..:: PCSX2 Forums ::..

(09-02-2014, 09:54 PM)Startropic1 Wrote: [ -> ]Ok so how do I uninstall the DS3 xinput driver that scpserver installed and restore my bluetooth adapter back to it's original state? I used the uninstall option in the scp installer, but when I uninstall the drivers from the device manager and reconnect the bluetooth adapter windows keeps installing "BTH DS3 Device."

I suppose a simple sc remove command line should work.
Never tried, though.

Quote:Also this thread links to DS4 instructions in the first post. Again, this thread is just too convoluted and does not make itself clear.

Are you serious ?
Jhebbel's thread has a full tutorial in its first post.
If it's too "convoluted" for you, just keep using MiJ. That's your best option if you are unable to follow a tutorial.

guys, sorry you all maybe sick of this. but i have problem to connect with bluetooth connection.

USB cable is work for me
this is the latest log and my scp server screen.
somehow, after i remove the usb cable of my ds3, he wont connect to the dongle
and keep flashing 4 light... and the status of the pad 1 is reserved

can you please help me? this is my 4th week being unable to connect it and read almost 300 pages of this post

(09-05-2014, 07:38 PM)eikichi357 Wrote: [ -> ]guys, sorry you all maybe sick of this. but i have problem to connect with bluetooth connection.

USB cable is work for me
this is the latest log and my scp server screen.
somehow, after i remove the usb cable of my ds3, he wont connect to the dongle
and keep flashing 4 light... and the status of the pad 1 is reserved

can you please help me? this is my 4th week being unable to connect it and read almost 300 pages of this post

Assuming that controller, cable and dongle work perfectly.

Try pressing the reset button, and try again. If doesnt work, try manually pairing it, stop the service/server and run ScpPair.exe, see what is the mac address of your bluetooth (i believe its 00:15:83:CC:6E:A0) and set it, the controller should now be paired to your to your bluetooth address. And work wireless, now when you plug or unplug it should work.

My apologies about the thread I already made, I just read it gets more attention here and will more likely be answered.

I have 2 DS3 controllers connected to my computer, both USB, both drivers are working and both recognized by Windows. However when I install the SCP drivers, only one controller works flawlessly. And the player 1 light lights up on the controller that works, however on the other controller there's no lights at all (and its Xinput emulation doesn't work either), all its native functionality is also disabled, like games that natively support DS3 won't respond to the controller anymore.

I hope this can be solved quickly because I'm having friends coming over in a few days for 4 player games.

Related images:






If there's any other information I have to give, I'll do it.

UPDATE: The player 1 light keeps flashing on the second controller, it still doesn't work however.

i have tried your suggestion to manually pairing it, stop the servjce and server and run scppair.exe . this is what it shows. but when i unplug the controller, they still not connecting....(still 4 light blinking at the controller)

(09-05-2014, 09:09 PM)SageX85 Wrote: [ -> ]Assuming that controller, cable and dongle work perfectly.

Try pressing the reset button, and try again. If doesnt work, try manually pairing it, stop the service/server and run ScpPair.exe, see what is the mac address of your bluetooth (i believe its 00:15:83:CC:6E:A0) and set it, the controller should now be paired to your to your bluetooth address. And work wireless, now when you plug or unplug it should work.

I am sort of new here so forgive me for my ignorance...

I installed the drivers... After that, my Pc crashed and says that my Cpu Temperature is critical(77ºC).

Did anyone encountered the same problem as I am? If so how did you resolve it?

I installed the latest version and I have a ps3 controller and a normal usb cable... if that helps...

I would really appreciate if someone helped me on this problem.

is there a way to not run this as a service and just as a program that turns of when i click the red x in the upper right corner? And is there a way i can use Bluetooth Without Zadig?

(09-06-2014, 04:31 AM)eikichi357 Wrote: [ -> ]i have tried your suggestion to manually pairing it, stop the servjce and server and run scppair.exe . this is what it shows. but when i unplug the controller, they still not connecting....(still 4 light blinking at the controller)

My only guess its that maybe your bluetooth isnt fully compatible :\

(09-06-2014, 10:02 AM)imkakoy Wrote: [ -> ]I am sort of new here so forgive me for my ignorance...

I installed the drivers... After that, my Pc crashed and says that my Cpu Temperature is critical(77ºC).

Did anyone encountered the same problem as I am? If so how did you resolve it?

I installed the latest version and I have a ps3 controller and a normal usb cable... if that helps...

I would really appreciate if someone helped me on this problem.

This should have nothing to do with it, per se. This program isnt CPU intesive. Maybe try changing the heatsink on your CPU? unless you are using a laptop. What game/emu/software were you using? Those are the most likely cause of the heat.

(09-06-2014, 10:43 PM)roli Wrote: [ -> ]is there a way to not run this as a service and just as a program that turns of when i click the red x in the upper right corner? And is there a way i can use Bluetooth Without Zadig?

There are 2 ways.
1) To delete a service, on command promt with administrator rights


BUT since this could break something, you are better just having it disabled.

2) On windows 7 click on Start Menu type Services, there look for SCP DS3 Service. Right click on it and properties. Startup type "Disabled" Now it wont start and you can just use the server.

Hey could anyone give me an idea as to why the ps/home button doesn't work on my dualshock 3 in any games? Everything else works perfectly. It doesn't seem to think the button works in any dolphin configuration settings which is the only program i used to check it it detected any inputs, which it didn't for the ps/home button. Also, the controller disconnects every few mins when i have it connected via bluetooth.

Also, ever since iv'e downloaded the drivers better ds3 no longer detects the controller getting plugged in even if the scp is not running. Is this supposed to happen? The ps/home button works fine with ds3 so i was wondering how i could get both to work and whenever i play a game which required the ps/home button I could use ds3, when not i would use the wrapper.

(09-07-2014, 09:09 PM)max2 Wrote: [ -> ]Hey could anyone give me an idea as to why the ps/home button doesn't work on my dualshock 3 in any games? Everything else works perfectly. It doesn't seem to think the button works in any dolphin configuration settings which is the only program i used to check it it detected any inputs, which it didn't for the ps/home button. Also, the controller disconnects every few mins when i have it connected via bluetooth.

Also, ever since iv'e downloaded the drivers better ds3 no longer detects the controller getting plugged in even if the scp is not running. Is this supposed to happen? The ps/home button works fine with ds3 so i was wondering how i could get both to work and whenever i play a game which required the ps/home button I could use ds3, when not i would use the wrapper.

1.-What this does is this "emulates" an Xbox 360 controller. The 360 controller has the guide button, this button only works on XInput, and for it to work it has to be supported by the software, almost no emu/game/software supports it, the only programs where i've seen native support are steam, mednafen, games 4 windows live client, pinnaclegameprofile, antimicro (another joy to kb mapper).

2.-If it gets disconnected its because the conection is lost, either your adapter isnt to good, or something creates interference, i can plug mine on the back of the PC, or it gives me all kind of problems.

3.-What did you expect? this changes the drivers of the controller and the bluetooth dongle, BetterDS3 requires the motioninjoy drivers. Again, no game for windows has native support for the guide button, and almost no emulator has XInput support, most are for DInput, where the guide button doesnt even work at all, Im pretty sure that with BetterDS3 and the MiJ drivers you had configured the controller as DInput, and the PS Button configured as a regular button.