened successfully.
EE/iR5900-32 Recompiler Reset
Bios Found: Japan v01.00(17/01/2000) Console
BIOS rom1 module not found, skipping...
BIOS rom2 module not found, skipping...
BIOS erom module not found, skipping...
# Initialize memory (rev:3.17, ctm:393Mhz, cpuclk:295Mhz )

PlayStation 2 ======== Hard reset boot
ROMGEN=2000-0117, IOP info (CPUID=1f, CACH_CONFIG=ffffffff, 2MB, IOP mode)
<20000117-050310,ROMconf,:11232>
# Total accessable memory size: 32 MB (B:2:8:0)
# TLB spad=0 kernel=1:12 default=13:30 extended=31:38
# Initialize Start.
# Initialize GS ...
# Initialize INTC ...
# Initialize TIMER ...
# Initialize DMAC ...
# Initialize VU1 ...
# Initialize VIF1 ...
# Initialize GIF ...
# Initialize VU0 ...
# Initialize VIF0 ...
# Initialize IPU ...
# Initialize FPU ...
# Initialize User Memory ...
# Initialize Scratch Pad ...
# Initialize Done.

EE DECI2 Manager version 0.06 Dec 10 1999 17:48:37
CPUID=2e20, BoardID=0, ROMGEN=2000-0117, 32M



IOP Realtime Kernel Ver.0.9.1

Copyright 1999 © Sony Computer Entertainment Inc.

Reboot service module.(99/11/10)
cdvd driver module version 0.1.1 ©SCEI
Load File service.(99/11/05)
Multi Threaded Fileio module.(99/11/15)
iop heap service (99/11/03)
loadelf: fname rom0OhmySDSYS secname all
loadelf version 3.30
Input ELF format filename = rom0OhmySDSYS
0 00200000 0008d1ec .........
Loaded, rom0OhmySDSYS
start address 0x200008
gp address 00000000
# Loader 'rom0OhmySDSYS'Tongue2c=00200008
loadmodule: fname rom0:CLEARSPU args 0 arg
clearspu: completed
loadmodule: id 25, ret 1
loadmodule: fname rom0WackoIO2MAN args 0 arg
loadmodule: id 26, ret 0
loadmodule: fname rom0:MCMAN args 0 arg
loadmodule: id 27, ret 0
loadmodule: fname rom0:MCSERV args 0 arg
loadmodule: id 28, ret 0
loadmodule: fname rom0TongueADMAN args 0 arg
Pad driver. (99/11/22)
loadmodule: id 29, ret 0
loadmodule: fname rom0OhmySDSND args 0 arg
loadmodule: id 30, ret 0
_spu_rev_offsetaddr 1f9021
### addr = 1034255 size = 28640
_spu_rev_offsetaddr 1d9021
### addr = 968719 size = 28640
read/write allocate memory 4000
open name rom0OhmySOPEN flag 1 data 41278
open fd = 2
open name rom0OhmySCLOCK flag 1 data 41278
open fd = 2
open name rom0OhmySBROWS flag 1 data 41278
open fd = 2
open name mc1:/BIEXEC-SYSTEM/OSBROWS flag 1 data 41278
open fd = -4
open name mc0:/BIEXEC-SYSTEM/OSBROWS flag 1 data 41278
open fd = -4
open name rom0OhmySFONTM flag 1 data 41278
open fd = 2
open name rom0OhmySFONTS flag 1 data 41278
open fd = 2
open name rom0:MOPEN flag 1 data 41278
open fd = 2
open name rom0:MCLOCK flag 1 data 41278
open fd = 2
open name rom0:MBROWS flag 1 data 41278
open fd = 2
open name rom0:FONTM flag 1 data 41278
open fd = 2
open name rom0:FONTS flag 1 data 41278
open fd = 2
ExecutePs2GameDisk
(SYSTEM.CNF) Detected PS2 Disc = cdrom0:\SLPM_625.25;1
(SYSTEM.CNF) Software version = 1.01
(SYSTEM.CNF) Disc region type = NTSC
ELF (cdrom0:\SLPM_625.25;1) Game CRC = 0x5D67AE48, EntryPoint = 0x00100008
open name cdrom0:¥SYSTEM.CNF;1 flag 1 data 41278
open fd = 2
Program name = cdrom0:¥SLPM_625.25;1
# Restart.
# Initialize GS ...
# Initialize INTC ...
# Initialize TIMER ...
# Initialize DMAC ...
# Initialize VU1 ...
# Initialize VIF1 ...
# Initialize GIF ...
# Initialize VU0 ...
# Initialize VIF0 ...
# Initialize IPU ...
# Initialize FPU ...
# Initialize User Memory ...
# Initialize Scratch Pad ...
# Restart Done.
Get Reboot Request From EE

PlayStation 2 ======== Soft reboot


IOP Realtime Kernel Ver.0.9.1

Copyright 1999 © Sony Computer Entertainment Inc.

