XInput Wrapper for DS3 and Play.com USB Dual DS2 Controller

[Anti-Ultimate]

Registered to say that on Windows 8.1, Update KB3047254 broke this driver entirely and deinstalling the Update made it work again

[Cereal_Killa]

I'm trying to get my PS3 controller working with Steam games.
I've plugged it in via a USB cable.

Prior to installing this software, Steam would recognise that I had a PS3 controller plugged in and mapped xbox commands to the buttons, but didn't respond when I pressed said buttons in menus or ingame.

I downloaded and extracted the software.
I tried running a few of the items but it just opened in Dreamweaver or Visual Studio.

I found ScpDriver in the bin folder and ran that one.
If I try running any of the other files in that folder it just crashes.

If I open Steam, it no longer recognises that I have a PS3 controller plugged in.
The controller still cannot navigate the menus.

Is there a more user-friendly version???

[mikezilla2]

can you use a DS3 and 4 off the same dongle at the same time ?

[RayfenWindspear]

I'm trying to get my PS3 controller working with Steam games.
I've plugged it in via a USB cable.

Prior to installing this software, Steam would recognise that I had a PS3 controller plugged in and mapped xbox commands to the buttons, but didn't respond when I pressed said buttons in menus or ingame.

I downloaded and extracted the software.
I tried running a few of the items but it just opened in Dreamweaver or Visual Studio.

I found ScpDriver in the bin folder and ran that one.
If I try running any of the other files in that folder it just crashes.

If I open Steam, it no longer recognises that I have a PS3 controller plugged in.
The controller still cannot navigate the menus.

Is there a more user-friendly version???

Most everything you need to know is in the first post. ScpServer is useful to get things up and running, but after that the background service will take care of it. ScpMonitor is used with the service to see what is going on and to switch controller numbers. And no, there is not a more friendly version.

can you use a DS3 and 4 off the same dongle at the same time ?

Pretty sure you can. There are instructions for a DS4 on the first post.

[kur1977]

Hi all!

I have a trouble.

I have a Windows 7 64 bit, DS3 controller, USB\VID_0A12&PID_0001&REV_0101 bluetooth controller (see it in supported controllers list)

Did everything as described in 1st post. (use 1.2.0.160 with the latest 1.2.2.175 update)

All ok with wired connection. But when I disconnect the DS3 from PC - I see in ScpMotinor :



the 00000000 zeros are not change as it while wired connection.
And controller does not working by bluetooth (


ScpService.log

Code:

