I'm using the latest 1.0 version of PCSX2. I was playing GGXXAC+. The frame rate was staying around 60 but after rebooting the program FPS boosted up to 72. I didn't tinker with the setting except for the "shade boost". But I may have touched something else but I don't think anything would crank up the FPS like this if the frame limit is enabled.
Try pressing TAB. That's the switch for the frame limiter.
(08-20-2012, 08:07 PM)PyroBunta Wrote: [ -> ]Try pressing TAB. That's the switch for the frame limiter.
Oh come on I told you I enabled the frame limiter. That's the problem. Despite the limiter it still runs too fast.
Base Frame limit Adjust is 100% ????
Config < Emulation settings < GS
it's a setting is it set to 100% ?
(08-20-2012, 08:32 PM)abdo123 Wrote: [ -> ]Base Frame limit Adjust is 100% ????
Config < Emulation settings < GS
it's a setting is it set to 100% ?
I thought I checked that but you are right, it was set to 120%. But it's weird because when the FPS was stable the base frame rate was already set to 120%.
ok glad to help
Frame limiter = F4 (Tri State)
Turbo = Tab (Dual State)
hmm yeah but if you think about it maybe Pyro was misguided because enabling the Turbo will refresh the frame rate ( helpful with other problems )
however the 20% exact increase was more than an evidence ...
(08-20-2012, 08:07 PM)PyroBunta Wrote: [ -> ]Try pressing TAB. That's the switch for the frame limiter.
Tab - Switch between base and turbo
F4 - switch between:
1.Base and no limit
2.Turbo(if enabled)and no limit
3.Slow Motion(if enabled) and no limit
Shift+Tab - switch between base and slow motion
I'm only guessing because he said that he may press a wrong button or something. It was wierd because the base frame on default is usually 100%.