..:: PCSX2 Forums ::..

Full Version: Time Crisis 3 help required!
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
First, I always wanted to play Time Crisis 3 for years. It becomes one of my childhood game since I'm at very young. I been figured the settings for the game and PCSX2 for a long times but it still doesn't fix the problem.

Here my specs:
Motherboard: Asrock A320M-HDV R4.0
CPU: Ryzen 5 2600 3.4 GHZ
RAM: HyperX Fury RGB 8GB 2666Mhz x 1
GPU: PowerColor Red Dragon RX 570 4GB
Running at PCSX2 1.6.0 and OpenGL(Hardware)

The problems I had:
1.) The screen of the game is black, no sound no image just black screen when EE Cyclerate go above 0.
2.) The cinematic/cutscenes of the game is quite laggy and the sound doesn't synchronize.
3.) The game and cinematic/cutscenes also go too slow or go too fast either I disabled and enabled Framelimiter.
4.) The speed of the game and cinematic/cutscenes doesn't [font=Tahoma, Verdana, Arial, sans-serif]synchronize and laggy, the sound also messed up.Even though I set [font=Tahoma, Verdana, Arial, sans-serif]EE Cyclerate to -3 or -2 or -1 it still doesn't work or fix any problems I'm having.[/font][/font]

Please, I wanted to play the game so bad, I did all the research I searched but none of the solution will work. Really wish anyone all of you could help me, I beg anyone of you.
(And sorry for bad grammar or English)
Please post the contents of the emulog.txt file after the problem occurs. The file can be found in "My Documents\PCSX2\logs" for the installer version or in "PCSX2\logs" for the portable/binary version.

Please make sure to enclose your emulog in code tags like so (remove the empty space on the closing code tag!):
[code]
Pasted emulog goes here
[ /code]
(10-15-2020, 11:24 AM)jesalvein Wrote: [ -> ]Please post the contents of the emulog.txt file after the problem occurs. The file can be found in "My Documents\PCSX2\logs" for the installer version or in "PCSX2\logs" for the portable/binary version.

Please make sure to enclose your emulog in code tags like so (remove the empty space on the closing code tag!):
[code]
Pasted emulog goes here
[ /code]

Sorry, I don't get what you saying, can you elaborate further for how to do this? I do have the files that you needed.
(10-15-2020, 11:24 AM)jesalvein Wrote: [ -> ]Please post the contents of the emulog.txt file after the problem occurs. The file can be found in "My Documents\PCSX2\logs" for the installer version or in "PCSX2\logs" for the portable/binary version.

Please make sure to enclose your emulog in code tags like so (remove the empty space on the closing code tag!):
[code]
Pasted emulog goes here
[ /code]

PCSX2 1.6.0-20200506140834- compiled on May  6 2020
Savestate version: 0x9a0e0000

Host Machine Init:
Operating System =  Microsoft Windows 10 Home (build 18363), 64-bit
Physical RAM    =  8123 MB
CPU name        =  AMD Ryzen 5 2600 Six-Core Processor
Vendor/Model    =  AuthenticAMD (stepping 02)
CPU speed        =  3.393 ghz (12 logical threads)
x86PType        =  Standard OEM
x86Flags        =  178bfbff 7ed8320b
x86EFlags        =  2fd3fbff

x86 Features Detected:
SSE2.. SSE3.. SSSE3.. SSE4.1.. SSE4.2.. AVX.. AVX2.. FMA
SSE4a

Reserving memory for recompilers...

Loading plugins from D:\PCSX2\plugins...
Bound  GS: GSdx32-AVX2.dll [GSdx 20200506140834 (MSVC 19.25 AVX2/AVX2) 1.2.0]
Bound  PAD: LilyPad.dll [LilyPad (20200506140834) 0.12.1]
Bound SPU2: Spu2-X.dll [SPU2-X 20200506140834 2.0.0]
Bound CDVD: cdvdGigaherz.dll [cdvdGigaherz 20200506140834 0.11.0]
Bound  USB: nuvee_ps2_usb.dll [nuvee ps2 usb 0.2.0]
Bound  FW: FWnull.dll [FWnull Driver 20200506140834 0.7.0]
(GameDB) 9858 games on record (loaded in 111ms)
Bound DEV9: DEV9null.dll [DEV9null Driver 20200506140834 0.5.0]
Plugins loaded successfully.

HLE Notice: ELF does not have a path.

Initializing plugins...
Init GS
Init PAD
Init SPU2
Init CDVD
Init USB
Init FW
Init DEV9
Plugins initialized successfully.