2015-05-17 01:19:19.033 ++ C:\XInput\ScpService.exe 1.2.2.175
2015-05-17 01:19:19.053 ++ C:\XInput\ScpControl.dll 1.2.2.175
2015-05-17 01:19:19.153 ++ Microsoft Windows 7 Service Pack 1 (6.1.7601.65536 AMD64)
2015-05-17 01:19:19.153 -- Bus Open   : Offset 0
2015-05-17 01:19:19.163 -- Bus Open   : Path \\?\ROOT#SYSTEM#0001#{F679F562-3164-42CE-A4DB-E7DDBE723909}
2015-05-17 01:19:19.243 ## Mapper.Initialize() - Profiles [5] Active [Default] Mappings [0]
2015-05-17 01:19:19.283 -- Controller : UDP_Worker_Thread Starting
2015-05-17 01:19:19.283 -- Bluetooth  : L2CAP_Worker_Thread Starting [82,02]
2015-05-17 01:19:19.293 -- Bluetooth  : HCI_Worker_Thread Starting [81]
2015-05-17 01:19:19.293 << HCI_Reset [0C03]
2015-05-17 01:19:19.303 >> HCI_Disconnection_Complete_EV [05]
2015-05-17 01:19:19.303 >> HCI_Command_Complete_EV [0E] [00] [HCI_Reset]
2015-05-17 01:19:19.553 << HCI_Read_BD_ADDR [1009]
2015-05-17 01:19:19.553 >> HCI_Command_Complete_EV [0E] [00] [HCI_Reset]
2015-05-17 01:19:19.553 >> HCI_Command_Complete_EV [0E] [00] [HCI_Read_BD_ADDR]
2015-05-17 01:19:19.563 << HCI_Read_Buffer_Size [1005]
2015-05-17 01:19:19.563 >> HCI_Command_Complete_EV [0E] [00] [HCI_Read_Buffer_Size]
2015-05-17 01:19:19.563 -- 0179, 10, 000A, 0000
2015-05-17 01:19:19.563 << HCI_Read_Local_Version_Info [1001]
2015-05-17 01:19:19.573 >> HCI_Command_Complete_EV [0E] [00] [HCI_Read_Local_Version_Info]
2015-05-17 01:19:19.573 -- Master 00:1B:10:00:25:AC, HCI_Version 2.0000, LMP_Version 2.0309
2015-05-17 01:19:19.573 << HCI_Write_Scan_Enable [0C1A]
2015-05-17 01:19:19.573 >> HCI_Command_Complete_EV [0E] [00] [HCI_Write_Scan_Enable]
2015-05-17 01:19:34.635 ++ Notify [Arrival] [{E2824A09-DBAA-4407-85CA-C8E8FF5F6FFA}] [\\?\USB#VID_054C&PID_0268#5&16E02094&0&2#{E2824A09-DBAA-4407-85CA-C8E8FF5F6FFA}]
2015-05-17 01:19:34.635 -- DS3 Arrival Event
2015-05-17 01:19:34.685 -- Device Arrival [00:21:4F:7A:E4:0D]
2015-05-17 01:19:34.695 -- Bus Plugin : Serial 1
2015-05-17 01:19:34.695 ++ Plugin Port #1 for [00:21:4F:7A:E4:0D]
2015-05-17 01:19:34.715 -- USB Device : HID_Worker_Thread Starting
2015-05-17 01:19:34.736 -- Started Device Instance [USB\VID_054C&PID_0268\5&16E02094&0&2] Local [00:21:4F:7A:E4:0D] Remote [00:1B:10:00:25:AC]
2015-05-17 01:19:42.087 ++ Notify [Removal] [{E2824A09-DBAA-4407-85CA-C8E8FF5F6FFA}] [\\?\USB#VID_054C&PID_0268#5&16E02094&0&2#{E2824A09-DBAA-4407-85CA-C8E8FF5F6FFA}]
2015-05-17 01:19:42.087 -- Device Removal [00:21:4F:7A:E4:0D]
2015-05-17 01:19:42.090 -- USB Device : HID_Worker_Thread Exiting
2015-05-17 01:19:42.802 >> HCI_Connection_Request_EV [04]
2015-05-17 01:19:42.802 << HCI_Delete_Stored_Link_Key [0C12]
2015-05-17 01:19:42.812 << HCI_Remote_Name_Request [0419]
2015-05-17 01:19:42.822 >> HCI_Command_Complete_EV [0E] [00] [HCI_Delete_Stored_Link_Key]
2015-05-17 01:19:42.822 >> HCI_Command_Status_EV [0F] [00] [HCI_Remote_Name_Request]
2015-05-17 01:19:42.876 >> HCI_Remote_Name_Request_Complete_EV [07]
2015-05-17 01:19:42.876 -- Remote Name : 00:21:4F:7A:E4:0D - PLAYSTATION(R)3 Controller
2015-05-17 01:19:42.886 << HCI_Accept_Connection_Request [0409]
2015-05-17 01:19:42.886 >> HCI_Command_Status_EV [0F] [00] [HCI_Accept_Connection_Request]
2015-05-17 01:19:43.196 >> HCI_Role_Change_EV [12]
2015-05-17 01:19:43.236 >> HCI_Connection_Complete_EV [03]
2015-05-17 01:19:53.243 >> L2CAP_Connection_Request [02] PSM [11]
2015-05-17 01:19:53.253 << L2CAP_Connection_Response [03]
2015-05-17 01:19:53.253 << L2CAP_Configuration_Request [04]
2015-05-17 01:19:53.333 >> L2CAP_Configuration_Request [04]
2015-05-17 01:19:53.343 << L2CAP_Configuration_Response [05]
2015-05-17 01:19:53.393 >> L2CAP_Configuration_Response [05]
2015-05-17 01:19:53.580 >> L2CAP_Connection_Request [02] PSM [13]
2015-05-17 01:19:53.580 << L2CAP_Connection_Response [03]
2015-05-17 01:19:53.580 << L2CAP_Configuration_Request [04]
2015-05-17 01:19:53.660 >> L2CAP_Configuration_Request [04]
2015-05-17 01:19:53.660 << L2CAP_Configuration_Response [05]
2015-05-17 01:19:53.720 >> L2CAP_Configuration_Response [05]
2015-05-17 01:19:53.720 << L2CAP_Connection_Request [02] PSM [01]
2015-05-17 01:19:53.750 >> L2CAP_Connection_Response [03] [01]
2015-05-17 01:19:53.750 >> L2CAP_Connection_Response [03] [00]
2015-05-17 01:19:53.750 << L2CAP_Configuration_Request [04]
2015-05-17 01:19:53.780 >> L2CAP_Configuration_Response [05]
2015-05-17 01:19:53.790 >> L2CAP_Configuration_Request [04]
2015-05-17 01:19:53.790 << L2CAP_Configuration_Response [05]
2015-05-17 01:19:54.020 << L2CAP_Disconnection_Request [06]
2015-05-17 01:19:54.050 >> L2CAP_Disconnection_Response [07]
2015-05-17 01:19:54.050 ++ Plugin Port #1 for [00:21:4F:7A:E4:0D]

[SageX85]

can you use a DS3 and 4 off the same dongle at the same time ?

Yeah, you can without problem i have it that way

[Oichi]

1. Microsoft .NET 4.0
2. Visual C 2013 Runtime.
3. Latest DirectX Runtime.
4. Latest Xbox 360 Controller Drivers available.
5. Genuine Sony DualShock3 or DualShock4 or SixAxis Controller(s).
6. Minimum of Bluetooth 2.0 + EDR Dongle (if using Bluetooth).
7. Administrator rights on your PC.

I am Disconnected as hell right now from this. Do i HAVE to have a Dongle??

