XInput Wrapper for DS3 and Play.com USB Dual DS2 Controller
Why not just buy a ps3 controller?

Sponsored links

Sorry for the redundant question but does the newest version still support DualShock2?
(04-01-2015, 06:51 PM)ak120691 Wrote: Sorry for the redundant question but does the newest version still support DualShock2?

Of PCSX2? It should, if PCSX2 uses XInput for controllers
Moe: [to Homer] And I'm pulling your favorite song out of the jukebox.
Homer: "It's Raining Men"?!
Moe: Yeah, not no more, it ain't. [throws the record out the window which lands into Smithers' car]
Smithers: Ow! [looks at the record] Ohhh.

what would ;e; do
Hi, so I was wondering if you could help me here.

I am trying to get the DS3 working on my laptop and have sorted it so it works via usb and am now attempting to get the bluetooth to work.
have tried the zadig blootooth.cfg thing and that hasn't got the DS3 to connect via bluetooth.

And ideas on what to do?

Any response is appreciated.
(04-03-2015, 04:10 PM)tulal Wrote: Hi, so I was wondering if you could help me here.

I am trying to get the DS3 working on my laptop and have sorted it so it works via usb and am now attempting to get the bluetooth to work.
have tried the zadig blootooth.cfg thing and that hasn't got the DS3 to connect via bluetooth.

And ideas on what to do?

Any response is appreciated.

Hi mate, i've the same problem

Use a Dell 14R and with USB, and is fine, but BT doesnt works.
Even with Zadig driver, but with zadig the monitor shows my BT MAC Adress host

I believe that the onboard dell bluetooth card does'nt pair with the controller, but I'll wait some info

tks
Hello,

I installed the SCP driver package 1.2.2.175 for my PS3 controller and it worked flawlessly via USB connection. I could not find a Bluetooth dongle v2.1 with EDR in any market near me (I did see v2.0 but I'm not sure they had EDR) so I decided to use my inbuilt Intel Bluetooth Adapter v4.0 with Zadig.exe because my internal Bluetooth adapter wasn't directly supported (USB\VID_8087&PID_07DC).

I installed the WinUSB driver for my internal bluetooth and it showed up in Device manager and SCPMonitor.exe, and when I disconnected the DS3 from USB, sometimes it paired immediately while other times it would attempt to pair and fail but pair on a second attempt when i press the PS button.

THE PROBLEM

The controller doesnt remain paired via Bluetooth, it disconnects after what i have calculated to be 30 SECONDS (not enough to even start up ANY of my games!).

Ive tried reconnecting back multiple times but it still disconnects, I have not messed with any config settings or changed the idle timeout.

While it is still connected via BT it works flawlessly, but the 30 second window is pretty ANNOYING.

I loooove SCP, but I really also need to be able to play wirelessly. Please help.

ADDITIONAL NOOB QUESTION

I just downloaded the latest update of Zadig.exe in hopes that it would include a later WinUSB driver (my initial guess was that the WinUSB driver installed was not compatible). This new version however also includes libusb-win32 (v1.2.6.0) and libusbK (v3.0.7.0) in addition to the previous WinUSB (v6.1.7600.16385).

I'm wondering which to install to ensure my DS3 via bluetooth works well. Thank You.
How can i change p2 to p1?My original USB interface is broken,Now I change to another USB interface。But the handle is by default set to P2.And Some of the game can only be controlled by P1,For example Dark Souls II Scholar of the First Sin、Dragon.Age.Inquisition、
hi! i m been using the program SpcServer for a while, but today i want to use a bluetooth (D-link DBT-122) and when i was instaling something happen and a blue screen error appears tha says that the problem was scpvbus.sys, then i try to reboot the system and when the windows is load hapend again, that happend until I desconect the control and the bluethooth, then I uninstall an reinsall the Scp and happend again, I tried whitout the bluethooth as I always used an doesn´t work I need your help please. this is the error that the program throws when i install

SCP Bluetooth Driver Installer 0.7.0.96 [02/04/2015 11:22:13 p.m.]

Detected - Microsoft Windows 7 Ultimate Service Pack 1 (6.1.7601.65536 x86)
Selected WIN7 configuration.

