XInput Wrapper for DS3 and Play.com USB Dual DS2 Controller

[pcsx2un]

I have a second BT dongle for my mouse, but every time I plug it in, the SCP drivers get installed. How can I tell it install the 'Generic Bluetooth Radio' drivers instead?

Please help, I can't use my mouse!

Thanks!

[blueeagle69]

my controller sony ps3 have printed in front DUALSHOCK 3 and SIXAXIS.i tested already with ScpUser but vibration it doesn't work.DS3 Controller for Windows Properties:hardaware lds : USB\VID_054C&PID_0268&REV_0100 USB\VID_054C&PID_0268 PLS HELP ME MR.CRUSH

Well I have pretty much worked out that my Sixaxis controller does not have the rumble function.
Goes to prove I use this pad more on the PC than the PS3.

[teeedubb]

Ive been using these drivers for a while now and they work flawlessly, thanks again!

I have a question for all users of this driver and ds3 controllers - Has anyone got any ideas of mods to make it easier to remember which xbox360 button is equal to the ps3 button (eg - Green = X)? I dont use a 360 controller that often because theyre crap and it takes me a second to remeber which is which and that is the difference between life and death in some games. Ive looked at changing the buttons with replacements but its kinda expensive because I havent been able to find someone selling individual replacement buttons and I would have to buy sets (plus Im always hesitant with after market parts when the originals work so well). Another option is to paint the recess where the buttons sit or to use a sticker. I think the paint will be more resistant but mre complicated as I would need to pull aprt the controller (although I have been thinking of using a tamiya paint pen to put some dots near the corresponding buttons).

So Im curious what other people have done and if anyone has any suggestions.

---

I have a second BT dongle for my mouse, but every time I plug it in, the SCP drivers get installed. How can I tell it install the 'Generic Bluetooth Radio' drivers instead?

Please help, I can't use my mouse!

Thanks!

After the ds3 driver has been installed roll back the driver in the device settings.

[MenDude]

EDIT1: Ok so I just reinstalled and I noticed the log after install says this:
----------
Install Succeeded.

-- Install Summary --
SCP DS3 Service
Bus Device
Bus Driver
Bluetooth Driver

---------

if you compare this to the screenshot on post1 its missing the USB DS3 DRIVER. How can I install this?

Either you already have it or you can run the installation again and check Force Install.

[shartwell92]

Hi!

I'd like to thank you for this great driver pack.

Like many before me I'm having trouble getting the bluetooth to work with my AziO dongle.

The ID is:USB\VID_0CF3&PID_3002&REV_0001

I've attached the logs you often ask for.

[SageX85]

Ive been using these drivers for a while now and they work flawlessly, thanks again!

I have a question for all users of this driver and ds3 controllers - Has anyone got any ideas of mods to make it easier to remember which xbox360 button is equal to the ps3 button (eg - Green = X)? I dont use a 360 controller that often because theyre crap and it takes me a second to remeber which is which and that is the difference between life and death in some games. Ive looked at changing the buttons with replacements but its kinda expensive because I havent been able to find someone selling individual replacement buttons and I would have to buy sets (plus Im always hesitant with after market parts when the originals work so well). Another option is to paint the recess where the buttons sit or to use a sticker. I think the paint will be more resistant but mre complicated as I would need to pull aprt the controller (although I have been thinking of using a tamiya paint pen to put some dots near the corresponding buttons).

So Im curious what other people have done and if anyone has any suggestions.

---

After the ds3 driver has been installed roll back the driver in the device settings.

Personally I learned a long time ago to not look at the controller, and make a mental image of the buttons, so my mental process isnt like "Its asking me to press B, circle is supposed to be B, I'll press circle", more like a quick look at the controller an see button names and color, and since most controllers have 4 buttons in diamond shape, when the game shows a prompt to press i use that mental image and the finger responds.

something like this



The only gamepad that gives me problem is the gamecube one, and when i change from xbox to dreamcast a little time to adjust the colors.

[MenDude]

I don't really look at the controller, the button layout is pratically the same (except for the analog and d-pad).

[walle]

Hello guys, thank you for the solution, it works smoothly and no problem for the moment, except one thing for me, please help me!

Before I install the package (ScpDriver.exe) and all what comes after... My bluetooth devices appear normally in the control panel as you can see here: It's the normal state, it's taken before I install the ScpDriver.

http://i.imgur.com/sO9Bt5F.jpg


And once I install, all the Bluetooth devices dissapear (you can only see one in the picture before but there's 3 or 4) :


http://i.imgur.com/D9ATW3g.jpg



ps: I'm under a laptop, my bluetooth adapter is internal, win7 vaio i3
See? It dissapeared, okay so the bluetooth still works with my devices no problem, but it seems that the ScpDriver override them completely, how can I fix this? I'm worried, thanks.

[lightangel1]

Just lost on how to fix button sensitivity, I have read many post some seem old, so what is the current way to fix this problem using this setup

Thanks

[walle]

please help guys Post: #3259