PSCX2 Black Screen

[refraction]

I think so Also the latency on Port Audio can go down to like 20ms, where XAudio bottoms out still at around 50-70ms, which is no good for rhythm games.

[CrowTheAlmighty]

Opening plugins...
Opening GS
Opening PAD
Opening SPU2
Opening CDVD
isoFile open ok: C:\Users\Owner\Documents\PCSX2\bios\bios\Digimon World - Data Squad (USA).iso
Image type = DVD
* CDVD Disk Open: DVD, Single layer or unknown:
* * Track 1: Data (Mode 1) (1422576 sectors)
Opening USB
Opening FW
Opening DEV9
AMD Radeon HD 8550G + 8600/8700M Dual Graphics (8.17.10.1247)
McdSlot 0: C:\Users\Owner\Documents\PCSX2\memcards\Mcd001.ps2
McdSlot 1: C:\Users\Owner\Documents\PCSX2\memcards\Mcd002.ps2
McdSlot 2: [disabled]
McdSlot 3: [disabled]
McdSlot 4: [disabled]
Plugins opened successfully.
EE/iR5900-32 Recompiler Reset
Bios Found: USA v02.20(10/02/2006) Console
BIOS rom1 module not found, skipping...
BIOS rom2 module not found, skipping...
BIOS erom module not found, skipping...
(SYSTEM.CNF) Detected PS2 Disc = cdrom0:\SLUS_215.98;1
(SYSTEM.CNF) Software version = 1.00
(SYSTEM.CNF) Disc region type = NTSC
ELF (cdrom0:\SLUS_215.98;1) Game CRC = 0x7E582398, EntryPoint = 0x00100134
(SYSTEM.CNF) Detected PS2 Disc = cdrom0:\SLUS_215.98;1
(SYSTEM.CNF) Software version = 1.00
(SYSTEM.CNF) Disc region type = NTSC
(SYSTEM.CNF) Detected PS2 Disc = cdrom0:\SLUS_215.98;1
(SYSTEM.CNF) Software version = 1.00
(SYSTEM.CNF) Disc region type = NTSC

Thats the log I had for the last game I played until it shut off

Also, change my what to what now???

[Blyss Sarania]

Config->Audio->plugin settings. Change Xaudio2 to Portaudio or Dsound.

[CrowTheAlmighty]

Config->Audio->plugin settings. Change Xaudio2 to Portaudio or Dsound.

How do you change it there????????

[Saiki]

honestly..

spu2-x.ini:

Code:

[MIXING]
Interpolation=4
Disable_Effects=FALSE
DealiasFilter=FALSE
FinalVolume=100
[OUTPUT]
Synch_Mode=0
SpeakerConfiguration=0
DplDecodingLevel=0
Latency=100
Output_Module=dsound
[DSP PLUGIN]
Filename=
ModuleNum=0
Enabled=FALSE
[WAVEOUT]
Device=default
Buffer_Count=4
[DSOUNDOUT]
Device=default
Buffer_Count=5
Disable_Global_Focus=FALSE
Use_Hardware=FALSE
[PORTAUDIO]
HostApi=WASAPI
Device=default
Wasapi_Exclusive_Mode=FALSE
Minimal_Suggested_Latency=TRUE
Manual_Suggested_Latency_MS=20
[SOUNDTOUCH]
SequenceLengthMS=30
SeekWindowMS=20
OverlapMS=10
[DEBUG]
Global_Enable=FALSE
Show_Messages=FALSE
Show_Messages_Key_On_Off=FALSE
Show_Messages_Voice_Off=FALSE
Show_Messages_DMA_Transfer=FALSE
Show_Messages_AutoDMA=FALSE
Show_Messages_Overruns=FALSE
Show_Messages_CacheStats=FALSE
Log_Register_Access=FALSE
Log_DMA_Transfers=FALSE
Log_WAVE_Output=FALSE
Dump_Info=FALSE
Dump_Memory=FALSE
Dump_Regs=FALSE
Visual_Debug_Enabled=FALSE
Logs_Folder=logs
Dumps_Folder=logs
Access_Log_Filename=SPU2Log.txt
DMA4Log_Filename=SPU2dma4.dat
DMA7Log_Filename=SPU2dma7.dat
Info_Dump_Filename=SPU2Cores.txt
Mem_Dump_Filename=SPU2mem.dat
Reg_Dump_Filename=SPU2regs.dat

[CrowTheAlmighty]

honestly..

spu2-x.ini:

Code:

[MIXING]
Interpolation=4
Disable_Effects=FALSE
DealiasFilter=FALSE
FinalVolume=100
[OUTPUT]
Synch_Mode=0
SpeakerConfiguration=0
DplDecodingLevel=0
Latency=100
Output_Module=dsound
[DSP PLUGIN]
Filename=
ModuleNum=0
Enabled=FALSE
[WAVEOUT]
Device=default
Buffer_Count=4
[DSOUNDOUT]
Device=default
Buffer_Count=5
Disable_Global_Focus=FALSE
Use_Hardware=FALSE
[PORTAUDIO]
HostApi=WASAPI
Device=default
Wasapi_Exclusive_Mode=FALSE
Minimal_Suggested_Latency=TRUE
Manual_Suggested_Latency_MS=20
[SOUNDTOUCH]
SequenceLengthMS=30
SeekWindowMS=20
OverlapMS=10
[DEBUG]
Global_Enable=FALSE
Show_Messages=FALSE
Show_Messages_Key_On_Off=FALSE
Show_Messages_Voice_Off=FALSE
Show_Messages_DMA_Transfer=FALSE
Show_Messages_AutoDMA=FALSE
Show_Messages_Overruns=FALSE
Show_Messages_CacheStats=FALSE
Log_Register_Access=FALSE
Log_DMA_Transfers=FALSE
Log_WAVE_Output=FALSE
Dump_Info=FALSE
Dump_Memory=FALSE
Dump_Regs=FALSE
Visual_Debug_Enabled=FALSE
Logs_Folder=logs
Dumps_Folder=logs
Access_Log_Filename=SPU2Log.txt
DMA4Log_Filename=SPU2dma4.dat
DMA7Log_Filename=SPU2dma7.dat
Info_Dump_Filename=SPU2Cores.txt
Mem_Dump_Filename=SPU2mem.dat
Reg_Dump_Filename=SPU2regs.dat

Whats that mean?

[Saiki]

How to apply:
note: If inside your pcsx2 folder you do not see "portable.ini" go to (my) documents and find PCSX2 there.
Find the folder "PCSX2" Inside you will find several folders (bios, plugins, snaps, etc.) Locate "inis"
inside you'll see several files:

Match up the ini names with the ones I provide and follow instructions carefully.

[CrowTheAlmighty]

I... Dont... What?

[Nobbs66]

go to My Documents

Then the PCSX2 folder

Then the ini folder

Open the SPU2-X.ini file

Delete everything inside of it.

Finally paste the code Saiki posted into it.

Then click save.

[Blyss Sarania]

Or you could do it the easy way which I already told you exactly how to do.

Config->Audio->plugin settings. Change Xaudio2 to Portaudio or Dsound.