Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Low speed in Harvest moon
#1
Hello.
My problem is about Harvest moon a wonderful life. The game has a low speed(almost 60%). I run other games on this PC, but they run well.
Here's the gsfx settings:

//--------------------------#[CHOOSE EFFECTS]#--------------------------------\\

//#[ANTIALIASING TECHNIQUES]  [1=ON|0=OFF]  #READ: For best results: Use gsdx fx antialiasing OR filtering. Not both together.
#define UHQ_FXAA                    0      //# High Quality Fast Approximate Anti Aliasing. If GSdx's internal FXAA is also enabled, this equals FXAA2x.[3D]

//#[FS SCALING TECHNIQUES]    [1=ON|0=OFF]  #READ: For best results: Only enable one type of filtering at one time. Use post antialiasing OR FS filtering, not both.
#define BILINEAR_FILTERING          0    //# Bilinear Fullscreen Texture Filtering. BiLinear filtering - light to medium filtering of textures.[2D]
#define BICUBIC_FILTERING          0    //# Bicubic Fullscreen Texture Filtering. BiCubic filtering - medium to strong filtering of textures.[2D]
#define GAUSSIAN_FILTERING          0    //# Gaussian Fullscreen Texture Filtering. Gaussian filtering - strong to extra strong filtering of textures.[2D]
#define BICUBLIC_SCALER            0    //# Bicubic Interpolation Scaling. Uses BCS on up scaling, and downsampling of games, for smoother scaling.
#define LANCZOS_SCALER              0    //# Lanczos Interpolation Scaling. Uses Lanczos on up scaling, and downsampling of games for smoother scaling.

//#[LIGHTING & COLOUR]        [1=ON|0=OFF]  #READ: These can all be turned on & off independently of each other. [For High Dynamic Range(HDR) use Bloom & Tonemapping together]
#define BLENDED_BLOOM              1      //# High Quality SP Bloom. Soft lighting with blending techniques, for a natural looking bloom.
#define SCENE_TONEMAPPING          1      //# HDR Scene Tonemapping. Layered component conversion, and applies scene tone mapping.
#define COLOR_CORRECTION            0      //# Component Color Correction. Colorspace conversion, with correction curves, and multiple palette types.
#define CROSS_PROCESSING            0      //# Filmic Cross Processing. Alters the tone of the scene, crossing the game's color set, with another.
#define GAMMA_CORRECTION            0      //# RGB Gamma Correction. Fixed expansion to variable compression gamma correction curve.
#define PIXEL_VIBRANCE              0      //# Pixel Vibrance. Intelligently adjusts pixel vibrance depending on original color saturation.
#define COLOR_GRADING              0      //# Post-Complement Colour Grading. Alters individual colour components on a scene, to enhance selected colour tones.
#define TEXTURE_SHARPEN            0      //# Bicubic Texture Unsharpen Mask. Looks similar to a negative texture LOD bias. Enhances texture fidelity.
#define CURVE_CONTRAST              0      //# S-Curve Scene Contrast Enhancement. Locally adjusts contrast using a four-point cubic bezier spline.
#define CEL_SHADING                0      //# PX Cel Shading. Simulates the look of animation/toon. Typically best suited for animated style games.
#define PAINT_SHADING              0      //# Paint Shading. Creates the effect of a painted scene. Adapted from ENB series, it's pretty performance heavy.
#define COLOR_TEMPERATURE          0      //# White Point Temperature. Changes the temperature of the image from D65 white point reference.

//#[TV EMU TECHNIQUES]        [1=ON|0=OFF]  #READ: These can all be turned on & off independently of each other. These effects are typically used to simulated older TVs/CRT etc.
#define LOTTES_CRT                  0    //# Timothy Lottes CRT emulation effect. Similar to scanlines, but with more control options. Ported by request.
#define SCANLINES                  0    //# Scanlines to simulate the look of a CRT TV. Typically suited to sprite games. Note: Works best at Native Res.
#define VIGNETTE                    0    //# Darkens the edges of the screen, to make it look more like it was shot with a camera lens.
#define DEBANDING                  0    //# Applies a debanding effect, to minimize banding artifacts. Which is usually very prevalent in skyboxes (for example).
#define SP_DITHERING                0    //# Subpixel Dithering to simulate more colors than your monitor can display. Smoothes gradiants, this can reduce color banding.
#define PX_BORDER                  0    //# Creates a pixel border, as a workaround for the bright edge that using hardware antialiasing(MSAA) can cause. (Ported by request from SFX).

