02-03-2015, 07:24 AM (This post was last modified: 02-03-2015, 07:26 AM by Pringles01.)
Hey guys. So, I wanted to use a save for Shin Megami Tensei III Nocturne. And I got it set up, however, when I finished setting it up. I had to go to dinner. So I closed PCSX2, and when I got back. The save was in the memory card, however, I've still technically got the save. But I can't access it, if that makes sense. Pic related is what I mean
02-03-2015, 08:11 PM (This post was last modified: 02-03-2015, 08:12 PM by Ryudo.)
(02-03-2015, 03:04 PM)jlwmanagement Wrote: That looks like a save for the NTSC version of the game. Are you sure that is the copy you have and not PAL or JAP?
Doesn't matter. This is the PS2 Memory Card manager he's looking at. PAL and NTSC saves both show up there.
He's loading two different Memory Cards apparently; one in PCSX2, and a completely different one in myMC.
02-04-2015, 03:41 AM (This post was last modified: 02-04-2015, 03:43 AM by jlwmanagement.)
I hate to say this but that just doesnt seem to be possible. If the BIOS tells you there is nothing on that mem card, then it is one of the following:
1) empty
2) not the right region for that BIOS (this may not be accurate)
3) not plugged into pcsx2
Are you sure pcsx2 is set to look for that mem card in its location?
Also not to nitpick but the BIOS says that mem card is completely empty (7998 KB free) but mmc says there is 265 KB being used. Unless I am mistaken, the screenshots do not add up.
8000 KB - 256 KB != 7998 KB
Intel Core i5-8600K @ 4.5 GHz
GeForce GTX 1080 SC2 Stock
ASRock Z370 Taichi LGA 1151 mobo
CORSAIR Vengeance LPX 16GB 2400 DDR4 RAM
SAMSUNG 970 EVO M.2 2280 500GB PCIe SSD
Indigo Xtreme Thermal Interface Material
Phanteks Enthoo Pro ES614P Black Steel Case
EVGA SuperNOVA 750 G2 220-G2-0750-XR PSU
Windows 10 64-bit
(02-04-2015, 03:41 AM)jlwmanagement Wrote: 2) not the right region for that BIOS (this may not be accurate)
The bios region doesn't matter
Start pcsx2 and go to Config=>Memory Card and see in the path is pointing the path from where you are opening the card in mymc and if the card is selected in some slot(one or two)
02-04-2015, 02:49 PM (This post was last modified: 02-04-2015, 02:49 PM by Ryudo.)
(02-04-2015, 03:41 AM)jlwmanagement Wrote: I hate to say this but that just doesnt seem to be possible. If the BIOS tells you there is nothing on that mem card, then it is one of the following:
1) empty
2) not the right region for that BIOS (this may not be accurate)
3) not plugged into pcsx2
Are you sure pcsx2 is set to look for that mem card in its location?
Also not to nitpick but the BIOS says that mem card is completely empty (7998 KB free) but mmc says there is 265 KB being used. Unless I am mistaken, the screenshots do not add up.
8000 KB - 256 KB != 7998 KB
Region doesn't matter. Already mentioned that.
PS2's Memory Card manager ALWAYS shows Saves, whether it's PAL, NTSC-U, or NTSC-J. Same goes for myMC. They're 'managers', they're not games with specific region requirements.
These are clearly 2 different Memory Cards. One that is blank (empty), and one that contains 2 Save Files.
Like vsub said, the path in PCSX2 is leading to another path as the one that he's using to load up the Memory Card in myMC.