Failed DNS test
#1
I'm trying to play MGO1 by savemgo.
so I have setup my DNS in network access DVD to there DNS.
And every time I launch a network diagnose it waits 5-10 sec and says "Failed DNS test" I have tried everything
I have tried all devices in DEV9 plugin
I have tried to bridge connections between my wi-fi and Ethernet connections with all devices in DEV9 plugin
I have tried to connect my Ethernet cable and use all devices in DEV9 plugin
this is my log file attempting to test connection with my router's DNS
Code:
lo0    Vendor:(N/A)  Product:(N/A)
    Link encap:Local Loopback  
    inet addr:127.0.0.1  Bcast:127.0.0.1  Mask:255.0.0.0
    UP LOOPBACK MULTICAST  MTU:33228
    RX packets:8 errors:0 dropped:0
    TX packets:8 errors:0
    collisions: 0 noproto:0

smap0    Vendor:SCE  Product:Ethernet (Network Adaptor)
    Link encap:Ethernet  HWaddr 76:6d:61:63:30:31
    Media:10baseT half-duplex (active)
    inet addr:192.168.1.171  Bcast:192.168.1.255  Mask:255.255.255.0
    BROADCAST MULTICAST  MTU:1500
    RX packets:14757 errors:0 dropped:0
    TX packets:5169 errors:0
rDMA
    collisions: 0 noproto:0

in server_func and fno is 1
fname is [mc0:/BWNETCNF/BWNETCNF], usr_name is [Combination1]
decoding
what we're loading is this:
-----------------------
display_name     : "ifc000.dat + dev000.dat"
attach_ifc       : "ifc000.dat"
attach_dev       : "dev000.dat"
address          : "192.168.1.171"
netmask          : "255.255.255.0"
auth_name        : "(null)"
auth_key         : "(null)"
dhcp_host_name   : "(null)"
padman: *** VBLANK OVERLAP ***
peer_name        : "(null)"
type(ifc)        : "3"
dhcp             : "0"
want.dns1_nego   : "ff"
want.dns2_nego   : "ff"
allow.f_auth     : "0"
allow.auth       : "0"
pppoe            : "ff"
want.prc_nego    : "ff"
want.acc_nego    : "ff"
want.accm_nego   : "ff"
mtu              : "-1"
idle_timeout(ifc): "-1"
redial_count     : "-1"
gateway          : "192.168.1.1"
dns1_address     : "192.3.157.163"
dns2_address     : "192.3.157.164"
type(dev)        : "3"
vendor           : "SCE"
product          : "Ethernet (Network Adaptor)"
chat_additional  : "(null)"
outside_number   : "(null)"
outside_delay    : "(null)"
dialing_type     : "-1"
phy_config       : "1"
idle_timeout(dev): "-1"
-----------------------
current return value is going to be 0
updating type
env.ifc->pppoe is 255, authname is (null)
in server_func and fno is 2
pppoe is 255, auth_name is (null)
eenetctl: (ifname:smap0, af:2) display_name=ifc000.dat + dev000.dat
eenetctl: (ifname:smap0, af:2) DETACHED --Attach-> STOPPED
eenetctl: Waiting I/F Event
eenetctl: Waiting I/F Event
eenetctl: (ifname:smap0, af:2) STOPPED --Up-> STARTING
eenetctl: Waiting I/F Event
rDMA
rDMA
* pcap io: Sending 60 byte packet.
duplicate IP address 192.168.1.171 sent from link address 20:6a:8a:3d:dc:bb
* pcap io: Sending 60 byte packet.
duplicate IP address 192.168.1.171 sent from link address 20:6a:8a:3d:dc:bb
eenetctl: (ifname=smap0) [ 192.168.1.171 ]
eenetctl: (ifname:smap0, af:2) STARTING --Start-> STARTED
eenetctl: Waiting I/F Event
lo0    Vendor:(N/A)  Product:(N/A)
    Link encap:Local Loopback  
    inet addr:127.0.0.1  Bcast:127.0.0.1  Mask:255.0.0.0
    UP LOOPBACK MULTICAST  MTU:33228
    RX packets:8 errors:0 dropped:0
    TX packets:8 errors:0
    collisions: 0 noproto:0

smap0    Vendor:SCE  Product:Ethernet (Network Adaptor)
    Link encap:Ethernet  HWaddr 76:6d:61:63:30:31
    Media:10baseT half-duplex (active)
    inet addr:192.168.1.171  Bcast:192.168.1.255  Mask:255.255.255.0
    UP BROADCAST RUNNING MULTICAST  MTU:1500
    RX packets:14775 errors:0 dropped:0
    TX packets:5171 errors:0
    collisions: 0 noproto:0