/*------------------------------------------------------------------------------
                          [EFFECT CONFIG OPTIONS]
------------------------------------------------------------------------------*/

//##[UHQ_FXAA]
#define FxaaSubpixMax 0.00                //[0.00 to 1.00] Amount of subpixel aliasing removal. Higher values: softer. Lower values: sharper. 0.00: Edge only.
#define FxaaQuality 4                      //[1|2|3|4] Overall Fxaa quality preset (pixel coverage). 1: Low, 2: Medium, 3: High, 4: Ultra.
#define FxaaEarlyExit 1                    //[0 or 1] Use Fxaa early exit pathing. When enabled: Only luma edge pixels are antialiased. When disabled: the entire scene is antialiased(FSAA).

//##[BILINEAR_FILTERING]
#define FilterStrength 1.00                //[0.10 to 1.50] Bilinear filtering strength. Controls the overall strength of the filtering.
#define OffsetAmount 0.0                  //[0.0 to 1.5] Pixel offset amount. If you want to use an st offset, 0.5 is generally recommended. 0.0 is off.

//##[BICUBIC_FILTERING]
#define Interpolation Triangular          //[CatMullRom, Bell, BSpline, Triangular, Cubic] Type of interpolation to use. From left to right is lighter<-->stronger filtering.
#define BicubicStrength 0.75              //[0.10 to 1.50] Bicubic filtering strength. Controls the overall strength of the filtering.
#define PixelOffset 0.0                    //[0.0 to 1.5] Pixel offset amount. If you want to use an st offset, 0.5 is generally recommended. 0.0 is off.

//##[GAUSSIAN_FILTERING]
#define FilterAmount 1.00                  //[0.10 to 1.50] Gaussian filtering strength. Controls the overall strength of the filtering.
#define GaussianSpread 0.75                //[0.50 to 4.00] The filtering spread & offset levels. Controls the sampling spread of the filtering.

//##[BLENDED BLOOM]
#define BloomType BlendGlow                //[BlendGlow, BlendAddGlow, BlendAddLight, BlendScreen, BlendLuma, BlendOverlay] The type of blended bloom. Light<->Dark.
#define BloomStrength 0.220                //[0.000 to 1.000] Overall strength of the bloom. You may want to readjust for each blend type.
#define BlendStrength 1.000                //[0.000 to 1.000] Strength of the blending. This is a modifier based on bloom. 1.0 equates to 100% strength.
#define BloomDefocus 2.000                //[1.000 to 4.000] The initial bloom defocus value. Increases the softness of light, bright objects, etc.
#define BloomWidth 3.200                  //[1.000 to 8.000] Width of the bloom. Adjusts the width of the spread and soft glow. Scales with BloomStrength.
#define BloomReds 0.040                    //[0.000 to 1.000] Red channel correction of the bloom. Raising will increase the bloom of reds.
#define BloomGreens 0.030                  //[0.000 to 1.000] Green channel correction of the bloom. Raising will increase the bloom of greens.
#define BloomBlues 0.020                  //[0.000 to 1.000] Blue channel correction of the bloom. Raising will increase the bloom of blues.

//##[SCENE TONEMAPPING]
#define TonemapType 1                      //[0|1|2|3] The base tone mapping operator. 0 is LDR, 1 is HDR(original), 2 & 3 are Filmic HDR(slight grading).
#define TonemapMask 0                      //[0 or 1] Enables an ALU tone masking curve. Produces a nice cinematic look. Suits some games more than others.
#define MaskStrength 0.25                  //[0.000 to 1.000] Strength of the tone masking. Higher for a stronger effect. This is a dependency of TonemapMask.
#define ToneAmount 0.300                  //[0.050 to 1.000] Tonemap strength (tone correction). Higher for stronger tone mapping, lower for lighter.
#define BlackLevels 0.060                  //[0.000 to 1.000] Black level balance (shadow correction). Increase to deepen blacks, lower to lighten them.
#define Exposure 1.000                    //[0.100 to 2.000] White correction (brightness). Higher values for more scene exposure, lower for less.
#define Luminance 1.000                    //[0.100 to 2.000] Luminance average (luminance correction). Higher values will lower scene luminance average.
#define WhitePoint 1.000                  //[0.100 to 2.000] Whitepoint average (wp lum correction). Higher values will lower the maximum scene white point.

