XInput Wrapper for DS3 and Play.com USB Dual DS2 Controller
When trying to install it, I get this text on the driver program.

Detected - Microsoft Windows 81 (6.2.9200.0 AMD64)
Selected WIN81 configuration.

INFO - ENTER: DriverPackageInstallW
INFO - Looking for Model Section [SCProductions.NTamd64]...
INFO - RETURN: DriverPackageInstallW (0x103)
INFO - ENTER: DriverPackageInstallW
INFO - Looking for Model Section [SCProductions.NTamd64]...
INFO - No matching devices found in INF "C:\Program Files\Scarlet.Crush Productions\bin\System\BthWinUsb.inf" on the Machine.
INFO - RETURN: DriverPackageInstallW (0xE000020B)
INFO - ENTER: DriverPackageInstallW
INFO - Looking for Model Section [SCProductions.NTamd64]...
INFO - RETURN: DriverPackageInstallW (0x103)

Anyone who might have an idea why and what I can do to fix it?

Sponsored links

Ok first of all thank you for your hard work. Now here is my issue, DS3 works flawlessly both wired and wireless (USB\VID_0A12&PID_0001, USB\VID_0A12&PID_0001&REV_5276) but my DS4 only works wired. When I disconnect the usb cable from it, it doesn't connect through Bluetooth and if I try to turn it on by tapping or holding the PS button it does notthing.
for me the installation worked but after i reboot the bluetooth driver gives me an error and i have to reinstall the zadig driver again. i have windows 8.1. the bluetooth driver dosent seem to stick.
I need some help.

I get to this step:
8. Run ScpDriver.exe.

When I run this .exe,nothing happens at all. Any ideas anyone?

I'm attempting to use a PS3 controller plugged directly into one of my USB ports.

PC Specs:

* Intel i7 4790k
* GTX 970
* 16 GB RAM
* Windows 7 64-bit

Also, I refuse to use Motioninjoy; that program is absolute rubbish.
Need some help trying to get my bth dongle running.

I´m trying to run it on w8 but im getting the next log from ScpServer:

Quote:2015-01-09 14:06:49.230 >> HCI_Connection_Request_EV [04]
2015-01-09 14:06:49.233 << HCI_Delete_Stored_Link_Key [0C12]
2015-01-09 14:06:49.258 << HCI_Remote_Name_Request [0419]
2015-01-09 14:06:49.280 >> HCI_Command_Complete_EV [0E] [00] [HCI_Delete_Stored_Link_Key]
2015-01-09 14:06:49.288 >> HCI_Command_Status_EV [0F] [00] [HCI_Remote_Name_Request]
2015-01-09 14:06:49.312 >> HCI_Remote_Name_Request_Complete_EV [07]
2015-01-09 14:06:49.313 -- Remote Name : 00:1E:3DLaughE:72:04 - PLAYSTATION®3Conteroller-ghic
2015-01-09 14:06:49.320 << HCI_Reject_Connection_Request [040A]
2015-01-09 14:06:49.328 >> HCI_Command_Status_EV [0F] [00] [HCI_Null]
2015-01-09 14:06:49.335 >> HCI_Command_Status_EV [0F] [00] [HCI_Reject_Connection_Request]
2015-01-09 14:06:49.342 >> HCI_Connection_Complete_EV [03]

Thank you for the help Tongue
Hello all I don't have answers to your bluetooth problem but what I do have for you is an installer for SCP-DS-Driver.

The idea is to simplify the install of SCP-DS I have packaged 1.2.0.160 updated with 1.2.1.165 and 1.2.2.175 as a complete install(Sources not included they are on the OP so I found no need this is more to help out end users anyways).
scpdriver.exe is selected to run when the installer closes to create a steamline install(you still have to select options and click install). I have made it so that the installation directory is "C:\Scarlet Crush Productions\SCP-DS-Driver\" it is also not possible to change the install directory with this installer.

There is an uninstaller also just remember to run scpdriver.exe to remove the service and drivers or else the uninstaller will fail because scpserver.exe will be running(I named the uninstaller "Run scpdriver.exe before Uninstalling.exe") to help people remember to use scpdriver.exe to remove the service and driver before removing the application files.

If there become anymore updates to this Driver i'll update the installer
http://adf.ly/8750997/scp-ds-driver

I am only using adfly to gain a small amount of revenue it's actually very small when you think about it's $5 USD for every 1000 visitors per 24 hours which to me is like $3 CDN, and I highly doubt there will be 1000 visitors every 24 hours for this link
Hello everyone!

I need some help trying to re-install this onto my fully restored computer (Win8 > Win7). I am currently running Windows 7 Ultimate and whenever I tried to reinstall the XBOX 360 drivers, they don't seem to be installing properly. Is there any way to fix this? I also don't know if the default drivers for the DS3 have been installed since I have been gone from this computer for a while and my siblings attempted as well.
Hello everyone!

I apologise for possible asking already answered question, but the topic is HUGE.Rolleyes

I've got the following problem:

I'm using scp ds3 on my notebook, dell inspiron n7110 with integrated bluetooth.

When I first install the driver, everything's fine. The Host address field contains some address, the pad works by bluetooth.

Then, after reboot, the bluetooth stops working.
Dualshock still can connect via usb, but Host address field shows <error>.

So far, the only solution for this is to reintstall scp driver - it fixes bluetooth usage until the next reboot.

I tried disabling\enabling SSP, but without any success.

Is there any better fix for this problem?
(01-10-2015, 09:48 AM)vonneroxa Wrote: Hello everyone!

I need some help trying to re-install this onto my fully restored computer (Win8 > Win7). I am currently running Windows 7 Ultimate and whenever I tried to reinstall the XBOX 360 drivers, they don't seem to be installing properly. Is there any way to fix this? I also don't know if the default drivers for the DS3 have been installed since I have been gone from this computer for a while and my siblings attempted as well.
The Xbox360 Controller Driver is for emulating the Xbox360 Controller you also need the LibUsb0-Win32 Sony Playstation 3 Controller Driver for this to work

Try using this driver instead of the one that comes with sixaxis pairing tool by DacingPixelStudios, the one included in the pairing tool is a non input version of this driver and the pairing app will still work with the driver http://dl.qj.net/playstation-3/tools-and...or-pc.html
Hi guys.
I'm trying to connect both ds3 and ds4 to one bt dongle.
DS3 works ok on bt, but ds4 not connecting, need advice.
       
PS I successfully used ds3 via motionjoy and ds4 via ds4 window, but don't used them together...




Users browsing this thread: 6 Guest(s)