Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Problems in Fedora 32
#1
Hello, I have problems when trying to play any game, it throws an error: "GS plugin failed to open. Your computer may have insufficient resources, or incompatible hardware/drivers", the log window says "Error: GLLoader failed to get GL version" and "GS plugin failed to open!(thread:MTGS)(thread:EE Core)".

My system:

Fedora Linux, version 32
NVIDIA Optimus card
NVIDIA Corporation GK106M [GeForce GTX 765M] (rev a1)
Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
Drivers and PCSX2 installed from RPMFusion

I have attached the log.txt

Can someone help me?


Attached Files
.txt   log.txt (Size: 2,24 KB / Downloads: 44)
Reply

Sponsored links

#2
According to the minimum system specs, your GPU is a little below (~2000 vs 3000).
Your GPU: https://www.videocardbenchmark.net/gpu.p...5M&id=2537
Requirements: https://github.com/PCSX2/pcsx2#system-requirements

However, you might still be able to run some non-demanding games. Can you run other 3D-Applications/Games? Which driver did you install for your GPU?

Please paste the output from the following commands here:
Code:
sudo lshw -class display
inxi -GC
Tired of always changing your PCSX2 Configuration for different games?

Check this out: https://forums.pcsx2.net/Thread-PCSX2-MultiConfigTool
Reply
#3
(05-21-2020, 11:00 AM)XXXBold Wrote: According to the minimum system specs, your GPU is a little below (~2000 vs 3000).
Your GPU: https://www.videocardbenchmark.net/gpu.p...5M&id=2537
Requirements: https://github.com/PCSX2/pcsx2#system-requirements

However, you might still be able to run some non-demanding games. Can you run other 3D-Applications/Games? Which driver did you install for your GPU?

Please paste the output from the following commands here:
Code:
sudo lshw -class display
inxi -GC


I installed the drivers from RPMFusion with the following command: sudo dnf install akmod-nvidia

The results of the commands are:


Code:
sudo lshw -class display

*-display                 
       description: VGA compatible controller
       product: GK106M [GeForce GTX 765M]
       vendor: NVIDIA Corporation
       physical id: 0
       bus info: [email protected]:01:00.0
       version: a1
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress vga_controller bus_master cap_list rom
       configuration: driver=nvidia latency=0
       resources: irq:36 memory:d0000000-d0ffffff memory:a0000000-afffffff memory:b0000000-b1ffffff ioport:4000(size=128) memory:d1080000-d10fffff
  *-display
       description: VGA compatible controller
       product: 4th Gen Core Processor Integrated Graphics Controller
       vendor: Intel Corporation
       physical id: 2
       bus info: [email protected]:00:02.0
       version: 06
       width: 64 bits
       clock: 33MHz
       capabilities: msi pm vga_controller bus_master cap_list rom
       configuration: driver=i915 latency=0
       resources: irq:32 memory:d2000000-d23fffff memory:c0000000-cfffffff ioport:5000(size=64) memory:c0000-dffff



Code:
inxi -GC

CPU:       Topology: Quad Core model: Intel Core i7-4700MQ bits: 64 type: MT MCP L2 cache: 6144 KiB
Code:
           Speed: 997 MHz min/max: 800/3400 MHz Core speeds (MHz): 1: 998 2: 999 3: 998 4: 1001 5: 998 6: 998 7: 998 8: 998
Code:
Graphics:  Device-1: Intel 4th Gen Core Processor Integrated Graphics driver: i915 v: kernel
Code:
           Device-2: NVIDIA GK106M [GeForce GTX 765M] driver: nvidia v: 440.82
Code:
           Device-3: Microdia type: USB driver: uvcvideo
Code:
           Display: x11 server: Fedora Project X.org 1.20.8 driver: modesetting,nvidia unloaded: fbdev,nouveau,vesa
Code:
           resolution: 1: 1920x1080~60Hz 2: 1920x1080~60Hz
Code:
           OpenGL: renderer: Mesa DRI Intel HD Graphics 4600 (HSW GT2) v: 4.5 Mesa 20.0.7



Thank you for your help.
Reply
#4
I think the problem could be that your system tries to start PCSX2 using your integrated Intel graphics instead of your dedicated GPU. Can you disable your iGPU within the BIOS, to check this?

There are solutions for this, but let's verify first if that's your issue.
Tired of always changing your PCSX2 Configuration for different games?