//##[COLOR CORRECTION]
#define CorrectionPalette 1                //[1|2|3|4|5] The colorspace palette type. 1: RGB, 2: YXY, 3: XYZ, 4: HSV, 5: YUV. Each one will produce a different combination of shades & hues.
#define ChannelR 1.20                      //[0.00 to 8.00] R(1), Y(2), X(3), H(4), Y(5) component channel varies with the colorspace used. Higher values increase correction strength.
#define ChannelG 1.60                      //[0.00 to 8.00] G(1), X(2), Y(3), S(4), U(5) component channel varies with the colorspace used. Higher values increase correction strength.
#define ChannelB 1.80                      //[0.00 to 8.00] B(1), Y(2), Z(3), V(4), V(5) component channel varies with the colorspace used. Higher values increase correction strength.
#define PaletteStrength 2.00              //[0.00 to 4.00] The interpolated strength ratio between the base color, and the corrected color. Raise to increase saturation.

//##[CROSS PROCESSING]
#define FilmicProcess 1                    //[1|2|3] The color conversion type for the cross process. 1: cool, 2: warm, 3: dusk. You can achieve different results with each.
#define RedShift 0.50                      //[0.10 to 1.00] Red color component shift of the filmic processing. Alters the red balance of the shift.
#define GreenShift 0.50                    //[0.10 to 1.00] Green color component shift of the filmic processing. Alters the green balance of the shift.
#define BlueShift 0.50                    //[0.10 to 1.00] Blue color component shift of the filmic processing. Alters the blue balance of the shift.
#define ShiftRatio 0.50                    //[0.10 to 2.00] The blending ratio for the base color and the color shift. Higher for a stronger effect.

//##[TEXTURE SHARPEN]
#define SharpenStrength 0.75              //[0.10 to 2.00] Strength of the texture sharpening effect. This is the maximum strength that will be used.
#define SharpenClamp 0.015                //[0.005 to 0.500] Reduces the clamping/limiting on the maximum amount of sharpening each pixel recieves. Raise this to reduce the clamping.
#define SharpenBias 1.20                  //[0.50 to 4.00] Sharpening edge bias. Lower values for clean subtle sharpen, and higher values for a deeper textured sharpen.
#define DebugSharpen 0                    //[0 or 1] Visualize the sharpening effect. Useful for fine-tuning. Best to disable other effects, to see edge detection clearly.

//##[PIXEL VIBRANCE]
#define Vibrance 0.10                      //[-1.00 to 1.00] Overall vibrance strength. Locally adjusts the vibrance of pixels depending on their original saturation.
#define RedVibrance 1.00                  //[-8.00 to 8.00] Red channel coefficient of the vibrance strength. Adjusting the vibrance of the red channel independently.
#define GreenVibrance 1.00                //[-8.00 to 8.00] Green channel coefficient of the vibrance strength. Adjusting the vibrance of the green channel independently.
#define BlueVibrance 1.00                  //[-8.00 to 8.00] Blue channel coefficient of the vibrance strength. Adjusting the vibrance of the blue channel independently.

//##[COLOR_GRADING]
#define RedGrading 1.20                    //[0.00 to 3.00] Red colour grading coefficient. Adjust to influence the red channel coefficients of the grading, and highlight tones.
#define GreenGrading 1.10                  //[0.00 to 3.00] Green colour grading coefficient. Adjust to influence the Green channel coefficients of the grading, and highlight tones.
#define BlueGrading 1.10                  //[0.00 to 3.00] Blue colour grading coefficient. Adjust to influence the Blue channel coefficients of the grading, and highlight tones.
#define GradingStrength 0.25              //[0.00 to 1.00] The overall max strength of the colour grading effect. Raise to increase, lower to decrease the amount.
#define Correlation 1.00                  //[0.10 to 1.00] Correlation between the base colour, and the grading influence. Lower = more of the scene is graded, Higher = less of the scene is graded.