Patches: No CRC found, using 00000000 instead.
Opening plugins...
Opening GS
Opening PAD
Opening SPU2
Current Renderer: Direct3D 11 (Hardware renderer)
* SPU2-X: Enumerating PortAudio devices:
*** Device 0: 'Primary Sound Driver' (Windows DirectSound)
*** Device 1: 'Speakers (2- Realtek® Audio)' (Windows DirectSound)
*** Device 2: '4 - VA2419 Series (AMD High Definition Audio Device)' (Windows DirectSound)
*** Device 3: 'Speakers (Steam Streaming Speakers)' (Windows DirectSound)
*** Device 4: 'Speakers (Steam Streaming Microphone)' (Windows DirectSound)
*** Device 5: '4 - VA2419 Series (AMD High Definition Audio Device)' (Windows WASAPI)
*** Device 6: 'Speakers (Steam Streaming Speakers)' (Windows WASAPI)
*** Device 7: 'Speakers (2- Realtek® Audio)' (Windows WASAPI)
*** Device 8: 'Speakers (Steam Streaming Microphone)' (Windows WASAPI)
*** Device 9: 'Speakers (Realtek HD Audio output)' (Windows WDM-KS)
*** Device 10: 'Output (@System32\drivers\bthhfenum.sys,#4;%1 Hands-Free HF Audio%0
;(HUAWEI nova 3i))' (Windows WDM-KS)
*** Device 11: 'Speakers (Steam Streaming Microphone Wave)' (Windows WDM-KS)
*** Device 12: 'Output (AMD HD Audio HDMI out #3)' (Windows WDM-KS)
*** Device 13: 'Output (@System32\drivers\bthhfenum.sys,#4;%1 Hands-Free HF Audio%0
;(Redmi))' (Windows WDM-KS)
*** Device 14: 'Speakers (Steam Streaming Speakers Wave)' (Windows WDM-KS)
*** Device 15: 'Output (@System32\drivers\bthhfenum.sys,#4;%1 Hands-Free HF Audio%0
;(King’s iPad))' (Windows WDM-KS)
GSdx Lookup CRC:0
GSdx Lookup CRC:0
Opening CDVD
isoFile open ok: C:\Users\jiany\Downloads\Time Crisis 3 (USA)\Time_Crisis_3.iso
Image type  = DVD
* CDVD Disk Open: DVD, Single layer or unknown:
* * Track 1: Data (Mode 1) (827424 sectors)
Opening USB
Opening FW
Opening DEV9
McdSlot 0 [File]: C:\Users\jiany\Documents\PCSX2\memcards\Mcd001.ps2
McdSlot 1 [File]: C:\Users\jiany\Documents\PCSX2\memcards\Mcd002.ps2
Plugins opened successfully.
EE/iR5900-32 Recompiler Reset
Bios Found: USA    v01.60(07/02/2002)  Console
BIOS rom1 module not found, skipping...
BIOS rom2 module not found, skipping...
BIOS erom module not found, skipping...
# Initialize memory (rev:3.63, ctm:196Mhz, cpuclk:147Mhz detected)

PlayStation 2 ======== Hard reset boot
ROMGEN=2002-0207, IOP info (CPUID=1f, CACH_CONFIG=0, 2MB, IOP mode)
<20020207-164243,ROMconf,PS20160AC20020207.bin:11552>
# Total accessable memory size: 32 MB (B:2:8:0) (363:2:7c30)
# TLB spad=0 kernel=1:12 default=13:30 extended=31:38
# Initialize Start.
# Initialize GS ...
# Initialize INTC ...
# Initialize TIMER ...
# Initialize DMAC ...
# Initialize VU1 ...
# Initialize VIF1 ...
# Initialize GIF ...
# Initialize VU0 ...
# Initialize VIF0 ...
# Initialize IPU ...
# Initialize FPU ...
# Initialize User Memory ...
# Initialize Scratch Pad ...
# Initialize Done.

EE DECI2 Manager version 0.06 Feb  7 2002 16:41:20
  CPUID=2e20, BoardID=0, ROMGEN=2002-0207, 32M

Patches: No CRC found, using 00000000 instead.
(SYSTEM.CNF) Detected PS2 Disc = cdrom0:\SLUS_206.45;1
(SYSTEM.CNF) Software version = 1.00
(SYSTEM.CNF) Disc region type = NTSC
found 0 symbols
ELF (cdrom0:\SLUS_206.45;1) Game CRC = 0x7290669C, EntryPoint = 0x00100008
(SYSTEM.CNF) Detected PS2 Disc = cdrom0:\SLUS_206.45;1
(SYSTEM.CNF) Software version = 1.00
(SYSTEM.CNF) Disc region type = NTSC

