Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Problem running Okami
#1
Hello everyone I've been looking around for a while about a problem I'm having with Okami. I have the iso file right where it should be along with the others and they still work fine, but whenever I try to run Okami using full boot it gets past the playstation logo and stops right after a a black screen. the FPS is still going at the top, but nothing else happens.

Here's a report of everything that happens when I try to boot it up.


PCSX2 0.9.7.r3876 (modded) - compiled on Oct 5 2010
Savestate version: 0x8b4c0000

x86-32 Init:
CPU vendor name = AuthenticAMD
FamilyID = 3
x86Family = AMD Phenom™ II X4 B60 Processor
CPU speed = 3.299 ghz
Cores = 16 physical [4 logical]
x86PType = Standard OEM
x86Flags = 178bfbff 00802009
x86EFlags = efd3fbff

x86 Features Detected:
MMX.. SSE.. SSE2.. SSE3
MMX2 .. 3DNOW .. 3DNOW2.. SSE4a

Allocating memory for recompilers...

Loading plugins...
Binding GS : C:\Program Files\PCSX2 0.9.7\Plugins\gsdx-sse2-r3878.dll
Windows 5.1.2600 (Service Pack 3 3.0)
NVIDIA GeForce GTX 460 (6.14.12.6099)
Binding PAD : C:\Program Files\PCSX2 0.9.7\Plugins\lilypad-r3878.dll
Binding SPU2 : C:\Program Files\PCSX2 0.9.7\Plugins\spu2-x-r3878.dll
Binding CDVD : C:\Program Files\PCSX2 0.9.7\Plugins\cdvdGigaherz.dll
Binding USB : C:\Program Files\PCSX2 0.9.7\Plugins\USBnull.dll
Binding FW : C:\Program Files\PCSX2 0.9.7\Plugins\FWnull.dll
Binding DEV9 : C:\Program Files\PCSX2 0.9.7\Plugins\DEV9null.dll
Plugins loaded successfully.

(GameDB) 8934 games on record (loaded in 217ms)
HLE Warning: ELF does not have a path!!


Initializing plugins...
Init GS
Windows 5.1.2600 (Service Pack 3 3.0)
NVIDIA GeForce GTX 460 (6.14.12.6099)
Init PAD
Init SPU2
Init CDVD
Init USB
Init FW
Init DEV9
Plugins initialized successfully.

Allocating memory for the PS2 virtual machine...
Opening plugins...
Opening GS
Opening PAD
Opening SPU2
Opening CDVD
detected blocksize = 2048
isoOpen(DVD): C:\Documents and Settings\Robert Kohlman\My Documents\PCSX2\et-okami.ISO ok.
The iso has 1937440 blocks (size 2048).
The iso offset is 0, and the block offset is 24.
* CDVD Disk Open: DVD, Single layer or unknown:
* * Track 1: Data (Mode 1) (1937440 sectors)
(IsoFS) Block 0x10: Primary partition info.
Opening USB
Opening FW
Opening DEV9
McdSlot 0: C:\Documents and Settings\Robert Kohlman\My Documents\PCSX2\memcards\Mcd001.ps2
McdSlot 1: C:\Documents and Settings\Robert Kohlman\My Documents\PCSX2\memcards\Mcd002.ps2
Plugins opened successfully.
EE/iR5900-32 Recompiler Reset
Bios Version 1.60
Load Bios Warning: rom1 module not found, skipping... (this is not an error)
Load Bios Warning: rom2 module not found, skipping... (this is not an error)
Load Bios Warning: erom module not found, skipping... (this is not an error)
(UpdateVSyncRate) Mode Changed to NTSC.
... with user configured refresh rate: 30.00 Hz
(UpdateVSyncRate) FPS Limit Changed : 60.00 fps
GIFTAG error, size exceeded VU memory size 3ff
(IsoFS) Block 0x10: Primary partition info.
(SYSTEM.CNF) Detected PS2 Disc = cdrom0:\SLUS_211.15;1
(SYSTEM.CNF) Software version = 1.01
(SYSTEM.CNF) Disc region type = NTSC
(IsoFS) Block 0x10: Primary partition info.
Initializing Elf: 3903532 bytes
ELF (cdrom0:\SLUS_211.15;1) CRC=0x21068223, EntryPoint=0x00100008
(IsoFS) Block 0x10: Primary partition info.
(SYSTEM.CNF) Detected PS2 Disc = cdrom0:\SLUS_211.15;1
(SYSTEM.CNF) Software version = 1.01
(SYSTEM.CNF) Disc region type = NTSC
DecSet Write: 53
DecSet Write: 00
(IsoFS) Block 0x10: Primary partition info.
(SYSTEM.CNF) Detected PS2 Disc = cdrom0:\SLUS_211.15;1
(SYSTEM.CNF) Software version = 1.01
(SYSTEM.CNF) Disc region type = NTSC
(IsoFS) Block 0x10: Primary partition info.
(SYSTEM.CNF) Detected PS2 Disc = cdrom0:\SLUS_211.15;1
(SYSTEM.CNF) Software version = 1.01
(SYSTEM.CNF) Disc region type = NTSC
(R5900) Re-executed ELF Entry point (ignored) [addr=0x00100008]


It does this everytime and yet I've seen plenty of videos of people playing Okami perfectly fine. What gives? Also this isn't using a physical disc just an image. Before you say anything about piracy I do own the game, but on Wii.

Thanks for the help!

Sponsored links

#2
if mounted into a 3rd party software like Daemon Tools, unmount it.
then perform a fast-boot.
CPU : I7 2600K Oc'ed @ 4.2Ghz
Mobo : Intel P67 southbridge
GPU : NVIDIA Geforce GTX 750 Ti
RAM : 6 Go
#3
As jesalvein says unmount it from any image program.
Also try to redump your iso from the original DVD, you may have a bad iso (happened to me a couple times ).
If it doesn't work then probably the DVD is scratched and unreadable.
[Image: 7p7vvf-6.png]
#4
My iso may just be bad. It's a shame though since I love this game. I lent the Wii version to a friend and I got the urge to play it again as well. I must be doing something wrong if everyone else can get it right.
#5
(03-29-2011, 09:42 PM)SilverZXZ Wrote: ...
et-okami.ISO
...
Before you say anything about piracy I do own the game, but on Wii.
Wait..what? I thought the name of the ISO looked a bit suspicious Tongue2

I thought owning the game on another system (Wii) & then obtaining the same game on a different system (PS2) without actually purchasing the game for the *PS2* is considered piracy?

But a few years back, I remember Okami actually working on PCSX2 when I paid my only real life Friend a 4 week visit a few years ago.
Ivy Bridge 3770K @ 3.9GHz - MSI TwinFrozr GTX680 4GB...
...Nerpyderp.
#6
Quote:Before you say anything about piracy I do own the game, but on Wii.

yup, I missed that one.
If you don't own it on PS2, that's still piracy.

closed & warned, then
CPU : I7 2600K Oc'ed @ 4.2Ghz
Mobo : Intel P67 southbridge
GPU : NVIDIA Geforce GTX 750 Ti
RAM : 6 Go




Users browsing this thread: 1 Guest(s)