Help: vtlb miss : addr 0x4, mode 0 Error.
#21
Ah. I see other people in the distant past have had this problem. I do not, however, see any point to clogging up the forum with duplicate threads. I apologize in advance if my netiquette is not quite collinear with yours, but I have always been instructed that it is less offensive to revive a dead thread than to create a duplicate.

Thus, here I am.

</intro>

I too receive the error message
vtlb miss : addr 0x4, mode 0

Given that I was not using the same version of pcsx2, nor the same plugin set. It would be unwise for me to simply assume that I would have the same resolution... if indeed there HAS been one. Given that there are no posts indicating "thanks, that did it!", it doesn't appear there has been one. I hope I will be a little more cooperative toward resolving this for future users.

<File-Run CD/DVD>

PCSX2 0.9.6 - compiled on Feb 27 2009
Savestate version 8b400004
x86Init:
CPU vendor name = GenuineIntel
FamilyID = 6
x86Family = Pentium® Dual-Core GPU E2210 @ 2.20GHz
CPU speed = 2.201 Ghz
Cores = 2 physical [2 logical]
x86PType = Standard OEM
x86EFlags = bfebfbff 0000e39d

Features:
Detected MMX
Detected SSE
Detected SSE2
Detected SSE3
Detected SSSE3
Not Detected SSE4.1

Hotkeys:
F1 - save state
(Shift +) F2 - cycle states
F3 - load state
Resetting...
Ready
Bios Version 1.60



**************
rom2 NOT FOUND
**************






**************
rom2 NOT FOUND
**************



Framelimiter rate updated (UpdateVSyncRate): 59.94 fps
* CDVD: Opening drive '\\.\E:'...
* CDVD: IO thread started...
* CDVD Disk Open: 1 tracks (1 to 1):
* * Track 1: Data (Mode 2) (2274624 sectors)
* CDVD: Disk Type: PS2 DVD
MTGS > Thread Started, Opening GS Plugin...
MTGS > GSopen Finished, return code: 0x0
No accelerated IMDCT transform found
* PCSX2 *: ExecuteBios
# Initialize Memory (rev:3.63, ctm:393Mhz, cpuc1k:295Mhz detected)
# Total accessable memory size: 32 MB (B:2:9:0) (363:2:7c30)
# TLB spad=0 kernel=1:12 default=13:30 extended=31:38
# Initialize Start.
# Initialize GS ...
# Initialize INTC ...
# Initialize TIMER ...
# Initialize DMAC ...
# Initialize VU1 ...
# Initialize VIF1 ...
# Initialize GIF ...
# Initialize VU0 ...
# Initialize VIF0 ...
# Initialize IPU ...
# Initialize FPU ...
# Initialize User Memory ...
# Initialize Scratch Pad ...
# Initialize Done.

EE DECI2 Manager version 0.06 Feb 7 2002 16:41:20
CPUID=2e20, BoardID=0, ROMGEN=2002-0207, 32M

# Restart Without Memory Clear.
# Initialize GS ...
# Initialize INTC ...
# Initialize TIMER ...
# Initialize DMAC ...
# Initialize VU1 ...
# Initialize VIF1 ...
# Initialize GIF ...
# Initialize VU0 ...
# Initialize VIF0 ...
# Initialize IPU ...
# Initialize FPU ...
# Initialize Scratch Pad ...
# Restart Without Memory Clear Done.
* PCSX2 *: ExecuteBios Complete
loadElfFile: cdrom0:\SLUS_204.88;1
loadElfFile: 750512
loadElfFile: cdrom0:\SLUS_204.88;1; CRC = 23A97857

vtlb miss : addr 0x4 mode 0

<crash>

Here is the report windows generates upon the crash:
Problem Event Name: APPCRASH
Application Name: pcsx2 0.9.6.exe
Application Version: 0.0.0.0
Application Timestamp: 49a77286
Fault Module Name: pcsx2 0.9.6.exe
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 49a77286
Exception Code: 80000003
Exception Offset: 0000f1e2
OS Version: 6.0.6001.2.1.0.768.3
Locale ID: 1033
Additional Information 1: a292
Additional Information 2: 97846ce78db5d8f7d86408c3bccd60d9
Additional Information 3: 106b
Additional Information 4: aec31d84a8e1f057d00dd461d3d92c2f

That's basically all I've got.
Reply

Sponsored links

#22
What game? What settings? Tried the latest beta as suggested before in the thread?
Core i5 3570k -- Geforce GTX 670  --  Windows 7 x64
Reply
#23
Thank you for your quick reply

Star Ocean: Till the End of Time.