IOP Realtime Kernel Ver.0.9.1
    Copyright 1999 © Sony Computer Entertainment Inc.
Reboot service module.(99/11/10)
cdvd driver module version 0.1.1 ©SCEI
Load File service.(99/11/05)
Multi Threaded Fileio module.(99/11/15)
iop heap service (99/11/03)
loadelf: fname cdrom0:¥SLUS_206.45;1 secname all
loadelf version 3.30
Input ELF format filename = cdrom0:¥SLUS_206.45;1
0 00100000 0033aa00 ...................LilyPad: Warning! No controls are boun.d to a currently attached device!
Please attach a controller that has been setup for use with LilyPad or go to the Plugin settings and setup new controls.
................................
Loaded, cdrom0:¥SLUS_206.45;1
start address 0x100008
gp address 00000000
# Restart Without Memory Clear.
# Initialize GS ...
# Initialize INTC ...
# Initialize TIMER ...
# Initialize DMAC ...
# Initialize VU1 ...
# Initialize VIF1 ...
# Initialize GIF ...
# Initialize VU0 ...
# Initialize VIF0 ...
# Initialize IPU ...
# Initialize FPU ...
# Initialize Scratch Pad ...
# Restart Without Memory Clear Done.
Elf entry point @ 0x00100008 about to get recompiled. Load patches first.
GSdx Lookup CRC:7290669C
GSdx Lookup CRC:7290669C
Get Reboot Request From EE
ROM directory not found

PlayStation 2 ======== Update rebooting..

PlayStation 2 ======== Update reboot complete
cdvdman Init

IOP Realtime Kernel Ver. 2.1
    Copyright 1999-2001 © Sony Computer Entertainment Inc.
Reboot service module.(99/11/10)
cdvd driver module version 0.1.1 ©SCEI
Load File service.(99/11/05)
Multi Threaded Fileio module.(99/11/15)
iop heap service (99/11/03)
loadmodule: fname cdrom0:¥SIO2MAN.IRX;1 args 0 arg
loadmodule: id 25, ret 0
loadmodule: fname cdrom0:¥PADMAN.IRX;1 args 0 arg
loadmodule: id 26, ret 0
loadmodule: fname cdrom0:¥MTAPMAN.IRX;1 args 0 arg
loadmodule: id 27, ret 0
loadmodule: fname cdrom0:¥MCMAN.IRX;1 args 0 arg
loadmodule: id 28, ret 2
loadmodule: fname cdrom0:¥MCSERV.IRX;1 args 0 arg
loadmodule: id 29, ret 2
loadmodule: fname cdrom0:¥ILINK.IRX;1 args 0 arg
loadmodule: id 30, ret 0
loadmodule: fname cdrom0:¥ILSOCK.IRX;1 args 0 arg
loadmodule: id 31, ret 0
loadmodule: fname cdrom0:¥ILDRV.IRX;1 args 0 arg
ildrv.c Jun 21 2001 14:37:09
Error at sce1394SbEui64: -1
My NodeId = 0xffc0 (Bus=0x03ff, Offset=0x000)
loadmodule: id 32, ret 0
loadmodule: fname cdrom0:¥USBD.IRX;1 args 0 arg
threadID=177bf53
USB Driver (Version 0.17.0)
loadmodule: id 33, ret 0
loadmodule: fname cdrom0:¥USBGUN.IRX;1 args 0 arg
loadmodule: id 34, ret 0
loadmodule: fname cdrom0:¥LIBSD.IRX;1 args 0 arg
loadmodule: id 35, ret 0
loadmodule: fname cdrom0:¥SDRDRV.IRX;1 args 0 arg
SDR driver version 4.0.1 © SCEI
Exit rsd_main
loadmodule: id 36, ret 0
loadmodule: fname cdrom0:¥IOCDVD.IRX;1 args 0 arg
loadmodule: id 37, ret 0
(UpdateVSyncRate) Mode Changed to NTSC.
(UpdateVSyncRate) FPS Limit Changed : 59.94 fps
sce1394SbEui64(): failed -1
Closing plugins...
Closing DEV9
Closing FW
Closing USB
Closing CDVD
Closing SPU2
Closing PAD
Closing GS
Plugins closed successfully.
Shutting down plugins...
Plugins shutdown successfully.
(GameDB) Unloading...
Quote:isoFile open ok: C:\Users\jiany\Downloads\Time Crisis 3 (USA)\Time_Crisis_3.iso

Our forum does not tolerate any kind of warez talk / discussion / links and no support will be given as such.
Read our rules,specifically rule #1. Thread closed.