10-08-2014, 12:44 AM
Hi guy, I need a help, I recently got a new lenova laptop with integarted bloototh reciver, I was unable to install the driver at first to my new device (which ID was not present in the motion joy driver) but I did what was written in the motion joy forum:
and pad had started working, but the problem is every time I restart Windows 8.1 I have to do whatever with the driver and the motion joy itself, the problem is I don't really know what I have to do to make it connect but after few driver loads and pad pairing it start working untill the new reboot... could you please come up with some kind of solution? On my old laptop I had a dongle and everyting was working really fine but now, it's really irritating to make it work every single time. My BT device id is like this: USB\VID_8087&PID_07DC.
Quote:Aight guys I created an account just to help with this issue, a premodified MijXinput.inf will not help. This is what you need to do.
Look at your driver manager
One of them has an X on it correct?
get the name of it, example mine was
USB\VID_8087&PID_07DA&REV_7869
Remove the rev and it'll look like thia
USB\VID_8087&PID_07DA (you will need this later)
go to C:\Program Files\MotioninJoy\ds3\drivers and copy the MijXinput.inf to your desktop
Open it and ctrl+f (this will enable you to search)
search bluetooth (there will be several but do 1 at a time.)
remember the USB\BLAHBALHCRAPBLAH?
Now simply add this to the front %MIJ.DeviceName%=CC_Install, so itll look like this
%MIJ.DeviceName%=CC_Install, USB\VID_8087&PID_07DA
highlight this crap ^ and copy
now under each search result in MijXinput for bluetooth you ctrl+v to paste
at the end it'll be under each. Now search MijXinput.cat (should be near the top)
delete the whole line with MijXinput.cat, if you search again it shouldn't be there.
save as MijXinput-mod.inf or MijXinput2.inf (so you have a backup)
go back to the folder C:\Program Files\MotioninJoy\ds3\drivers
and delete the old one (you have a spare on your desktop) and put the modified one in. Change the name to MijXinput.inf and confirm it.
now as icebluto was saying, you need to enable unsigned drivers install, I'll even tell you how from here.
(assuming you are windows 8 like me)
move your mouse to the right and go to search, and search "advance". click on the setting tab right under search and you should have "advance startup options".
scroll to the bottom and there will be advance startup and you will click restart. (BEFORE YOU DO THAT! TAKE A PHOTO OF THIS OR SOMETHING TO REMEMBER!)
On restart on the menu
Select troubleshoot
Then select Advanced Options
then Windows Startup Settings
and finally Click Restart.
you will now be prompt with a new window for me it was 7, idk for you but it is labeled
"Disable Driver signature Enforcement"
press that key and you will boot.
when you launch up the ds3 tool this time you can install the X'd one. Windows will prompt you for a confirmation and tell it "duh i've gone this far".
the X' will now be a check and you can continue with the tutorial on how to do bluetooth!
and pad had started working, but the problem is every time I restart Windows 8.1 I have to do whatever with the driver and the motion joy itself, the problem is I don't really know what I have to do to make it connect but after few driver loads and pad pairing it start working untill the new reboot... could you please come up with some kind of solution? On my old laptop I had a dongle and everyting was working really fine but now, it's really irritating to make it work every single time. My BT device id is like this: USB\VID_8087&PID_07DC.