Rule of Rose control direction issue

[ramasaurio]

Hello.
I started playing Rule of Rose today on versión 1.5.0 and I noticed that Jennifer doesn't run in certain directions, she walks instead, as if I wasn't pushing the stick all the way. This doesn't happen if I use the directional buttons, she always runs if that's the case. I tried configuring the control again and using a different control (both I tried were DS4 controllers). I also tried with another game (Xenosaga Episode I) but in that game there's no problem, she runs in everydirection and walks if I only push the stick half way.
Does anybody else have a similar problema with this game or other?

[jesalvein]

I started playing Rule of Rose today on versión 1.5.0

use at least latest stable

[ramasaurio]

use at least latest stable

I used 1.6.0 now (had to configure controls again, I still don't know how to transfer config to new version ) and I have the same problem.
I will try tomorrow with 1.7.0.

[jesalvein]

both I tried were DS4 controllers

how did you connect them ? what wrapper did you use ?

[ramasaurio]

I just plugged them to the USB port and they showed as "DX Wireless Controller" in the devide diagnostic section of the plug in configuration screen.
I use them always plugged.

[jesalvein]

a ds4 controller will need a wrapper to be seen as an xinput device
use steam for this

[ramasaurio]

I don't think I understand what you mean with "use steam for this". But I downloaded DS4Windows which I used before in my previous computer, where the DS4 controller didn't work right away (in my current computer, the controller worked as soon as I plugged it in, don't know why). I remaped the controller as an XBOX controller now, thanks to DS4W, but the problem persists.
Thanks a lot for your help.

[Zangetsu21]

When using DS4Windows, go to the settings and tick "Hide DS4 Controller"

[ramasaurio]

I tried with "Hide DS4 Controller" box checked but it didn't change anything.
It's odd because in the control configuration from Windows and from the DS4W, when I move the left stick in all directions, I can see a perfect a circle in the diagram. I thougth it would be something wrong in certain directions but it seems Jennifer just doesn't like running northest or southeast

[Zangetsu21]

Which plugin are you using?

If using LilyPad, use the Quick Setup feature under Pad 1 and see if that works for you.