(06-08-2015, 10:36 PM)BeNeMeSh Wrote: [ -> ]Now the bad thing is bluetooth.
There is no vibration in bth , and it has delays as hell
Yes vibration doesn't work over bluetooth, may be the driver or scp doesn't support it? However, I don't like it because my hands loses control when the controller vibrates.
As of delayed response, it could due to many reasons. i.e
Bad or low quality bluetooth dongle
Bad or low quality internal antenna in bluetooth dongle
Old or low bluetooth dongle specifications
Other signal interference
Same goes for bluetooth that is present ps3 controller if its a fake.
And also not all front USB ports are good. I have seen some have slow data transfer.
You could try these:
A different bluetooth dongle
Rear USB ports
A different computer
And if issue still persists, then its probably the controllers fault.
Thanks...
Best Regards
Anyway to enable vibration in BTH connection?
Is this issue common?
Yeah it's very common.
I've not seen anyone solve it.
Hi i had been using the tool almost a year without issues, but i had recently changed my ssd and reinstalled it and now i dont know f i have a problem.
This is the situation, i installed my ds4 and is showing all the info in the SCP Monitor (host address, hci, lmp, at Pad 1) and is working fine even bluetooth.
But is not recognized in the SCP Server (host address: Disconnected and Pad 1: Disconnected)
Why SCP Server doesnt display the same info as SCP Monitor??
(06-09-2015, 11:41 PM)drm81 Wrote: [ -> ]Hi i had been using the tool almost a year without issues, but i had recently changed my ssd and reinstalled it and now i dont know f i have a problem.
This is the situation, i installed my ds4 and is showing all the info in the SCP Monitor (host address, hci, lmp, at Pad 1) and is working fine even bluetooth.
But is not recognized in the SCP Server (host address: Disconnected and Pad 1: Disconnected)
Why SCP Server doesnt display the same info as SCP Monitor??
Stop the Scp service from services and then run the SCP server.
My Dualshock 3 don't work. The drivers are installed, the service is running, but there is no reaction. Tested on win7-64 and win8.1-64. I used for usb connection only.
I just received one of
these and it works! (in case anyone looking for cheap ones) It's got VID_0A12&PID_0001&REV_7558.
Now, as I play on the PS3 every now and then, how am I meant to pair this with my PC? When I first installed this, I plugged in both the dongle and the DS3. When I unplugged the controller it immediately paired with and started up the PS3, though. I unplugged the power cable from the PS3, then pressed PS button, and it paired with PC. I'm not gonna do that every time.
would the 1.2.2.175 works with windows 10 ?
(06-09-2015, 05:26 AM)CRACING Wrote: [ -> ]Yes vibration doesn't work over bluetooth, may be the driver or scp doesn't support it? However, I don't like it because my hands loses control when the controller vibrates.
As of delayed response, it could due to many reasons. i.e
Bad or low quality bluetooth dongle
Bad or low quality internal antenna in bluetooth dongle
Old or low bluetooth dongle specifications
Other signal interference
Same goes for bluetooth that is present ps3 controller if its a fake.
And also not all front USB ports are good. I have seen some have slow data transfer.
You could try these:
A different bluetooth dongle
Rear USB ports
A different computer
And if issue still persists, then its probably the controllers fault.
Thanks...
Best Regards
Hello guys, i had the same problem about bth lag. I fixed the problem plugging my BTH device in other USB port (USB 3.0 port this time). Windows Reinstall the driver (BTH DS3 device) and goodbye lag.
BUT my controller vibration isn't working via bth :/
PS: I'm using a fake ps3 controller.
USB 3.0 has more delays for me