..:: PCSX2 Forums ::..

PAL-M3 ? what is this ?
Is this what is written on your DVD ? it's weird

I don't know what it is, I know there is a M5 as well

Where did you read that ?
Did you modify your version ?

Here in my pnach file

well, at least crc and serial both match.

something interesting : https://forums.pcsx2.net/Thread-Post-you...#pid578998
apparently, you should convert them to armax codes

(10-03-2022, 05:15 PM)Kurobatique Wrote: [ -> ]Here in my pnach file

@jesalvein: I don't see how Armax codes would work since they are technically encrypted and PCXS2 only works with RAW codes.

@Kurobatique: This pnach shows the codes I posted are turned off (putting // in front of code); the active code starts with a 6 which I am not familiar with (I have never seen a type 6 code for PS2 and PCSX2 may not work with that type of code). Have you tried turning that code off and then enabling just one of the codes I posted? (just enable for character you are using Snake or Raiden *not both* since both codes write to the same offset).

EDIT: It seems type 6 codes are what you get if you decrypt ARMAX codes to RAW. I still have my doubts that PCSX2 will be able to use them.
  
Try these codes for M9 from Codetwink instead of the one you're using and see what happens. Only use 1 at a time.
2018F6D4 015603E7- Snake Infinite M9
92018F6D4 02A603E7- Raiden Infinite M9

Your pnach:

//Infinite M9
patch=1,EE,6018F6D4,extended,00000000
patch=1,EE,000000AB,extended,000003E7

//Snake has Stealth
//patch=1,EE,2018F6D4,extended,01F40001

//Raiden Have Stealth
//patch=1,EE,2AE7340B,extended,03440001

(10-03-2022, 06:29 PM)jesalvein Wrote: [ -> ]well, at least crc and serial both match.

something interesting : https://forums.pcsx2.net/Thread-Post-you...#pid578998
apparently, you should convert them to armax codes

  I tried but it still doesn't working

follow what rebel said above, then

(10-03-2022, 08:01 PM)Rebel521 Wrote: [ -> ]@jesalvein: I don't see how Armax codes would work since they are technically encrypted and PCXS2 only works with RAW codes.

@Kurobatique: This pnach shows the codes I posted are turned off (putting // in front of code); the active code starts with a 6 which I am not familiar with (I have never seen a type 6 code for PS2 and PCSX2 may not work with that type of code). Have you tried turning that code off and then enabling just one of the codes I posted? (just enable for character you are using Snake or Raiden *not both* since both codes write to the same offset).

EDIT: It seems type 6 codes are what you get if you decrypt ARMAX codes to RAW. I still have my doubts that PCSX2 will be able to use them.
  
Try these codes for M9 from Codetwink instead of the one you're using and see what happens. Only use 1 at a time.
2018F6D4 015603E7- Snake Infinite M9
92018F6D4 02A603E7- Raiden Infinite M9

Your pnach:

//Infinite M9
patch=1,EE,6018F6D4,extended,00000000
patch=1,EE,000000AB,extended,000003E7

//Snake has Stealth
//patch=1,EE,2018F6D4,extended,01F40001

//Raiden Have Stealth
//patch=1,EE,2AE7340B,extended,03440001

I tried using only Snake infinite M9 but at some point of the game it crashed :/

Does anyone else have an idea?