..:: PCSX2 Forums ::..

Hey guys!
I tried to load my final fantasy x on my pcsx0.9.7 but all i got was a blank screen and this log:


Opening plugins...
Opening GS
Opening PAD
Opening SPU2
Opening CDVD
detected blocksize = 2048
isoOpen(DVD): C:\Users\SeanWhoIsCool\Desktop\FINAL_FANTASY_X.ISO ok.
The iso has 2201280 blocks (size 2048).
The isos offset is 0, and the block offset is 24.
* CDVD Disk Open: DVD, Single layer or unknown:
* * Track 1: Data (Mode 1) (2201280 sectors)
(IsoFS) Block 0x10: Primary partition info.
Opening USB
Opening FW
Opening DEV9
McdSlot 0: C:\Users\SeanWhoIsCool\Documents\pcsx2\memcards\Mcd001.ps2
McdSlot 1: C:\Users\SeanWhoIsCool\Documents\pcsx2\memcards\Mcd002.ps2
Plugins opened successfully.
Issuing EE/iR5900-32 Recompiler Reset
Bios Version 1.60
Load Bios Warning: rom1 module not found, skipping... (this is not an error)
Load Bios Warning: rom2 module not found, skipping... (this is not an error)
Load Bios Warning: erom module not found, skipping... (this is not an error)
(UpdateVSyncRate) Mode Changed to NTSC.
(UpdateVSyncRate) FPS Limit Changed : 59.94 fps
# Initialize memory (rev:3.63, ctm:393Mhz, cpuclk:295Mhz detected)
# Total accessable memory size: 32 MB (B:2:8:0) (363:2:7c30)
Closing DEV9
Closing FW
Closing USB
Closing CDVD
Closing SPU2
Closing PAD
Closing GS



Help please

strange, I don't see any error in that log.
did you mount your image in any 3rd party software before launching it ?
if so, unmount it.

If by "load bios warning" as per the thread title...

Quote:Load Bios Warning: rom1 module not found, skipping... (this is not an error)
Load Bios Warning: rom2 module not found, skipping... (this is not an error)
Load Bios Warning: erom module not found, skipping... (this is not an error)

I wouldn't worry about those lines.

These aren't errors (as stated)
Look, almost all these strange behaviors starts from the application being in the C:\Program Files or it's (x86) 'hermano' folder. If the emulator is there consider reinstalling it somewhere else and trying again. Any other folder, like C:\Games\... for example, does the trick.

if just moving the entire folder remember to delete the Pcsx2.ini and let the emulator rebuild it with the correct paths, you'll need to redo the memory card path too.

PS: Use this new found knowledge to avoid installing any game in those folders from now on, they are trouble.

(08-09-2010, 08:49 AM)jesalvein Wrote: [ -> ]strange, I don't see any error in that log.
did you mount your image in any 3rd party software before launching it ?
if so, unmount it.

Nope i did not. still cant

---

(08-09-2010, 10:14 AM)nosisab Ken Keleh Wrote: [ -> ]These aren't errors (as stated)
Look, almost all these strange behaviors starts from the application being in the C:\Program Files or it's (x86) 'hermano' folder. If the emulator is there consider reinstalling it somewhere else and trying again. Any other folder, like C:\Games\... for example, does the trick.

if just moving the entire folder remember to delete the Pcsx2.ini and let the emulator rebuild it with the correct paths, you'll need to redo the memory card path too.

PS: Use this new found knowledge to avoid installing any game in those folders from now on, they are trouble.

Hello, thaanks! i tried what you did but it still doesnt work... still there's a blank screen. any idea?

tell us the plugins you're using, it the GSnull that would explain. Screenshots would be better.

(08-09-2010, 12:59 PM)nosisab Ken Keleh Wrote: [ -> ]tell us the plugins you're using, it the GSnull that would explain. Screenshots would be better.

Im pretty much of a noob at this so i attached the image

So caan? and thx for all the help.