..:: PCSX2 Forums ::..

Hi, i created a bin file of Street Fighter EX 3 and it loads up to a certain point and gives this error and sits on a black screen.

Code:
Closing plugins...

    Closing DEV9

    Closing FW

    Closing USB

    Closing CDVD

    Closing SPU2

    Closing PAD

    Closing GS

Plugins closed successfully.

Open virtual disk tray

HLE Warning: ELF does not have a path!!

Opening plugins...

    Opening GS

    Opening PAD

    Opening SPU2

    Opening CDVD

detected blocksize = 2352

isoOpen(CD): G:\Emulators\PCSX2 0.9.7\Roms\SFEX3\SFEX3.BIN ok.

The iso has 298405 blocks (size 2352).

The iso offset is 0, and the block offset is 0.

 * CDVD Disk Open: CD, 1 tracks (1 to 1):

 * * Track 1: Data (Mode 1) (298405 sectors)

(IsoFS) Block 0x10: Primary partition info.

(IsoFS) Block 0x11: Extended partition info.

    Opening USB

    Opening FW

    Opening DEV9

McdSlot 0: C:\Users\Herbi\Documents\PCSX2\memcards\Mcd001.ps2

McdSlot 1: C:\Users\Herbi\Documents\PCSX2\memcards\Mcd002.ps2

Plugins opened successfully.

EE/iR5900-32 Recompiler Reset

Bios Version 1.60

Load Bios Warning: rom1 module not found, skipping... (this is not an error)

Load Bios Warning: rom2 module not found, skipping... (this is not an error)

Load Bios Warning: erom module not found, skipping... (this is not an error)

GIFTAG error, size exceeded VU memory size 3ff

(IsoFS) Block 0x10: Primary partition info.

(IsoFS) Block 0x11: Extended partition info.

(SYSTEM.CNF) Detected PS2 Disc = cdrom0:\SLUS_201.30;1

(SYSTEM.CNF) Software version = 1.00

(SYSTEM.CNF) Disc region type = NTSC

(IsoFS) Block 0x10: Primary partition info.

(IsoFS) Block 0x11: Extended partition info.

Initializing Elf: 5644094 bytes

ELF (cdrom0:\SLUS_201.30;1) CRC=0x72B3802A, EntryPoint=0x00100008

(IsoFS) Block 0x10: Primary partition info.

(IsoFS) Block 0x11: Extended partition info.

(SYSTEM.CNF) Detected PS2 Disc = cdrom0:\SLUS_201.30;1

(SYSTEM.CNF) Software version = 1.00

(SYSTEM.CNF) Disc region type = NTSC

DecSet Write: 53

DecSet Write: 00

(IsoFS) Block 0x10: Primary partition info.

(IsoFS) Block 0x11: Extended partition info.

(SYSTEM.CNF) Detected PS2 Disc = cdrom0:\SLUS_201.30;1

(SYSTEM.CNF) Software version = 1.00

(SYSTEM.CNF) Disc region type = NTSC

(IsoFS) Block 0x10: Primary partition info.

(IsoFS) Block 0x11: Extended partition info.

(SYSTEM.CNF) Detected PS2 Disc = cdrom0:\SLUS_201.30;1

(SYSTEM.CNF) Software version = 1.00

(SYSTEM.CNF) Disc region type = NTSC

(R5900) Re-executed ELF Entry point (ignored) [addr=0x00100008]

(EE pc:001079AC) TLB Miss, addr=0x5 [load]

(EE pc:001079B4) TLB Miss, addr=0xc [load]

(EE pc:001079BC) TLB Miss, addr=0xb [load]

Is it my bin file being incorrectly made??

Could be. Try making a new image file with ImgBurn.

i have tried that with img burn but im using the files that were directly copied from the disc.

This is what i have tryed:
- build iso from files with imgburn
- build iso from files with cdgenps2 3.0
- mount the iso to virtual drive and use gigaherzcdvd plugin
- open iso with linuz iso plugin

Any ideas??

(02-19-2011, 07:18 AM)Yaj3221 Wrote: [ -> ]- build iso from files with imgburn

What do you mean by that?
Just make an Image file of your Original Disc, either .iso or .bin/cue should work fine.

i dont have the original disc anymore only the disc files from a previous backup.
is there anyway to make an iso with those files that works?

If it's damaged already then probably not and since you don't have the original disc anymore then I'm sorry but you shouldn't expect any more help with it in this forums.

ok thanks anyway, im just going to get a friend to bring his copy over and i'll dump it to my pc.

Yaj3221

Shadow Lady

Yaj3221

Shadow Lady

Yaj3221

Shadow Lady

Yaj3221