[Kindo]

Hello, hello!

So, this is a weird one. After dozens of driver cleanups and reinstalls in an attempt to figure out what was wrong, I finally realized that there at least was nothing wrong with the installation of SCP Server Drivers, but rather something odd with my wired DS3 controller.

It loses its connection as soon as it is lifted from flat, lying down position. Which means I can use it as long as I don't lift it up from the table, but the moment I do, it starts blinking (all LEDs), searching for the connection.

Google search comes up with nada, so I figured I'd ask here. My suspicion is that there might be something broken inside the controller (the gyro or what have you), and I intend to hunt down another controller soon to test that theory.

Kindo

Edit: It could also be the cable or its connector on the controller. I will have to experiment once I have found a spare controller and cable.

[redfah]

Hello people!
I really need some help around here!
Recently I have installed Windows 10 on my PC. EVERYTHING works just fine, all the correct drivers are properly installed. My Dualshock 3 controller works just fine connected via cable. However, I cannot get my USB BT Dongle to work. It is recognized on the system Device Manager as a Generic Bluetooth Radio, but whenever I open the SCP Monitor tool, I can only see the Host Address as "Disconnected".

I have a notebook with a Bluetooth card in it. So, in order not to generate conflict, I was oriented not to install the Bluetooth Driver via the SCP Driver installation.
So here is what I did:

4. Check that your normal Bluetooth devices are working correctly.
5. Open Device Manager, disable your Internal Intel BTH device.
6. Plug in your BTH dongle to USB.
7. Use Zadig to install WinUSB on to your BTH Dongle (In this step I had to download a new version of Zadig, because the one in your post was not installing the driver on my Dongle. But I managed to install it successfully, it says "WinUSB v6.1.7600.16385" as the installed driver).
8. Run ScpDriver, uncheck Bluetooth Driver, and check Force Install, click Install.
9. In Device Manager, enable your Internal Intel BTH device.
1. Run ScpMonitor.
2. Right-click on it's icon in Taskbar, select Configuration.
3. Check the Disable SSP option.
4. Click OK.

(Don`t mind the numbers, obviously they are out of order)

Here is the log of the SCP Driver Installation:

SCP Driver Installer 1.2.2.175 [5/4/2015 12:29:36 AM]

Detected - Microsoft Windows 10 Pro Insider Preview (6.2.9200.0 AMD64)
Selected DEFAULT configuration.

INFO - ENTER: DriverPackageInstallW
INFO - Looking for Model Section [SCProductions.NTamd64]...
INFO - Installing INF file 'C:\ScpServer\bin\System\ScpVBus.inf' (Plug and Play).
INFO - Looking for Model Section [SCProductions.NTamd64]...
INFO - Installing devices with Id "root\ScpVBus" using INF "C:\WINDOWS\System32\DriverStore\FileRepository\scpvbus.inf_amd64_21ca245c0e23d7a​5\scpvbus.inf".
INFO - Will force install because driver is not better and force flag is set.
INFO - ENTER UpdateDriverForPlugAndPlayDevices...
SUCCESS - RETURN UpdateDriverForPlugAndPlayDevices.
INFO - Installation was successful.
SUCCESS - Install completed
INFO - RETURN: DriverPackageInstallW (0x0)
INFO - ENTER: DriverPackageInstallW
INFO - Looking for Model Section [SCProductions.NTamd64]...
INFO - Installing INF file 'C:\ScpServer\bin\System\Ds3WinUsb.inf' (Plug and Play).
INFO - Looking for Model Section [SCProductions.NTamd64]...
INFO - Installing devices with Id "USB\VID_054C&PID_0268&REV_0100" using INF "C:\WINDOWS\System32\DriverStore\FileRepository\ds3winusb.inf_amd64_15691982ca5c2​1ae\ds3winusb.inf".
INFO - Will force install because driver is not better and force flag is set.
INFO - ENTER UpdateDriverForPlugAndPlayDevices...
SUCCESS - RETURN UpdateDriverForPlugAndPlayDevices.
INFO - Installation was successful.
SUCCESS - Install completed
INFO - RETURN: DriverPackageInstallW (0x0)

Install Succeeded.

-- Install Summary --
Bus Driver
DS3 USB Driver

So guys, I would like to resolve this problem since I am only able to use my controller with the cable.
Feel free if you need any additional information!
And thank you very much in advance!

Fabio D.

[Sundry92]

Hello guys! And respect to RayfenWindspear for helping others. I didnt find answer for my question (only things like update, restart, reconnect) so ive decided to post.

My problem is interesting one. All i want is to make my Sixaxis controller work via USB. My Sixaxis controller worked fine with MotionJoy, but I really hate that program so I decided to try this one. Ive installed and done everything in guide on new system (Win 7 x64 sp1). It shows usb ds3 device and xbox 360 controller connected in device manager. Procces "scpservice" also working. But gamepad continue to blink with 4 red lights and buttons dont work.

Then Ive connected my Dualshock 3 controller and...2nd number red light started blinking and buttons worked fine.

So any thoughts? I really need help, DS3 is so heavy to take it on long trip