Check this out: https://forums.pcsx2.net/Thread-PCSX2-MultiConfigTool
Reply
#5
My BIOS doesn't let me disable the integrated GPU. Anyway I always launch PCSX2 using right click "Launch using the dedicated video card", as you can see in the attached image.


Attached Files Thumbnail(s)
   
Reply
#6
Hm, okay, good that there's such an option integrated directly into the context menu.

Can you verify that your graphics card in general is working properly with other (32-bit) 3D Applications/Games using OpenGL? I'm not sure if you need to install these drivers manually for NVIDIA, using AMD myself.

What happens when you start pcsx2 from your terminal directly? Can you post a log of that output aswell? Did you try older versions of PCSX2 (1.4.0)?
Tired of always changing your PCSX2 Configuration for different games?

Check this out: https://forums.pcsx2.net/Thread-PCSX2-MultiConfigTool
Reply
#7
The package xorg-x11-drv-nvidia-libs.i686, which is for running 32 bit apps, was installed when I installed the Nvidia drivers. As for other 3D apps, I know is not the same, but I'm able to successfully emulate PS1 Games with PCSXR.

As for running from the terminal, when I do that it uses the Intel card, I don't know how to make it choose the Nvidia card from the terminal.

How can I install older versions? I installed this from RPMfusion.
Reply
#8
Try to find out how to run it with your NVIDIA do that from the terminal.

Probably you can just download the executable for 1.4.0 from https://pcsx2.net/download/releases/linux.html and start it, if you can get all the dependencies (Make sure to install the 32-bit packages!). I'm not familiar with RPMfusion, so can't help you with that.
Tired of always changing your PCSX2 Configuration for different games?

Check this out: https://forums.pcsx2.net/Thread-PCSX2-MultiConfigTool
Reply
#9
Ok, I managed to open it in the terminal with the NVIDIA driver using the command:

Code:
__NV_PRIME_RENDER_OFFLOAD=1 __GLX_VENDOR_LIBRARY_NAME=nvidia PCSX2

Guess what, with that I can successfully boot games! Maybe there's something wrong with the option of right click?

However, there's no audio. I have tried changing the settings of the audio plugin: Port audio, SDL audio, ALSA, OSS, JACK, pulse audio, nothing works.

Here's what gets printed in the terminal:

Code:
Gtk-Message: 21:45:46.052: Failed to load module "canberra-gtk-module"
Gtk-Message: 21:45:46.052: Failed to load module "pk-gtk-module"
Gtk-Message: 21:45:46.053: Failed to load module "canberra-gtk-module"
Gtk-Message: 21:45:46.053: Failed to load module "pk-gtk-module"
Interface is initializing.  Entering Pcsx2App::OnInit!
Applying operating system default language...
Loading language translation databases for 'Spanish (Modern)' [es_ES]
    pcsx2_Main not found -- translation dictionary may be incomplete.
    pcsx2_Iconized not found -- translation dictionary may be incomplete.
SetLanguage: Requested translation is not implemented yet.
Command line parsing...
Command line parsed!


I have attached the log.

Thank you for your patience all this time, and note that English is not my first language, so sorry for any mistake I may make.


Attached Files
.txt   log.txt (Size: 20 KB / Downloads: 29)
Reply
#10
I thought that option from the context menu probably won't work correct, good that we've tested from the terminal Smile

From your log there's a hint why you have no audio:

Code:
Request SDL audio driver: pulseaudio
ALSA lib dlmisc.c:283:(snd_dlobj_cache_get0) Cannot open shared library /usr/lib/alsa-lib/libasound_module_pcm_pulse.so ((null): /usr/lib/alsa-lib/libasound_module_pcm_pulse.so: cannot open shared object file: No such file or directory)
So seems it tries to load the .so from the wrong location.
- Can you check where on your system this library is present?
- Does sound work for other applications?
- Does it make a difference if you change your system's default speaker(probably not, but please try this)? (Make sure to close pcsx2 and restart after you selected another output)
- Do you have a menu for selecting the sound volume per application? If yes, does PCSX2 show up there when running?
Tired of always changing your PCSX2 Configuration for different games?

Check this out: https://forums.pcsx2.net/Thread-PCSX2-MultiConfigTool
Reply




Users browsing this thread: 1 Guest(s)