Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Pcsx2 configuration help
#1
Whenever I start my emulation of Tony Hawk's Underground, its fine until I start to play then alot of the fps goes down and everything looks like its going in slow motion, how can i fix this?
Reply

Sponsored links

#2
Check out http://wiki.pcsx2.net/index.php/Tony_Haw...nderground . The main website is where I get all my information on how to config your settings for a certain game (and to see if it is playable). Also, don't be afraid to use save states to play around with your settings to see what works best.
Reply
#3
I'm sorry i'm really new to emulaters, and this is the first time i've tried to do this. I'm on pcsx2 version 1.00.
And these are my computer specs. I think:

Machine name: HOME-PC
Operating System: Windows Vista™ Home Premium (6.0, Build 6002) Service Pack 2 (6002.vistasp2_gdr.130308-1436)
Language: English (Regional Setting: English)
System Manufacturer: Dell Inc.
System Model: Inspiron 530
BIOS: Phoenix - AwardBIOS v6.00PG
Processor: Intel® Core™2 Duo CPU E7300 @ 2.66GHz (2 CPUs), ~2.7GHz
Memory: 3326MB RAM
Page File: 2539MB used, 4339MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 11
DX Setup Parameters: Not found
DxDiag Version: 7.00.6002.18107 32bit Unicode
Card name: ATI Radeon HD 3450
Manufacturer: ATI Technologies Inc.
Chip type: ATI Radeon Graphics Processor (0x95C5)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_95C5&SUBSYS_90181028&REV_00
Display Memory: 1659 MB
Dedicated Memory: 252 MB
Shared Memory: 1407 MB
Current Mode: 1680 x 1050 (32 bit) (60Hz)
Monitor: Generic PnP Monitor
Driver Name: atidxx32.dll,atidxx64,atiumdag.dll,atiumdva.dat,atiumd64,atiumd6a,atitmm64
Driver Version: 7.15.0010.0119 (English)
DDI Version: 10.1
BGRA Supported: No
Driver Attributes: Final Retail
Driver Date/Size: 6/13/2008 07:34:10, 1554944 bytes
WHQL Logo'd: Yes
WHQL Date Stamp:
Device Identifier: {D7B71EE2-D685-11CF-DF71-12B0A1C2CA35}
Vendor ID: 0x1002
Device ID: 0x95C5
SubSys ID: 0x90181028
Revision ID: 0x0000
Revision ID: 0x0000
Video Accel: ModeMPEG2_A ModeMPEG2_C
Deinterlace Caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
{552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{5A54A0C9-C7EC-4BD9-8EDE-F3C75DC4393B}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
I hope this helps, and thank you AKZander for the information
Reply
#4
Maybe your graphics card or processor is too weak for this game, I never emulated it myself.
Specs: Intel Pentium P5 @ 60 Mhz, 1 Gigabyte HDD, OS: DOS
Reply
#5
Probably, but i seem to be able to play alot of other games fine on my computer, and i can start Tony Hawk up, but when i get inside the game it gets all weird and feels like its in slow motion and the audio gets out of whack. I can navigate through the menus just fine for some reason though.
Reply
#6
My uncle myself had that same processor, but his graphics card was a dedicated nvidia one. As far as I remember it ran a majority of PS2 games on it. I don't think your graphics card is powerful enough. Have you tried using speedhacks. What are your GSDX settings?
EDIT: I've looked up your graphics card and have seen that its not very good for gaming.

(06-11-2013, 04:04 AM)Website Wrote: the Radeon HD 3450 is decidedly not the card for you if you play games.
Specs: Intel Pentium P5 @ 60 Mhz, 1 Gigabyte HDD, OS: DOS
Reply
#7
For GSDX I have it on GSDX 5534 (MSVC 16.00/ SSE2) 0.1.16 {gsdx32-sse2-r5350}
Man and I really wanted to play my old favorite game too Sad
Reply
#8
[attachment=44580][attachment=44580]The setting of GSDX here ill show it to you click that and click on Video (GS) then click Plugin settings
Specs: Intel Pentium P5 @ 60 Mhz, 1 Gigabyte HDD, OS: DOS
Reply
#9
Okay it says it is, Direct3D9 (Hardware0, But I can go to Direct3D10 also

I meant (Hardware)
Reply
#10
What do the ee% & gs% say when you get slowdowns ?
CPU : I7 2600K Oc'ed @ 4.2Ghz
Mobo : Intel P67 southbridge
GPU : NVIDIA Geforce GTX 750 Ti
RAM : 6 Go
Reply




Users browsing this thread: 1 Guest(s)