06-09-2011, 03:34 AM
Alright I'll try and make do then. Thanks for all the help and quick replies!
Kingdom Hearts slow down issue
|
06-09-2011, 03:34 AM
Alright I'll try and make do then. Thanks for all the help and quick replies!
06-09-2011, 04:07 AM
hmm try using gsdx sse41
i'm sorry for my bad english.
Model: Acer Aspire 4736G OS: Genuine™Microsoft® Windows®7 Home Premium 64bit CPU: Intel® Core™2 Duo processor T6600 @ 2.2GHz GPU: NVIDIA® GeForce® G 105M • 512MB DDR2 VRAM RAM: 4GB DDR3 HDD: 500GB WDC
06-09-2011, 05:44 AM
Wow, forget I even switched to SSSE3, changed it back to 4.1 but no improvement. Thanks for the suggestion though.
06-09-2011, 07:36 AM
set the clamping settings to default, messing with those is almost never required short for a few games which require random values.
disable dynamicly toggle vsync, it doesn't do crap without the vsync setting above it anyway and Aero provides vsyncing as a byproduct of using Wx with the WxPaint/Compositor through DirectX. Set the speedhacks slider to balanced. this has no known side effects at all in the KH games. Increase the internal resolution slightly so you're actually giving the gpu some work (workloads below a certain point may prevent the driver from clockign the card up from 2D clocks). set allowhacks=1 in the gsdx.ini and set skipdraw to 3 if it is set to 0.
06-09-2011, 04:20 PM
(This post was last modified: 06-09-2011, 07:29 PM by SilentReset.)
(06-09-2011, 07:36 AM)Squall Leonhart Wrote: set the clamping settings to default, messing with those is almost never required short for a few games which require random values. Tried it out, but it only made it a little slower :/. I've set the priority of psx2 to high in the task manager too so it should be getting enough power just to mention. also didn't see any allowhacks setting so i changed the last three settings to 1 aside from skipdraw which is 3. ex. [Settings] Renderer=3 Interlace=0 AspectRatio=0 upscale_multiplier=2 windowed=0 filter=1 paltex=0 vsync=0 logz=1 fba=1 aa1=0 nativeres=1 resx=1024 resy=1024 swthreads=1 msaa=0 UserHacks_AlphaHack=1 UserHacks_HalfPixelOffset=1 UserHacks_SkipDraw=3
06-09-2011, 08:43 PM
(This post was last modified: 06-09-2011, 08:48 PM by MyDreamName.)
Hi, I am again not being part of the solution, but I wanted to let you know that most likely you're not going to get much performance boost by messing with the priority in your task manager unless you are using a single core CPU (which you are not).
Want to contribute? Don't know how? Check out the PCSX2 Wiki page!
Keep safe with MyWOT. I have everything...
06-09-2011, 08:45 PM
I see, all input is welcome so thanks for the tip .
06-10-2011, 06:16 PM
(This post was last modified: 06-10-2011, 06:16 PM by SilentReset.)
(06-10-2011, 02:20 AM)Squall Leonhart Wrote: its probably turbo mode causing inconsistent clock rates. Thought of that before but if it were the case the whole game would likely be affected and the 15 minutes or so before then were smooth as can be. Not to mention it's ONLY when I'm facing that one direction.
06-10-2011, 09:18 PM
Wow, just checked KH out again at a friends house and the frame rate problem doesn't seem to be happening anymore just got a little glitch box on the ground following me around that I'll be trying to get rid of now.
|
« Next Oldest | Next Newest »
|