Which settings are you looking for?
I will try to itemize a list for you.
The following list of settings is from the LATEST BETA as suggested.

-------------------------------------------------------------
----Graphics plugin: GSdx (MSVC 15.00, SSE2) 0.1.15----
Resolution: 800x600 60Hz (set TO this, figured it would be safe. Do not recall what it was before)
Renderer: Direct3D9 (Hardware) (unchanged)
Interlacing: None (unchaged)
Aspect Ratio: 4:3 (unchanged)
D3D internal res: 1024 1024 [ ] Native (unchanged)
SW rend. threads: 1 (unalterable)
[x] Texture filtering (unalterable)
[x] Logarithmic Z (unchanged)
[x] Allow 8-bit textures (unchanged)
[x] Alpha correction (FBA) (unchanged)
[ ] Wait VSync (unchanged)
[x] Windowed (unchanged)
[ ] Edge anti-aliasing (AA1, sw-mode only) (unalterable)
[ ] Enable output merger blur effect (unchanged)

---First Controller: LilyPad svn (r1853) 0.10.0---
Keyboard API
(o) DirectInput
Game Device APIs
[x] DirectInput
[X] XInput
[ ] DualShock 3 native mode
[x] Monitor when in background
Mouse API
(o) Disable
[x] Start without mouse focus
[ ] Always hide cursor
Advanced
[ ] Allow binding multiple PS2 controls to one PC control
Pads
[ ] Port 1 Multitap
[ ] Port 2 Multitap
Pad 1 | DualShock 2 | 23 Bindings | [x] Use analog mode whenever possible
Pad 2 | Unplugged (Kinda) | 0 Bindings | [ ] Use analog mode whenever possible

Device Diagnostics
DX Keyboard
DX Logitech Extreme 3D
DX Logitech RumblePad 2 USB
DX USB-compliant keyboard
DX USB-compliant keyboard
DX PTZ-431W
DX PPJoy Virtual joystick
DX Virtual Keyboard Driver

Miscellaneous
[x] Use GS thread
[x] Local volume control
[x] Disable screensaver
[ ] Enable Logging

Hacks
[ ] Send escape on window close
[x] Save state # in title
[ ] Exit emulator on window close
[ ] Guitar Hero 2 Hack
[x] Safe fullscreen exit on escape

---Cdvdrom Gigaherz's CDVD Plugin 0.7.0---
Source Drive...
E:

---Usb USBnull Driver 0.6.0---
[ ] Enable logging(for develop use only)

---Sound SPU2-X 1.2.0---
Mixing Settings
Interpolation: 1 - Linear (recommended)
[ ] Disable Effects Processing

Output Settings
Module: 1 - XAudio 2 (Recommended)
(the Configure... button doesn't seem to do anything)
Latency: 160 ms
[ ] Disable Time-stretching
[ ] Enable Audio Expansion
[ ] Use a Winamp DSP plugin

(unlabeled)
[ ] Enable Debug Options

---Dev9: DEV9null Driver 0.4.0---
Nothing to Configure

---FireWire: FWnull Driver 0.5.0---
[ ] Enable Logging (for develop use only)

---Bios: USA v01.60(07/02/2002) Console---

SETTINGS LIST COMPLETE
-------------------------------------------------------------

This is a list from the latest beta. The startup attempt screen is slightly different.
VERSION OF PCSX2 is beta.r1888 - Sep 20 2009 (VC9)


This time, the error code at the end is:
(EE) T1b Miss, addr=0x4 [load]
(EE) PC: 0x00143670 Cycle: 0x185fd653
Reply
#24
Did you even bother searching? This has been asked a million times
http://forums.pcsx2.net/Thread-Problems-...games-help
http://forums.pcsx2.net/Thread-Crashing-...TTEOT-NTSC
http://forums.pcsx2.net/Thread-PCSX2-Cra...er-execute
http://forums.pcsx2.net/Thread-HELP-Cras...se-Problem
[Image: newsig.jpg]
Reply




Users browsing this thread: 1 Guest(s)