XInput Wrapper for DS3 and Play.com USB Dual DS2 Controller

[Jacky]

i did that.. and my controller still wont work..

[Fox]

i did that.. and my controller still wont work..

Does your controller used to be working alright before (I mean on PS3 console or prior to SCP drivers)? If it has never been, then it must be broken.

[ToreDL87]

Hi Scarlet.

Thanks for another quick answer.

Heres what happens when I try what you said:

When I launch PCSX2 and check plugins list, there is no Pokopom r124 there.

I uninstalled PCSX2 again, and then installed Pokopom r124 and xinput 1_3 dll, Pokopom still does not show up in plugins list.
Even with 32bit xinput1_3 dll I still get the same problem.

I also double checked that it is the correct PCSX2 plugins folder, which it is (C:\ProgramFiles(x86)\PCSX2 1.0.0\Plugins) and thats exactly where I installed the Pokopom r124 plugin.

Another problem is that now, not even the SCP Lilypad shows up in plugins list anymore when I install that..
So I even tried deleting the normal lilypad and the Pokopom r124, SCP Lilypad STILL is not showing up in plugins list

What can I possibly have done wrong here?
win32 xinput1_3 dll in pcsx2 folder, check
pokopom r124.dll in pcsx2/plugins folder, check
delete SCP Lilypad, check
CP-DS3-Driver-Package-1.0.0.103 ScpServer folder in Programfiles/Scarlet.Crush Productions, check

64bit ScpUser still does not work, ScpService still does not work.

I tried uninstalling PCSX2 and SCP Xinput drivers, then deleted all folders related to them.
Then I reinstalled everything (PCSX2 first, SCP drivers second) but I still get the same problem.

Pokopom r106 is the only one that does work, but the issue I previously explained persists (I hold a button halfway in, it goes up gradually ALL the way instead of stopping halfway)

This is killing me hehe

[loinbread]

My controller works fine when connected via USB but whenever I try to connect over Bluetooth it fails with these lines in the log:

10/06/2013 2:18:55 PM.218 >> HCI_Connection_Request_EV [04]
10/06/2013 2:18:55 PM.223 << HCI_Remote_Name_Request [0419]
10/06/2013 2:18:55 PM.225 >> HCI_Command_Status_EV [0F] [00]
10/06/2013 2:18:55 PM.286 >> HCI_Remote_Name_Request_Complete_EV [07]
10/06/2013 2:18:55 PM.287 -- Remote Name : 60:38:0E:3D:1C:37 - PLAYSTATION®3 Controller
10/06/2013 2:18:55 PM.291 << HCI_Accept_Connection_Request [0409]
10/06/2013 2:18:55 PM.293 >> HCI_Command_Status_EV [0F] [00]
10/06/2013 2:18:55 PM.539 >> HCI_Role_Change_EV [12]
10/06/2013 2:18:55 PM.559 >> HCI_Connection_Complete_EV [03]
10/06/2013 2:18:55 PM.581 >> L2CAP_Connection_Request [02] PSM [11]
10/06/2013 2:18:55 PM.588 << L2CAP_Connection_Response [03]
10/06/2013 2:18:55 PM.591 << L2CAP_Configuration_Request [04]
10/06/2013 2:18:55 PM.831 >> L2CAP_Configuration_Request [04]
10/06/2013 2:18:55 PM.835 << L2CAP_Configuration_Response [05]
10/06/2013 2:18:55 PM.990 >> L2CAP_Configuration_Response [05]
10/06/2013 2:18:56 PM.560 >> L2CAP_Connection_Request [02] PSM [13]
10/06/2013 2:18:56 PM.563 << L2CAP_Connection_Response [03]
10/06/2013 2:18:56 PM.565 << L2CAP_Configuration_Request [04]
10/06/2013 2:18:56 PM.776 >> L2CAP_Configuration_Request [04]
10/06/2013 2:18:56 PM.780 << L2CAP_Configuration_Response [05]
10/06/2013 2:18:56 PM.910 >> L2CAP_Configuration_Response [05]
10/06/2013 2:18:56 PM.913 << L2CAP_Connection_Request [02] PSM [01]
10/06/2013 2:18:56 PM.926 >> L2CAP_Connection_Response [03] [01]
10/06/2013 2:18:56 PM.940 >> L2CAP_Connection_Response [03] [00]
10/06/2013 2:18:56 PM.941 << L2CAP_Configuration_Request [04]
10/06/2013 2:18:56 PM.959 >> L2CAP_Configuration_Response [05]
10/06/2013 2:18:56 PM.964 >> L2CAP_Configuration_Request [04]
10/06/2013 2:18:56 PM.965 << L2CAP_Configuration_Response [05]
10/06/2013 2:18:57 PM.158 << L2CAP_Disconnection_Request [06]
10/06/2013 2:18:57 PM.175 >> L2CAP_Disconnection_Response [07]

It always ends with the "L2CAP_Disconnection" lines. Any thoughts?

[Jacky]

Does your controller used to be working alright before (I mean on PS3 console or prior to SCP drivers)? If it has never been, then it must be broken.

it was working fine before..but Bluetooth pairing messed my controller's buttons

[ToreDL87]

it was working fine before..but Bluetooth pairing messed my controller's buttons

Then my advice would be uninstall the SCP and Bluetooth driver, reinstall and use USB only!

[Jacky]

Then my advice would be uninstall the SCP and Bluetooth driver, reinstall and use USB only!

well i dont know how.. >.>
would be useful if put some screen shots

[ToreDL87]

well i dont know how.. >.>
would be useful if put some screen shots

Open the same program you used to install it, and click uninstall

Then Install again, WITHOUT Bluetooth drivers

[ToreDL87]

This IS weird, the SCP 5350 Lilypad makes my PCSX2 stop working at near random or BSOD`s my computer when PCSX2 is running, but the drivers works perfectly.

In short, with everything perfectly installed,
R5350 SCP Lilypad which gives 0-255 like a button (No middle thing) in ELF, fiddling with sensivity yields no results in ELF and it still does 0-255 like a normal button on/off.

The r106 Pokopom (Which is the only Pokopom that works for me) gives incremental feedback in the ELF I.e from 0 all the way up to 255, releasing a little physical pressure on the button yields no result.
Now..
KrossX, in Page 8 of his thread in replying to another "lost soul", says these symptoms, when the Pokopom does incremental pressure, like it does in my case, its using false pressure because it fails to detect the Xinput extension?

Btw, hopefully none of this comes across as insulting, I believe in this so much that I really do wanna get it working
Thx again to you Scarlet for taking your time and trying your best to set us up here

And the solution there, was that the guy forgot to install Xinput1_3.dll into his PCSX2 folder, right next to the PCSX2 exe.

BUT, I have done this, and tried it with every other Xinput1_3.dll file available out there (One that was available in some other zip file, cant remember which one, but I tried it), without solving the problem..
32 bit/64 bit Xinput makes absolutely no difference, neither works..
In fact, when I delete xinput1_3.dll from PCSX2 folder it makes no difference on the problem, so its definitely related to xinput because Native Mode is not selectable in Lilypad config no matter what Xinput file I use or with SCP DS3 Monitor running or not..



I tried fresh install on my laptop too (Which has never had a emulator on it) and I get exactly the same problems there as well.
When downloading pokopom r124 from the only available site it says that it might be corrupt, and seeing as it works on neither laptop nor desktop, I`d say thats a problem!

[Jacky]

Open the same program you used to install it, and click uninstall

Then Install again, WITHOUT Bluetooth drivers

ah.. still the same.. >.<