* pcap io: Sending 60 byte packet.
* pcap io: Sending 70 byte packet.
duplicate IP address 192.168.1.171 sent from link address 20:6a:8a:3d:dc:bb
* pcap io: Sending 70 byte packet.
* pcap io: Sending 60 byte packet.
duplicate IP address 192.168.1.171 sent from link address 20:6a:8a:3d:dc:bb
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 60 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
rDMA
rDMA
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 60 byte packet.
* pcap io: Sending 60 byte packet.
* pcap io: Sending 60 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
rDMA
* pcap io: Sending 70 byte packet.
* pcap io: Sending 60 byte packet.
* pcap io: Sending 84 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
rDMA
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 60 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
rDMA
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
rDMA
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
rDMA
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
rDMA
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
rDMA
* pcap io: Sending 70 byte packet.
* pcap io: Sending 60 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 84 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
rDMA
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
rDMA
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
Warped read, was=52, sz=70, sz-was=18
* pcap io: Sending 70 byte packet.
rDMA
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
rDMA
* pcap io: Sending 60 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
rDMA
rDMA
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
rDMA
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
rDMA
rDMA
rDMA
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 84 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
rDMA
rDMA
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
rDMA
rDMA
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
rDMA
* pcap io: Sending 70 byte packet.
rDMA
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
rDMA
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
rDMA
rDMA
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 84 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
rDMA
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
rDMA
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
rDMA
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
rDMA
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 60 byte packet.
* pcap io: Sending 60 byte packet.
* pcap io: Sending 70 byte packet.
rDMA
rDMA
rDMA
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
* pcap io: Sending 70 byte packet.
eenetctl: (ifname:smap0, af:2) STARTED --Down-> STOPPING
eenetctl: Waiting I/F Event
eenetctl: Waiting I/F Event
rDMA
rDMA
rDMA
rDMA
eenetctl: (ifname:smap0, af:2) STOPPING --Stop-> STOPPED
eenetctl: Waiting I/F Event
eenetctl: Waiting I/F Event
rDMA
rDMA
rDMA
rDMA
rDMA
rDMA
rDMA
devman: unregister device smap0 (id = 0).
eenetctl: (ifname:smap0, af:2) STOPPED --Detach-> DETACHING
eenetctl: Waiting I/F Event
eenetctl: (ifname:smap0, af:2) DETACHING --Stop-> DETACHED
eenetctl: Waiting I/F Event
eenetctl: Waiting I/F Event
eenetctl: end of main function
ent_smap: ent_smap stopped.
ent_cnf stopped.
eenetctl stopped.
ent_devm stopped.
loadmodule: fname cdrom0:¥NAD¥IRX¥ENT_DEVM.IRX;1 args 0 arg
ent_devm (version 1.1.23)
loadmodule: id 64, ret 2
loadmodule: fname cdrom0:¥NAD¥IRX¥EENETCTL.IRX;1 args 0 arg
loadmodule: id 65, ret 2
loadmodule: fname cdrom0:¥NAD¥IRX¥ENT_CNF.IRX;1 args 0 arg
loadmodule: id 66, ret 2
loadmodule: fname cdrom0:¥NAD¥IRX¥ENT_SMAP.IRX;1 args 0 arg
HDD ethernet driver (version 1.1.23)
BD Byteswapping disabled.
SMAP_R_EMAC3_TxMODE1_L 32bit write 380f0000
loadmodule: id 67, ret 2
Manual block @ 0016F210 : size =  2  page/offs = 0x0016F/0x210  inpgsz = 8  clearcnt = 1
Manual block @ 0016F180 : size =  7  page/offs = 0x0016F/0x180  inpgsz = 28  clearcnt = 1
Manual block @ 0016F19C : size =  4  page/offs = 0x0016F/0x19C  inpgsz = 16  clearcnt = 1
Manual block @ 0016F1E0 : size =  2  page/offs = 0x0016F/0x1E0  inpgsz = 8  clearcnt = 1
Manual block @ 0016F158 : size =  4  page/offs = 0x0016F/0x158  inpgsz = 16  clearcnt = 1
Manual block @ 0016F174 : size =  2  page/offs = 0x0016F/0x174  inpgsz = 8  clearcnt = 1
Manual block @ 0016F1E8 : size =  2  page/offs = 0x0016F/0x1E8  inpgsz = 8  clearcnt = 1
Manual block @ 0016F1F0 : size =  7  page/offs = 0x0016F/0x1F0  inpgsz = 28  clearcnt = 1
*** libeenet version 1.1.29 ***
eenetctl: Waiting I/F Event
smap: iop_out = 0x0, ee_in = 0x0
smap: iop_device_ready = 0x1, ee_device_ready = 0x1
smap: iop_control = 0x80000f81, ee_state = 0x80000f82, device_id = 0
ent_smap: auto mode (BMCR=0x1201 ANAR=0x5e0)
eenetctl: (ifname:smap0, af:2) configuration for this I/F is not set yet
eenetctl: (ifname:smap0, af:2) DETACHED --Attach-> STOPPED
eenetctl: Waiting I/F Event
eenetctl: Waiting I/F Event
ent_smap: 10BaseT Half Duplex Mode without Flow Control
smap0: cable connected.
**** LOOPING ***
^ here am using pcap bridge: Broadcom NetLink blah blah...
Help!
Reply

Sponsored links

#2
Can you show me a screenshot of your dev9 plugin settings?
[Image: ref-sig-anim.gif]

Reply
#3
[Image: 0TrlmeR.png]
Reply
#4
Have you put the differebt dns servers in your adapter config? As the official servers no longer exist.
[Image: ref-sig-anim.gif]

Reply
#5
yes I have tried with my router IP and auto dns and savemgo dns (https://snake.savemgo.com/)
Reply
#6
and have you tried using bridged mode instead of switch?
[Image: ref-sig-anim.gif]

Reply
#7
Why does one need to use a different dns? Can't one just manipulate the hosts-file?
Reply
#8
the emulator doesn't use your hosts file, the game does direct dns lookups and the official servers don't exist, so you have to use the alternate DNS. you are changing it in the Network config program (PS2 Network Access Disc) running under the emulator right, not your PC's DNS?
[Image: ref-sig-anim.gif]

Reply
#9
yes I have used bridge mode
Reply
#10
and have you done what i said in my last post?
[Image: ref-sig-anim.gif]

Reply




Users browsing this thread: 1 Guest(s)