//##[COLOR TEMPERATURE]
#define White_Point 6500.0                //[2000.0 to 12000.0] Temperature value given in Kelvin. A typical CRT has a target white point temperature of D93 (9300K)

//##[CEL SHADING]
#define EdgeStrength 1.00                  //[0.00 to 4.00] Overall strength of the cel edge outline effect. Affects the overall density.  0.00: no outlines.
#define EdgeFilter 0.75                    //[0.10 to 2.00] Filters out fainter cel edges. Use it for balancing the cel edge density. EG: for faces, foliage, etc.
#define EdgeThickness 1.20                //[0.50 to 2.00] Thickness of the cel edges. Increase for thicker outlining.  Note: when downsampling, raise this to keep the same thickness.
#define UseYuvLuma 0                      //[0 or 1] Uses YUV luma calculations, or base color luma calculations. Yuv luma can produce a better shaded look.
#define ColorRounding 0                    //[0 or 1] Uses rounding methods on colors. This can emphasise shaded toon colors. Looks good in some games, and odd in others.

//##[PAINT SHADING]
#define PaintMethod 2                      //[1 or 2] The algorithm used for paint effect. 1: water painting, 2: oil painting. You may want to readjust the radius between the two.
#define PaintRadius 4                      //[2 to 8] Radius of the painted effect, increasing the radius also requires longer loops, so higher values require more performance.
#define PaintStrength 1.00                //[0.00 to 1.00] The overall interpolated strength of the paint effect. Where 1.0 equates to 100% strength.

//##[CURVE_CONTRAST]
#define CurveType 0                        //[0|1|2] Choose what to apply contrast to. 0 = Luma, 1 = Chroma, 2 = both Luma and Chroma. Default is 0 (Luma)
#define CurvesContrast 0.35                //[0.00 to 2.00] The amount of contrast you want. Controls the overall strength of the texture sharpening.

//##[GAMMA_CORRECTION]
#define Gamma 2.20                        //[1.5 to 4.0] Gamma correction. Decrease for lower gamma(darker). Increase for higher gamma(brighter). (Default: 2.2)

//##[LOTTES_CRT]
#define MaskingType 1                      //[1|2|3|4] The type of CRT shadow masking used. 1: compressed TV style, 2: Aperture-grille, 3: Stretched VGA style, 4: VGA style.
#define CRTSizeX 512.0                    //[128 to 2048] A workaround for arbitrary render target scaling. Either set it to a fixed width, or set it to screenSize.x
#define CRTSizeY 448.0                    //[128 to 2048] A workaround for arbitrary render target scaling. Either set it to a fixed height, or set it to screenSize.y
#define ScanBrightness -8.00              //[-16.0 to 1.0] The overall brightness of the scanline effect. Lower for darker, higher for brighter.
#define FilterCRTAmount -1.00              //[-4.0 to 1.0] The amount of filtering used, to replicate the TV CRT look. Lower for less, higher for more.
#define HorizontalWarp 0.00                //[0.0 to 0.1] The distortion warping effect for the horizontal (x) axis of the screen. Use small increments.
#define VerticalWarp 0.00                  //[0.0 to 0.1] The distortion warping effect for the verticle (y) axis of the screen. Use small increments.
#define MaskAmountDark 0.80                //[0.0 to 1.0] The value of the dark masking line effect used. Lower for darker lower end masking, higher for brighter.
#define MaskAmountLight 1.50              //[0.0 to 2.0] The value of the light masking line effect used. Lower for darker higher end masking, higher for brighter.
#define ResolutionScale 2.00              //[0.1 to 4.0] The scale of the image resolution. Lowering this can give off a nice retro TV look. Raising it can clear up the image.
#define MaskResolutionScale 0.80          //[0.1 to 2.0] The scale of the CRT mask resolution. Use this for balancing the scanline mask scale for difference resolution scaling.
#define UseShadowMask 1                    //[0 or 1] Enables, or disables the use of the CRT shadow mask. 0 is disabled, 1 is enabled.

//##[SCANLINES]
#define ScanlineType 0                    //[0|1|2] The type & orientation of the scanlines. 0 is x(horizontal), 1 is y(vertical), 2 is both(xy)
#define ScanlineScale 0.50                //[0.20 to 2.00] The scaling & thickness of the scanlines. Changing this can help with PCSX2 IR scaling problems.
#define ScanlineIntensity 0.18            //[0.10 to 1.00] The intensity of the scanlines. Defaults: 0.18 for ScanlineType 0|1|2, 0.50 for ScanlineType 3.
#define ScanlineBrightness 1.02            //[0.50 to 2.00] The brightness of the scanlines.  Defaults: 2.00 for ScanlineType 0|1|2, 1.50 for ScanlineType 3.

