ScpToolkit (XInput Wrapper aka ScpServer Reloaded)
#11
So very glad I don't have to use a thread that's 471 pages to talk about my feelings and problems anymore! Especially since they're all so new and relevant with the reboot!!!! Loving what you've done with Tools! Just trying to make it work nicely now since I probably definitely was the one to cause the issues in the first place.

I cannot for the life of me make the SCP DS3 service start. I click start service and it reports the error that the dependency is missing or marked for deletion. I cant reinstall the service via elevated command prompt either. Before this happened I also had the BTH 0000000 none issue as well. Ill post my log from my last attempt. I get errors about the PnP installation and errors about starting the service.

Bluetooth IDs:
USB\VID_0A12&PID_0001&REV_0134
USB\VID_0A12&PID_0001

DS3 IDs:
USB\VID_054C&PID_0268&REV_0100
USB\VID_054C&PID_0268


Attached Files
.xml   ScpDsxInstaller.log.xml (Size: 48,03 KB / Downloads: 1.406)

Sponsored links

#12
Can you add support for this bluetooth chipset? Intel 7260 BT/WiFi AC. Seems to work fine with zadig but now its removed from newer releases. I have to keep using zadig or edit driver INI file and disable driver signature enforcement to make it work. Unless there's a reason they shouldn't be supported.

Bluetooth Hardware ID:
USB\VID_8087&PID_07DC&REV_0001
USB\VID_8087&PID_07DC
#13
(08-10-2015, 03:36 AM)AdamBritt Wrote: Reply from the previous thread

Hi Nefarius,

I just downloaded the latest from GitHub, uninstalled then deleted all the old files, then unpacked and installed the latest. But I still get BTH 00000000 None after unplugged my controller. I did look through the ScpControl.ini file and found my hardware ID in there, so is there anything else you would want me to try? Maybe I need a different adapter?

Thanks!

Did you find the exact hardware id in there or just the part with VID and PID? It's very important to check both since my new driver installer checks the "full" ID string.
#14
I couldn't get this to work with the usb on Windows 10. Had to go back to the old one.

Mind, I'm running off USB (no adapter) so that's weird.
#15
(08-10-2015, 04:24 AM)Magic815 Wrote: Nefarius - You were giving me some awesome help over in the old thread, but I still seem to have the lingering issue of my flashed bluetooth drivers getting overwritten (likely by Windows) after a few days of use. I'm on Windows 8.1, 64 bit.

Bluetooth Hardware IDs:
USB\VID_0A5C&PID_21E8&REV_0112
USB\VID_0A5C&PID_21E8

PS3 Controller Hardware IDs:
USB\VID_045E&PID_028E&REV_0114
USB\VID_045E&PID_028E
(It is also showing up as an 'Xbox 360 Controller for Windows)

I had initially talked about my issue here:
http://forums.pcsx2.net/Thread-XInput-Wr...#pid472450


Unfortunately, I already changed the settings detailed here:
http://www.tomshardware.co.uk/faq/id-216...icons.html

And the problem is still persisting. Any other ideas? My last attempt was with your v1.3.5689.40377

I added a fix for this in the latest release.

(08-10-2015, 04:27 PM)Vanquo Wrote: Can you add support for this bluetooth chipset? Intel 7260 BT/WiFi AC. Seems to work fine with zadig but now its removed from newer releases. I have to keep using zadig or edit driver INI file and disable driver signature enforcement to make it work. Unless there's a reason they shouldn't be supported.

Bluetooth Hardware ID:
USB\VID_8087&PID_07DC&REV_0001
USB\VID_8087&PID_07DC

I added support for it in the latest release.
#16
(08-10-2015, 05:36 AM)JohnLoyd1 Wrote: So very glad I don't have to use a thread that's 471 pages to talk about my feelings and problems anymore! Especially since they're all so new and relevant with the reboot!!!! Loving what you've done with Tools! Just trying to make it work nicely now since I probably definitely was the one to cause the issues in the first place.

I cannot for the life of me make the SCP DS3 service start. I click start service and it reports the error that the dependency is missing or marked for deletion. I cant reinstall the service via elevated command prompt either. Before this happened I also had the BTH 0000000 none issue as well. Ill post my log from my last attempt. I get errors about the PnP installation and errors about starting the service.

Bluetooth IDs:
USB\VID_0A12&PID_0001&REV_0134
USB\VID_0A12&PID_0001

DS3 IDs:
USB\VID_054C&PID_0268&REV_0100
USB\VID_054C&PID_0268

Do you see this in your device manager?

[Image: 10-08-_2015_21-00-24.png]
#17
(08-10-2015, 09:03 PM)Nefarius Wrote: Do you see this in your device manager?

[Image: 10-08-_2015_21-00-24.png]
No, its not there. I remember seeing the Virtual Bus being the dependency, but everytime I install the SCP Drivers it says i successfully install the virtual bus yet it never actually does i guess....?
#18
Sadly still the same issue with 10+DS4+Bluetooth


Attached Files
.xml   ScpDsxServer.log.xml (Size: 49,24 KB / Downloads: 1.003)
#19
(08-10-2015, 09:55 PM)Darkimmortal Wrote: Sadly still the same issue with 10+DS4+Bluetooth

Please also submit ScpDsxService.log.xml and ScpDsxInstaller.log.xml!
#20
(08-10-2015, 10:07 PM)Nefarius Wrote: Please also submit ScpDsxService.log.xml and ScpDsxInstaller.log.xml!


Attached Files
.xml   ScpDsxService.log.xml (Size: 231,54 KB / Downloads: 1.073)
.xml   ScpDsxInstaller.log.xml (Size: 282,82 KB / Downloads: 1.421)




Users browsing this thread: 10 Guest(s)