03-14-2016, 02:36 PM
03-14-2016, 02:46 PM
try putting the VU clamping to full or fiddling with the rounding modes, if that doesn't help, put it back to default and try the "VU XGKick Hack" under the gamefixes.
no change but thx anyways
no change but thx anyways
03-14-2016, 03:16 PM
What about using Super VU's? or the clamping and rounding on the EE side?
03-14-2016, 03:54 PM
tryed all no change
03-14-2016, 06:46 PM
Hum, was the GS dump taken from the HW or the SW renderer?
03-14-2016, 08:16 PM
(03-14-2016, 06:46 PM)gregory Wrote: [ -> ]Hum, was the GS dump taken from the HW or the SW renderer?
It was from HW cause in Softwaremode is no error just bad quality and slow 30-40 FPS
But if u want one from the SW Renderer i can give u some.
03-15-2016, 10:42 AM
Yes goes to a screen that you know is bad in HW mode. And do a gs dump from the SW renderer. If the replay is correct, it is likely a depth access from the EE (such as nocturne game).
03-15-2016, 05:26 PM
(03-15-2016, 10:42 AM)gregory Wrote: [ -> ]Yes goes to a screen that you know is bad in HW mode. And do a gs dump from the SW renderer. If the replay is correct, it is likely a depth access from the EE (such as nocturne game).
Heres the dump: http://www.file-upload.net/download-1139...w.rar.html
03-15-2016, 09:51 PM
The strip are due to texture color shuffling. It is supporting on openGL.
There are bug on the side of the framebuffer in upscaled resolution
And even if native got a buffer big enough, I suspect the draw is done in a separate buffer (because the standard RT is overflowed).
There are bug on the side of the framebuffer in upscaled resolution
Code:
Type:Error ID:7984 Severity:Mid Message:ERROR: RT height is too small only 1024 but require 2048
Type:Error ID:7987 Severity:Mid Message:ERROR: RT height is too small only 1024 but require 2042
And even if native got a buffer big enough, I suspect the draw is done in a separate buffer (because the standard RT is overflowed).
03-15-2016, 10:48 PM
And the remaining issue is related to width of the buffer.
So you draw a texture of 512x256 and it become a 256x512 texture. So I confirm it isn't supported.
Code:
FRAME
FBP (*32):0x8c0
FBW:8
Code:
TEX0
TBP0:0x8c0
TBW:4
PSM:0x0