//##[VIGNETTE]
#define VignetteRatio 1.77                //[0.15 to 6.00] Sets the espect ratio of the vignette. 1.77 for 16:9, 1.60 for 16:10, 1.33 for 4:3, 1.00 for 1:1.
#define VignetteRadius 1.10                //[0.50 to 3.00] Radius of the vignette effect. Lower values for stronger radial effect from center
#define VignetteAmount 0.25                //[0.00 to 1.00] Strength of black edge occlusion. Increase for higher strength, decrease for lower.
#define VignetteSlope 12                  //[2|4|8|10|12|16] How far away from the center the vignetting will start.

//##[SUBPIXEL DITHERING]
#define DitherMethod 2                    //[1 or 2] 1: Ordered grid dithering(faster), 2: random dithering(higher quality). Hardware dithering is also enabled by default.
#define ShowMethod 0                      //[0 or 1] Shows the dithering method, based of the type of dithering selected. Useful for debugging, and confirmation of working order.

//##[DEBANDING]
#define DebandRadius 32.0                  //[0.0 to 1024.0] Sampling radius, higher values will reduce further banding but might also reduce details.
#define DebandThreshold 0.017              //[0.000 to 0.100] Threshold, higher values will reduce further banding but might also reduce details and increase noise.
#define DebandSampleCount 4                //[1 to 8] Sample count, higher values are better. But also have a higher performance cost.
#define DebandOffsetMode 3                //[1|2|3] 1 = cross (axis aligned, fast), 2 = diagonal (45 degrees, slower), 3 = box (fully random, slower).
#define DebandDithering 1                  //[0|1|2|3] Additional dithering options to smoothen the output. 0 = No dithering 1 = Ordered dithering, 2 = Random dithering, 3 = Iestyn's RGB dither (Valve).

//##[PX_BORDER]
#define BorderWidth float2(2, 2)          //[0 to 2048, 0 to 2048] (X,Y)-width of the border. Measured in pixels.
#define BorderColor float3(0, 0, 0)        //[0 to 255, 0 to 255, 0 to 255] What color the border should be. In integer RGB colors, meaning 0,0,0 is black and 255,255,255 is full white.

//[END OF USER OPTIONS]
Reply

Sponsored links

#2
Please post the contents of the emulog.txt file after the problem occurs. The file can be found in "My Documents\PCSX2\logs" for the installer version or in "PCSX2\logs" for the portable/binary version.

Please make sure to enclose your emulog in code tags like so (remove the empty space on the closing code tag!):
[code]
Pasted emulog goes here
[ /code]
CPU : I7 2600K Oc'ed @ 4.2Ghz
Mobo : Intel P67 southbridge
GPU : NVIDIA Geforce GTX 750 Ti
RAM : 6 Go
Reply
#3
(09-27-2020, 08:21 AM)jesalvein Wrote: Please post the contents of the emulog.txt file after the problem occurs. The file can be found in "My Documents\PCSX2\logs" for the installer version or in "PCSX2\logs" for the portable/binary version.

Please make sure to enclose your emulog in code tags like so (remove the empty space on the closing code tag!):
[code]
Pasted emulog goes here
[ /code]

PCSX2 1.6.0-20200506140834- compiled on May  6 2020
Savestate version: 0x9a0e0000

Host Machine Init:
Operating System =  Microsoft Windows 8.1  (build 9600), 64-bit
Physical RAM    =  6030 MB
CPU name        =  Intel® Core™ i5-3210M CPU @ 2.50GHz
Vendor/Model    =  GenuineIntel (stepping 09)
CPU speed        =  2.493 ghz (4 logical threads)
x86PType        =  Standard OEM
x86Flags        =  bfebfbff 7fbae3bf
x86EFlags        =  28100000

x86 Features Detected:
SSE2.. SSE3.. SSSE3.. SSE4.1.. SSE4.2.. AVX

Reserving memory for recompilers...

Loading plugins from D:\games\PS2\PCSX2 1.6.0\Plugins...
Bound  GS: GSdx32-SSE4.dll [GSdx 20200506140834 (MSVC 19.25 SSE4.1/AVX) 1.2.0]
Bound  PAD: LilyPad.dll [LilyPad (20200506140834) 0.12.1]
Bound SPU2: Spu2-X.dll [SPU2-X 20200506140834 2.0.0]
(GameDB) 9858 games on record (loaded in 210ms)
Bound CDVD: cdvdGigaherz.dll [cdvdGigaherz 20200506140834 0.11.0]
Bound  USB: USBnull.dll [USBnull Driver 20200506140834 0.7.0]
Bound  FW: FWnull.dll [FWnull Driver 20200506140834 0.7.0]
Bound DEV9: DEV9null.dll [DEV9null Driver 20200506140834 0.5.0]
Plugins loaded successfully.

