Login

TheRealDealReece · (This post was last modified: 02-16-2014, 10:01 PM by TheRealDealReece.)

For some reason my Dualshock 4's do not work on my second USB port on my PC's front panel, they work on all the other ports and my DS3 works on all of the ports including the second one that I mentioned.

EDIT: Don't Worry reinstalling the DS4 drivers has fixed the issue.

GianluDeep · 02-17-2014, 01:04 AM

(02-15-2014, 04:42 AM)GianluDeep Wrote: Hello everyone, I'm new to the forum and recently I bought a ds4 controller ... but I would use it with my old ds3 to play two players in some games.
The controllers are connected both, the ds3 works well but the ds4 has problems with lag in the controls (in bluetooth and usb mode also)
I installed the update of scp, which should support the ds4 and i use a 2.1 + edr dongle for bluetooth connection.

Please Help me! Thanks a lot!

Please anyone help me?

mr.squishy · 02-17-2014, 03:33 AM

(02-09-2014, 07:21 AM)mr.squishy Wrote: Alright, created an account just for this, but anyway I have a few questions:
1: My DS3 momentarily disconnects at 100% rumble- is there a fix for this?
2: For some reason I cannot figure out how to get ScpService to work
3: Is there still support for DS2 controllers? If so PLEEAAAASEEE tell me how to install the drivers or set it up or whatever.
Many thanks.

I still need help guys

Zpirit · (This post was last modified: 02-17-2014, 08:59 PM by Zpirit.)

I just got a ps3 controller and this works nicely. I'm able to run the controller through USB but when I switch to bluetooth it doesn't work completely. It connects allright and shows up in SCPmonitor.exe but it doesn't recognize any inputs for some reason. However I can use SCPUser.exe to send vibrations to the controller and that works nicely, just not he actual controller inputs. My Dongle is on the supported list and I've tried rebooting, reinstalling, disabling SSP and whatnot. SCPmontor shows: Pad 1 : blablabla(same as USB) - BTH 000..000 None

Anyone got a solution?

ABuNeNe · 02-18-2014, 03:44 PM

Hi I've been using DS3 Tool for quite sometime now till I saw this program. I've successfully use my DS3 controller with this but would like to know if there's a way to toggle function to roll back and reinstall the driver, reason is I can use the bluetooth dongle to pair my bluetooth headphone when I'm not using my DS3 controller.

Please advise.

half_a_pony · 02-18-2014, 04:17 PM

Hello, I'm trying to connect a non-genuine controller to XInput Wrapper. It works with motioninjoy (even through bluetooth), but motioninjoy looks like sort of malware so i'm trying to avoid it.

So, USB connection works and I'm trying to set up bluetooth connection.

Installation log: http://pastebin.com/jA0dacp5

I've found a strange behavior — scppair and scpmonitor show different host addresses:

[Image: xrXra.jpg]

Bluetooth connection doesn't work: no controller appears in scpmonitor.

My USB BT dongle VID and PID:
[Image: qvwO8.jpg]

Any suggestions? Thank you!

half_a_pony · (This post was last modified: 02-18-2014, 05:22 PM by half_a_pony.)

Also, when motioninjoy drivers were installed, I was able to find PC's bluetooth adapter through my phone, it was showing up in Bluetooth found devices list. With XInput Wrapper drivers the adapter cannot be found by other device. Should it be visible?

Also, here is a log from scpserver.

1) scpserver started
2) PS button pressed on controller

shunyau · (This post was last modified: 02-18-2014, 06:31 PM by shunyau.)

This works with latest version, CLIPTEC USB Bluetooth V3.0 HS+EDR Adapter Dongle (Gold Plated)

neo0031 · (This post was last modified: 02-18-2014, 10:22 PM by neo0031.)

I've been using this Wrapper/installer for a while now and I have been preaching for people to stay away from the poison that is MIJ.

This ScarletCrush wrapper has been working great for me with no problems until recently, for which I am forever grateful.

However, I've recently encountered a problem where Windows 7 would disconnect and reconnect the controller in game whenever Rumble is activated outside a certain timeframe, and the OS would play the USB connect sound. I am not sure if this problem has been reported before.

I am using the latest update (even though problem has occurred in previous literations) with a DS3 controller via USB, on Win 7 64bit.

Maybe a reinstall is my solution, but I think I would need some pointers on how to go about doing that.

Thank you.

UPDATE: A reinstall did NOT fix the problem.

Sterne · 02-19-2014, 03:17 PM

Hello everyone. I have been using xinput wrapper for a long time now. I didnt have any problem with it for something like 2 years and now I seem to really struggle with it.
It installs just fine but it cant pair my bt dongle with ds3. In monitor it shows <error>. My dongle has this green blinking light - it just stops blinking when I install xinput wrapper drivers.
At first I thought that my bt dongle is just dead but I sent couple pictures from my phone using bluetooth. This dongle is on supported list and it was working just fine on previous windows install.
Can anyone please give me some hints? I made print screen with my current install.
http://image.bayimg.com/60913ce86d860ee4...e9585f.jpg

Login
Username:
Password:	Lost Password?
	Remember me