Actually, nevermind, turns out what I had was a printer BT dongle.
I'm having an issue with the USB cable though, none of my pressure sensitive buttons work, any ideas how can I get it working?
No need, got it working. Thanks.
Just wanted to report a bug in SCP-DS3-Driver-Package-0.8.0.100.
For some reason, if rumble activates in a game the controller disconnects and immediately reconnects, but if I use SCPUser and use test rumble there, it always works. Only sometimes does x360ce test cause the same problems, but Chasmdemo and Dark Souls always cause it to disconnect. Easy fix is to use x360ce to disable force feedback, but I will provide logs to see if I can't help you out.
Controller rev is A1. Logs are attached, I only reproduced the issue once in the log on this boot, but it repeats removal/arrival repeatedly.
If you need any more info let me know.
edit: I just remembered this also happened with MotionInJoy and the fix there was also to disable it. This controller is fairly unused and looks brand new from the store. I got it at a Walmart.
@GenericHero, what is your bluetooth adapter?
Not connected via bluetooth, it's through USB.
Nevermind, I finally figured it out. Works very well so far.
Hi! Would you mind adding support for this bluetooth dongle?
USB\VID_05AC&PID_821F&REV_0100
USB\VID_05AC&PID_821F
Thanks!
Hi Scarlet
This is not a major problem, so treat my post as a minimum priority post.
I have a pci express card that has an outgoing usb 3.0 internal header, which I connect with my front panel on my PC case. This card is a quality card, probably the best on the market, made by silverstone. To be exact it is this one:
http://www.silverstonetek.com/product.ph...64&area=en
I have the latest driver installed.
I also have a Mushkin Ventura Pro pendrive. Now to the problem.
When I have the pendrive plugged into the usb3.0 port in my front panel, and the bluetooth dongle in the other (2.0) port somehow the range of the bluetooth is very much shortened to less than 1 meter. When I activate my DS3 I have to draw it very close to the dongle for it to pair. If I hold it in my hand say 2 meters away, the led's blink constantly without connecting. BUT while holding the gamepad in the same position with one hand, if I remove the pendrive with the other hand, my ds3 pairs immidietly.
I tried many configurations and this is the only case this problem arrises. I have 3 usb ports in total on front panel, and if I put my pendrive in the one of the usb 2.0 ports and put dongle in other port, the problem doesn't occur. So to summarize the problem only happens when I have pendrive plugged into my usb 3.0 port (that is connected through my silverstone card).
Scarlet, any thoughts?
Again, the dongle and your driver works perfectly, so this is a minor side-problem I have, but I wanted to ask you anyways. Maybe you stumbled upon this problem, or have some suggestions to me.
cheers
Lucas
Hi there! Is there a way to disable force-feedback entirely? I skimmed through multiple pages but didn't see anything. Thanks!
Was there a way to blacklist Bluetooth adapters? I've been following this thread pretty well and I thought I saw a program Scarlet made or talked about but I can't find it in the thread.