HLE Notice: ELF does not have a path.

Initializing plugins...
Init GS
Init PAD
Init SPU2
Init CDVD
Init USB
Init FW
Init DEV9
Plugins initialized successfully.

Patches: No CRC found, using 00000000 instead.
Opening plugins...
Opening GS
Opening PAD
Opening SPU2
Current Renderer: Direct3D 11 (Hardware renderer)
Opening CDVD
isoFile open ok: D:\games\0PS2 Games\Harvest Moon - A Wonderful Life - Special Edition\Harvest Moon - A Wonderful Life - Special Edition.iso
Image type  = DVD
* CDVD Disk Open: DVD, Single layer or unknown:
* * Track 1: Data (Mode 1) (623824 sectors)
Opening USB
Opening FW
Opening DEV9
GSdx Lookup CRC:0
McdSlot 0 [File]: D:\games\PS2\PCSX2 1.6.0\memcards\Mcd001.ps2
McdSlot 1 [File]: D:\games\PS2\PCSX2 1.6.0\memcards\Mcd002.ps2
Plugins opened successfully.
EE/iR5900-32 Recompiler Reset
Bios Found: USA    v02.30(20/02/2008)  Console
BIOS rom2 module not found, skipping...
BIOS erom module not found, skipping...
# Initialize memory (rev:4.00, ctm:196Mhz, cpuclk:147Mhz detected)

PlayStation 2 ======== Hard reset boot
ROMGEN=2008-0220, IOP info (CPUID=1f, CACH_CONFIG=14000200, 2MB, IOP mode)
<20080220-175343,ROMconf,PS20230WC20080220.bin:11824>
# Total accessable memory size: 32 MB (B:2:8:0) (400:2:7c30)
# TLB spad=0 kernel=1:12 default=13:30 extended=31:38
# Initialize Start.
# Initialize GS ...
# Initialize INTC ...
# Initialize TIMER ...
# Initialize DMAC ...
# Initialize VU1 ...
# Initialize VIF1 ...
# Initialize GIF ...
# Initialize VU0 ...
# Initialize VIF0 ...
# Initialize IPU ...
# Initialize FPU ...
# Initialize User Memory ...
# Initialize Scratch Pad ...
# Initialize Done.

EE DECI2 Manager version 0.06 Sep  5 2006 12:57:08
  CPUID=2e20, BoardID=0, ROMGEN=2008-0220, 32M

Patches: No CRC found, using 00000000 instead.
(SYSTEM.CNF) Detected PS2 Disc = cdrom0:\SLUS_211.71;1
(SYSTEM.CNF) Software version = 1.02
(SYSTEM.CNF) Disc region type = NTSC
ELF (cdrom0:\SLUS_211.71;1) Game CRC = 0x304C115C, EntryPoint = 0x00100008
(SYSTEM.CNF) Detected PS2 Disc = cdrom0:\SLUS_211.71;1
(SYSTEM.CNF) Software version = 1.02
(SYSTEM.CNF) Disc region type = NTSC

IOP Realtime Kernel Ver.0.9.1
    Copyright 1999 © Sony Computer Entertainment Inc.
Reboot service module.(99/11/10)
cdvd driver module version 0.1.1 ©SCEI
Load File service.(99/11/05)
Multi Threaded Fileio module.(99/11/15)
iop heap service (99/11/03)
loadelf: fname cdrom0:¥SLUS_211.71;1 secname all
loadelf version 3.30
Input ELF format filename = cdrom0:¥SLUS_211.71;1
0 00100000 0075d580 ......................................................................................................................
Loaded, cdrom0:¥SLUS_211.71;1
start address 0x100008
gp address 00000000
# Restart Without Memory Clear.
# Initialize GS ...
# Initialize INTC ...
# Initialize TIMER ...
# Initialize DMAC ...
# Initialize VU1 ...
# Initialize VIF1 ...
# Initialize GIF ...
# Initialize VU0 ...
# Initialize VIF0 ...
# Initialize IPU ...
# Initialize FPU ...
# Initialize Scratch Pad ...
# Restart Without Memory Clear Done.
Elf entry point @ 0x00100008 about to get recompiled. Load patches first.
comment: Patch by Prafull
(GameDB) Patches Loaded: 1
(UpdateVSyncRate) Mode Changed to NTSC.
(UpdateVSyncRate) FPS Limit Changed : 59.94 fps
GSdx Lookup CRC:304C115C
Get Reboot Request From EE

PlayStation 2 ======== Update rebooting..