INFO - ENTER: DriverPackageInstallW
INFO - Looking for Model Section [SCProductions.NTx86]...
INFO - Installing INF file 'C:\Users\Jose\Desktop\juegos\ScpServer\bin\System\ScpVBus.inf' (Plug and Play).
INFO - Looking for Model Section [SCProductions.NTx86]...
INFO - Installing devices with Id "root\ScpVBus" using INF "C:\Windows\System32\DriverStore\FileRepository\scpvbus.inf_x86_neutral_21ca245c0​e23d7a5\scpvbus.inf".
INFO - Will force install because driver is not better and force flag is set.
INFO - ENTER UpdateDriverForPlugAndPlayDevices...
SUCCESS - RETURN UpdateDriverForPlugAndPlayDevices.
INFO - Installation was successful.
SUCCESS - Install completed
INFO - RETURN: DriverPackageInstallW (0x0)
INFO - ENTER: DriverPackageInstallW
INFO - Looking for Model Section [SCProductions.NTx86]...
INFO - No matching devices found in INF "C:\Users\Jose\Desktop\juegos\ScpServer\bin\System\BthWinUsb.inf" on the Machine.
INFO - RETURN: DriverPackageInstallW (0xE000020B)
INFO - ENTER: DriverPackageInstallW
INFO - Looking for Model Section [SCProductions.NTx86]...
INFO - Installing INF file 'C:\Users\Jose\Desktop\juegos\ScpServer\bin\System\Ds3WinUsb.inf' (Plug and Play).
INFO - Looking for Model Section [SCProductions.NTx86]...
INFO - Installing devices with Id "USB\VID_054C&PID_0268&REV_0100" using INF "C:\Windows\System32\DriverStore\FileRepository\ds3winusb.inf_x86_neutral_1569198​2ca5c21ae\ds3winusb.inf".
INFO - Will force install because driver is not better and force flag is set.
INFO - ENTER UpdateDriverForPlugAndPlayDevices...
SUCCESS - RETURN UpdateDriverForPlugAndPlayDevices.
INFO - Installation was successful.
INFO - Marked Phantom Device with Hardware/Compatible Id 'USB\VID_054C&PID_0268&REV_0100' for reinstall on next plug-in.
INFO - Marked Phantom Device with Hardware/Compatible Id 'USB\VID_054C&PID_0268&REV_0100' for reinstall on next plug-in.
INFO - Marked Phantom Device with Hardware/Compatible Id 'USB\VID_054C&PID_0268&REV_0100' for reinstall on next plug-in.
INFO - Marked Phantom Device with Hardware/Compatible Id 'USB\VID_054C&PID_0268&REV_0100' for reinstall on next plug-in.
INFO - Marked Phantom Device with Hardware/Compatible Id 'USB\VID_054C&PID_0268&REV_0100' for reinstall on next plug-in.
INFO - Marked Phantom Device with Hardware/Compatible Id 'USB\VID_054C&PID_0268&REV_0100' for reinstall on next plug-in.
INFO - Marked Phantom Device with Hardware/Compatible Id 'USB\VID_054C&PID_0268&REV_0100' for reinstall on next plug-in.
INFO - Marked Phantom Device with Hardware/Compatible Id 'USB\VID_054C&PID_0268&REV_0100' for reinstall on next plug-in.
INFO - Marked Phantom Device with Hardware/Compatible Id 'USB\VID_054C&PID_0268&REV_0100' for reinstall on next plug-in.
INFO - Marked Phantom Device with Hardware/Compatible Id 'USB\VID_054C&PID_0268&REV_0100' for reinstall on next plug-in.
SUCCESS - Install completed
INFO - RETURN: DriverPackageInstallW (0x0)

Install Succeeded.

-- Install Summary --
Bus Driver
DS3 USB Driver

thanks
Jose
Hi, thanks for the program, it is great.
I have been having a problem though for a couple of months now, it usually works perfect but it randomly goes crazy and it starts pressing buttons even when i am not touching the controller. It is very random but it happens mostly when you press several buttons at the same time.
Hi,

Thanks for this. It works perfect on an old belkin BT.

My problem is that it will not pick up the BT on my ASUS T100TA. The BT shows up as Hardware ID: BCMBTBUS\BLUETOOTH

I've tried many things mentioned but it doesn't show in the driver install or in Zadig. Being a tablet running Windows 8.1 x86, USB ports are few and far between so I would like to use internal BT if possible.

Any ideas or pointers as to what I can try next?

Thanks




Users browsing this thread: 7 Guest(s)