06-22-2014, 12:23 AM
Hello! I've been tackling this problem all day, but to no avail.
I've just downloaded PCSX2 and I've been trying to run Dokapon Kingdom on it. The PCSX2 program itself works fine--when I run System/Reboot CDDVD (Full), the BIOS screen loads well.
However, when I run System/Reboot CDDVD (Fast), it goes to a black screen, and the log reads:
Opening plugins...
Opening GS
Opening PAD
Intel® HD Graphics Family (8.17.12.6721)
Opening SPU2
Opening CDVD
isoFile open ok: C:\PCSX2\PCSX2 1.2.1\DOKAPONKINGDOM.ISO
Image type = DVD
* CDVD Disk Open: DVD, Single layer or unknown:
* * Track 1: Data (Mode 1) (303744 sectors)
Opening USB
Opening FW
Opening DEV9
McdSlot 0: C:\Users\Belrich\Documents\PCSX2\memcards\Mcd001.ps2
McdSlot 1: C:\Users\Belrich\Documents\PCSX2\memcards\Mcd002.ps2
Plugins opened successfully.
EE/iR5900-32 Recompiler Reset
Bios Found: USA v02.20(10/02/2006) Console
BIOS rom1 module not found, skipping...
BIOS rom2 module not found, skipping...
BIOS erom module not found, skipping...
(SYSTEM.CNF) Detected PS2 Disc = cdrom0:\SLUS_217.78;1
(SYSTEM.CNF) Software version = 1.00
(SYSTEM.CNF) Disc region type = NTSC
ELF (cdrom0:\SLUS_217.78;1) Game CRC = 0xCDE9832D, EntryPoint = 0x00100008
(SYSTEM.CNF) Detected PS2 Disc = cdrom0:\SLUS_217.78;1
(SYSTEM.CNF) Software version = 1.00
(SYSTEM.CNF) Disc region type = NTSC
Closing plugins...
Closing DEV9
Closing FW
Closing USB
Closing CDVD
Closing SPU2
Closing PAD
Closing GS
Plugins closed successfully.
The top of the emulator's window reads numbers like fps: 50-60, EE 70%-80%, GS 0%-1%, and UI 0%-1%. It also reads Status = Unknown, rather than Status = Playable. When I try Reboot CDDVD (Full), it takes me through the BIOS opening, then to the memory card/disk screen, and no further.
My specs are the following (Running from a laptop):
- GPU: Intel ® HD Graphics Family
- Processor: Intel ® Core i5 @ 2.3 GHz
- DirectX 11
- OS: Windows 7
Config (Skipping controllers):
- GSdx 5875 SSE41
- Linuz Iso CDVD 0.9.0
- Direct 3D9 (Hardware)
Under System, Automatic Gamefixes is checked, but besides that, no speedhacks or cheats are enabled. Basically, everything is in its defaults.
Earlier, I did compress the Iso for Dokapon Kingdom from Config/ Plugin/BIOS Selector / Plugins / Config for Linuz Iso. Before that, "TLB miss" errors appeared in the log.
On another note that I'm not sure is related, this also started coming up in the log:
[wx] Failed to load shared library 'C:\PCSX2\PCSX2 1.2.1\Plugins\gsdx32-avx2-r5875.dll' (error -1073741795: unknown error c000001d)
Path: C:\PCSX2\PCSX2 1.2.1\Plugins\gsdx32-avx2-r5875.dll
File is not a valid dynamic library.
Thank you very much! I hope I can get this to work soon. If anyone needs any more details for clarification, I will gladly provide them.
I've just downloaded PCSX2 and I've been trying to run Dokapon Kingdom on it. The PCSX2 program itself works fine--when I run System/Reboot CDDVD (Full), the BIOS screen loads well.
However, when I run System/Reboot CDDVD (Fast), it goes to a black screen, and the log reads:
Opening plugins...
Opening GS
Opening PAD
Intel® HD Graphics Family (8.17.12.6721)
Opening SPU2
Opening CDVD
isoFile open ok: C:\PCSX2\PCSX2 1.2.1\DOKAPONKINGDOM.ISO
Image type = DVD
* CDVD Disk Open: DVD, Single layer or unknown:
* * Track 1: Data (Mode 1) (303744 sectors)
Opening USB
Opening FW
Opening DEV9
McdSlot 0: C:\Users\Belrich\Documents\PCSX2\memcards\Mcd001.ps2
McdSlot 1: C:\Users\Belrich\Documents\PCSX2\memcards\Mcd002.ps2
Plugins opened successfully.
EE/iR5900-32 Recompiler Reset
Bios Found: USA v02.20(10/02/2006) Console
BIOS rom1 module not found, skipping...
BIOS rom2 module not found, skipping...
BIOS erom module not found, skipping...
(SYSTEM.CNF) Detected PS2 Disc = cdrom0:\SLUS_217.78;1
(SYSTEM.CNF) Software version = 1.00
(SYSTEM.CNF) Disc region type = NTSC
ELF (cdrom0:\SLUS_217.78;1) Game CRC = 0xCDE9832D, EntryPoint = 0x00100008
(SYSTEM.CNF) Detected PS2 Disc = cdrom0:\SLUS_217.78;1
(SYSTEM.CNF) Software version = 1.00
(SYSTEM.CNF) Disc region type = NTSC
Closing plugins...
Closing DEV9
Closing FW
Closing USB
Closing CDVD
Closing SPU2
Closing PAD
Closing GS
Plugins closed successfully.
The top of the emulator's window reads numbers like fps: 50-60, EE 70%-80%, GS 0%-1%, and UI 0%-1%. It also reads Status = Unknown, rather than Status = Playable. When I try Reboot CDDVD (Full), it takes me through the BIOS opening, then to the memory card/disk screen, and no further.
My specs are the following (Running from a laptop):
- GPU: Intel ® HD Graphics Family
- Processor: Intel ® Core i5 @ 2.3 GHz
- DirectX 11
- OS: Windows 7
Config (Skipping controllers):
- GSdx 5875 SSE41
- Linuz Iso CDVD 0.9.0
- Direct 3D9 (Hardware)
Under System, Automatic Gamefixes is checked, but besides that, no speedhacks or cheats are enabled. Basically, everything is in its defaults.
Earlier, I did compress the Iso for Dokapon Kingdom from Config/ Plugin/BIOS Selector / Plugins / Config for Linuz Iso. Before that, "TLB miss" errors appeared in the log.
On another note that I'm not sure is related, this also started coming up in the log:
[wx] Failed to load shared library 'C:\PCSX2\PCSX2 1.2.1\Plugins\gsdx32-avx2-r5875.dll' (error -1073741795: unknown error c000001d)
Path: C:\PCSX2\PCSX2 1.2.1\Plugins\gsdx32-avx2-r5875.dll
File is not a valid dynamic library.
Thank you very much! I hope I can get this to work soon. If anyone needs any more details for clarification, I will gladly provide them.