Reboot service module.(99/11/10)
cdvd driver module version 0.1.1 ©SCEI
Load File service.(99/11/05)
Multi Threaded Fileio module.(99/11/15)
iop heap service (99/11/03)
loadelf: fname rom0TongueS2LOGO secname all
loadelf version 3.30
Input ELF format filename = rom0TongueS2LOGO
0 00200000 0001afe4 ..
1 0021b000 0000f068 ..
Loaded, rom0TongueS2LOGO
start address 0x200008
gp address 00000000
# LoadExec 'rom0TongueS2LOGO'Tongue2c=00200008
init rpc
OSDSND
loadmodule: fname rom0OhmySDSND args 0 arg
loadmodule: id 25, ret 0
_spu_rev_offsetaddr 1dfff1
### addr = 2097120 size = 32
_spu_rev_offsetaddr 1f9021
### addr = 1034255 size = 28640
CD Init
CD Disk Ready
# Restart.
# Initialize GS ...
# Initialize INTC ...
# Initialize TIMER ...
# Initialize DMAC ...
# Initialize VU1 ...
# Initialize VIF1 ...
# Initialize GIF ...
# Initialize VU0 ...
# Initialize VIF0 ...
# Initialize IPU ...
# Initialize FPU ...
# Initialize User Memory ...
# Initialize Scratch Pad ...
# Restart Done.
Get Reboot Request From EE

PlayStation 2 ======== Soft reboot


IOP Realtime Kernel Ver.0.9.1

Copyright 1999 © Sony Computer Entertainment Inc.

Reboot service module.(99/11/10)
cdvd driver module version 0.1.1 ©SCEI
Load File service.(99/11/05)
Multi Threaded Fileio module.(99/11/15)
iop heap service (99/11/03)
loadelf: fname cdrom0:¥SLPM_625.25;1 secname all
loadelf version 3.30
Input ELF format filename = cdrom0:¥SLPM_625.25;1
1 00100000 00117d34 ..................
2 00217d80 001702f6 ........................
Loaded, cdrom0:¥SLPM_625.25;1
start address 0x100008
gp address 00000000
# LoadExec 'cdrom0:¥SLPM_625.25;1'Tongue2c=00100008
Get Reboot Request From EE

PlayStation 2 ======== Update rebooting..

PlayStation 2 ======== Update reboot complete


IOP Realtime Kernel Ver.0.9.1

Copyright 1999 © Sony Computer Entertainment Inc.

Reboot service module.(99/11/10)
cdvd driver module version 0.1.1 ©SCEI
Load File service.(99/11/05)
Multi Threaded Fileio module.(99/11/15)
iop heap service (99/11/03)

thats the log I got trying to pay it if that helps
Reply
#3
What version of PCSX2 are you using? It works fine for me on the latest GIT build
[Image: ref_sig_anim.gif]
Like our Facebook Page and visit our Facebook Group!
Reply
#4
(06-13-2014, 12:59 AM)refraction Wrote: What version of PCSX2 are you using? It works fine for me on the latest GIT build
imn using the latest build and no dice, just black screen with
near 60 fps and somewhere around 30-40% EE

just loaded iso of the european zombie hunters 2 and it plays perfect so far..I wanted to try and play my disc of the first one from japan and the black screen happens
Reply
#5
Mine is SLPM 62525 which i believe is the japanese version. If your disc doesnt load directly, try making an ISO of it and using the internal ISO reader, as that is how im playing it.
[Image: ref_sig_anim.gif]
Like our Facebook Page and visit our Facebook Group!
Reply
#6
(06-13-2014, 02:02 AM)refraction Wrote: Mine is SLPM 62525 which i believe is the japanese version. If your disc doesnt load directly, try making an ISO of it and using the internal ISO reader, as that is how im playing it.

i'll attempt that, might work better that way
Reply
#7
I recommend you use imgburn, its most successful for me Smile
[Image: ref_sig_anim.gif]
Like our Facebook Page and visit our Facebook Group!
Reply
#8
it may just be a bad disk....i'll try cleaning it
Reply
#9
i have a feeling that was it, I need to fine tune the graphics settings to look better but it runs
Reply




Users browsing this thread: 1 Guest(s)