PlayStation 2 ======== Update reboot complete
cdvdman Init

IOP Realtime Kernel Ver. 2.2
    Copyright 1999-2002 © Sony Computer Entertainment Inc.
Reboot service module.(99/11/10)
cdvd driver module version 0.1.1 ©SCEI
Load File service.(99/11/05)
Multi Threaded Fileio module.(99/11/15)
iop heap service (99/11/03)
loadmodule: fname cdrom0:¥MODULES¥SIO2MAN.IRX;1 args 0 arg
loadmodule: id 25, ret 0
loadmodule: fname cdrom0:¥MODULES¥PADMAN.IRX;1 args 0 arg
loadmodule: id 26, ret 0
loadmodule: fname cdrom0:¥MODULES¥MCMAN.IRX;1 args 0 arg
loadmodule: id 27, ret 2
loadmodule: fname cdrom0:¥MODULES¥MCSERV.IRX;1 args 0 arg
loadmodule: id 28, ret 2
loadmodule: fname cdrom0:¥MODULES¥LIBSD.IRX;1 args 0 arg
loadmodule: id 29, ret 0
loadmodule: fname cdrom0:¥MODULES¥SDRDRV.IRX;1 args 0 arg
SDR driver version 4.0.1 © SCEI
Exit rsd_main
loadmodule: id 30, ret 0
loadmodule: fname cdrom0:¥MODULES¥MODHSYN.IRX;1 args 0 arg
loadmodule: id 31, ret 0
loadmodule: fname cdrom0:¥MODULES¥MODMIDI.IRX;1 args 0 arg
loadmodule: id 32, ret 0
loadmodule: fname cdrom0:¥MODULES¥MODSD.IRX;1 args 0 arg
MODSD driver version 0.0.1
alloc adr 140000
loadmodule: id 33, ret 0
loadmodule: fname cdrom0:¥MODULES¥CRI_ADXI.IRX;1 args 0 arg
CRI ADX Driver Ver.9.00(Sep 18 2003 10:00:25)
CRI ADX Driver : Main Thread Priority = 39
CRI ADX Driver : PSM Thread Priority  = 39
CRI ADX Driver : DTX Thread Priority  = 48
CRI ADX Driver : SPU CORE Number = 0
CRI ADX Driver : sceSdInit(SD_INIT_COLD) call.
loadmodule: id 34, ret 0
sceMcInit Succeed
DVCI: "DATA0000.AFS" found.
DVCI: "DATA0001.AFS" found.
DVCI: "DATA0002.AFS" found.
DVCI: "DATA0000.DAT" found.
DVCI: "DATA0001.DAT" found.
DVCI: "DATA0002.DAT" found.
DVCI: Total 6 files.
PS2RNA: sceSifAllocIopHeap(266304) ret=0x000bf600
PS2RNA: sceSifAllocIopHeap(2256) ret=0x00100700
PS2RNA: sceSifAllocIopHeap(16448) ret=0x00101000
CODEチャンクを発見
m_MaxPC = 5888
OPTチャンクを発見
Loading savestate from slot 0...
filename: D:\games\PS2\PCSX2 1.6.0\sstates\SLUS-21171 (304C115C).00.p2s
EE/iR5900-32 Recompiler Reset
Loading GS
Loading PAD
Loading SPU2
comment: Patch by Prafull
(GameDB) Patches Loaded: 1
Closing plugins...
Closing DEV9
Closing FW
Closing USB
Closing CDVD
Closing SPU2
Closing PAD
Closing GS
Plugins closed successfully.
Shutting down plugins...
Plugins shutdown successfully.
(GameDB) Unloading...
Reply
#4
Makes sense
[Image: HkgHT5k.gif]
もっとちゃんと言ってよ
忘れないようメモにしてよ



Reply
#5
(09-27-2020, 09:16 AM)Kojin Wrote: Makes sense
Fixed by enabling MTUV. Thank you.
Reply




Users browsing this thread: 1 Guest(s)