Hi there, Current specs are as follows:
Cpu : AMD Phenom 9550
Ram : 4gb
Graphics card : NVidia gtx 280
Direct X : DX9 newest driver
PCSX2: 0.9.6
OS : winxp 64
Config settings :
Graphics : zerog 0.97.1
Sound : spu2-x 1.1.0
Controller : Lilypad 0.9.9
cdvdrom : Linuz Iso 0.8.0
Dev9 : dev9nulldriver 0.3.0
Usb : usbnulldriver 0.5.0
firewire : fwnulldriver 0.4.0
Issue :
Ok, so I took the liberty to try replaying FFXII... Only to find out I'm having issues booting it! I'm inclined to believe that the issue is in the cdvdrom driver but I could be wrong.
Step one : Select Cdvdrom Driver, Config it so that it runs off my ISO Image of the game. (no compress or decompress fiddling)
Step two : Hit execute. Error rom2/erom not found.
Step three : Try again using Run cd/dvd. Error loading XXXXX.iso
Step four : Try with a different cd driver. (cycle through and find only linuz & gigaherz therefor choose gigaherz. Mount Iso to X: drive, run dvd/cd. Result : Screen loads, shows fps, but stays black and only responds to the escape key.
Edited :
Did some further reading, Linuz apparently isn't any good for running mounted images and i dont know about unmounted ones. Also read some people having similar problem with diff games. Some people said burning the image to a disc worked for them, So, I'll try that and post up what I get.
Edited :
Burning to DVD and playing off DVD fixed the problem.
Cpu : AMD Phenom 9550
Ram : 4gb
Graphics card : NVidia gtx 280
Direct X : DX9 newest driver
PCSX2: 0.9.6
OS : winxp 64
Config settings :
Graphics : zerog 0.97.1
Sound : spu2-x 1.1.0
Controller : Lilypad 0.9.9
cdvdrom : Linuz Iso 0.8.0
Dev9 : dev9nulldriver 0.3.0
Usb : usbnulldriver 0.5.0
firewire : fwnulldriver 0.4.0
Issue :
Ok, so I took the liberty to try replaying FFXII... Only to find out I'm having issues booting it! I'm inclined to believe that the issue is in the cdvdrom driver but I could be wrong.
Step one : Select Cdvdrom Driver, Config it so that it runs off my ISO Image of the game. (no compress or decompress fiddling)
Step two : Hit execute. Error rom2/erom not found.
Step three : Try again using Run cd/dvd. Error loading XXXXX.iso
Step four : Try with a different cd driver. (cycle through and find only linuz & gigaherz therefor choose gigaherz. Mount Iso to X: drive, run dvd/cd. Result : Screen loads, shows fps, but stays black and only responds to the escape key.
Edited :
Did some further reading, Linuz apparently isn't any good for running mounted images and i dont know about unmounted ones. Also read some people having similar problem with diff games. Some people said burning the image to a disc worked for them, So, I'll try that and post up what I get.
Edited :
Burning to DVD and playing off DVD fixed the problem.