Posts: 1.678
Threads: 28
Joined: Mar 2011
Reputation:
49
Location: India
You can install motioninjoy. Since, Lilypad detects it, you can head over to PAD1, and then click say, the Square Button (in lilypad) and then press the corresponding button on the Controller. Repeat this for all buttons. And play in pcsx2.
Posts: 21
Threads: 4
Joined: Dec 2011
Reputation:
0
Well, I already tried that but It wont work. And I can't configure the axis. With the others, even If I press nothing will happen.
And yes, I have motionjoy installed.
Posts: 221
Threads: 17
Joined: Jan 2012
Reputation:
6
Location: New York (in my dreams)
How can MotioninJoy not be working for you? Have you properly installed the MotioninJoy driver for the PS3 controller? And pressed the pink 'Enable' button?
We
Usually
Take
All
N*****
Garments
Posts: 1.377
Threads: 88
Joined: Sep 2010
Reputation:
9
Be careful when using MotionJoy. It can create BSOD's. It also has a memory leak problem a swell. Its small but its their.
I5 3570k 3.4ghz| 4GB R9 290| 8GB DDR3
Posts: 3
Threads: 0
Joined: Jul 2011
Reputation:
0
Location: Arkansas, USA
I have always had some "issues" with MotionJoy, but it is only needed for the wireless controllers. I know the wired Afterglow brand controllers are plug-n-play (they work with any game that supports gamepad input without any drivers). I'm also 99% sure that the Sony brand wired controllers work the same way. Both can be found at Walmart.
Posts: 21
Threads: 4
Joined: Dec 2011
Reputation:
0
10-02-2012, 04:31 PM
(This post was last modified: 10-02-2012, 04:39 PM by Fisher Tiger.)
So...>? What are you trying to say? I must play without the cable? I have original PlayStation3 controller which came with the console.
Posts: 1.377
Threads: 88
Joined: Sep 2010
Reputation:
9
You have to use a mini USB cable. You connect your controller to your PC with that. The driver will detect it and make it usable.
I5 3570k 3.4ghz| 4GB R9 290| 8GB DDR3