02-19-2011, 05:20 AM
Hi, i created a bin file of Street Fighter EX 3 and it loads up to a certain point and gives this error and sits on a black screen.
Is it my bin file being incorrectly made??
Code:
Closing plugins...
Closing DEV9
Closing FW
Closing USB
Closing CDVD
Closing SPU2
Closing PAD
Closing GS
Plugins closed successfully.
Open virtual disk tray
HLE Warning: ELF does not have a path!!
Opening plugins...
Opening GS
Opening PAD
Opening SPU2
Opening CDVD
detected blocksize = 2352
isoOpen(CD): G:\Emulators\PCSX2 0.9.7\Roms\SFEX3\SFEX3.BIN ok.
The iso has 298405 blocks (size 2352).
The iso offset is 0, and the block offset is 0.
* CDVD Disk Open: CD, 1 tracks (1 to 1):
* * Track 1: Data (Mode 1) (298405 sectors)
(IsoFS) Block 0x10: Primary partition info.
(IsoFS) Block 0x11: Extended partition info.
Opening USB
Opening FW
Opening DEV9
McdSlot 0: C:\Users\Herbi\Documents\PCSX2\memcards\Mcd001.ps2
McdSlot 1: C:\Users\Herbi\Documents\PCSX2\memcards\Mcd002.ps2
Plugins opened successfully.
EE/iR5900-32 Recompiler Reset
Bios Version 1.60
Load Bios Warning: rom1 module not found, skipping... (this is not an error)
Load Bios Warning: rom2 module not found, skipping... (this is not an error)
Load Bios Warning: erom module not found, skipping... (this is not an error)
GIFTAG error, size exceeded VU memory size 3ff
(IsoFS) Block 0x10: Primary partition info.
(IsoFS) Block 0x11: Extended partition info.
(SYSTEM.CNF) Detected PS2 Disc = cdrom0:\SLUS_201.30;1
(SYSTEM.CNF) Software version = 1.00
(SYSTEM.CNF) Disc region type = NTSC
(IsoFS) Block 0x10: Primary partition info.
(IsoFS) Block 0x11: Extended partition info.
Initializing Elf: 5644094 bytes
ELF (cdrom0:\SLUS_201.30;1) CRC=0x72B3802A, EntryPoint=0x00100008
(IsoFS) Block 0x10: Primary partition info.
(IsoFS) Block 0x11: Extended partition info.
(SYSTEM.CNF) Detected PS2 Disc = cdrom0:\SLUS_201.30;1
(SYSTEM.CNF) Software version = 1.00
(SYSTEM.CNF) Disc region type = NTSC
DecSet Write: 53
DecSet Write: 00
(IsoFS) Block 0x10: Primary partition info.
(IsoFS) Block 0x11: Extended partition info.
(SYSTEM.CNF) Detected PS2 Disc = cdrom0:\SLUS_201.30;1
(SYSTEM.CNF) Software version = 1.00
(SYSTEM.CNF) Disc region type = NTSC
(IsoFS) Block 0x10: Primary partition info.
(IsoFS) Block 0x11: Extended partition info.
(SYSTEM.CNF) Detected PS2 Disc = cdrom0:\SLUS_201.30;1
(SYSTEM.CNF) Software version = 1.00
(SYSTEM.CNF) Disc region type = NTSC
(R5900) Re-executed ELF Entry point (ignored) [addr=0x00100008]
(EE pc:001079AC) TLB Miss, addr=0x5 [load]
(EE pc:001079B4) TLB Miss, addr=0xc [load]
(EE pc:001079BC) TLB Miss, addr=0xb [load]
Is it my bin file being incorrectly made??
Motherboard: MSI 785GM-P45
Processor: AMD Athlon II 64 X4 Quad Core Processor @ 3.2 Ghz
Graphics Card: ASUS 9600GT 512Mb GDDR3
Memory: Mushkin Enhanced 2x2GB
HDD: Seagate 500GB
Processor: AMD Athlon II 64 X4 Quad Core Processor @ 3.2 Ghz
Graphics Card: ASUS 9600GT 512Mb GDDR3
Memory: Mushkin Enhanced 2x2GB
HDD: Seagate 500GB