XInput Wrapper for DS3 and Play.com USB Dual DS2 Controller

[EKlvin]

i noticed the Scpservice uses some CPU (like 1%) when the PC is just idle or browsing the web. The PS3 controller is not used at all when this occurs. Why? Is this a bug?

[ElMariachi]

@CarloxTheBoy: your Dongle - USB\VID_0A12&PID_0001&REV_0100, is not Bluetooth 2.0+EDR capable.

Hello, Scarlet!

I'm glad I found your driver, as MJ was just giving me instant crashes.
Well, I think I have proven the assumption for VID_0A12&PID_0001 not being capable wrong.

I recently bought one these:
http://www.amazon.de/gp/product/B001NW74...ge_o02_s00

As you can see on Amazon, this adapter are 2.1+EDR capable, and it's also written on the box and the datasheet.

And:
It is working with your driver!

I got to admit, that I had the "BTH 00000000 none" problem for some time, too, but this just was because I hadn't installed the Visual C 2013 Runtime before. After installing this, my DS3 is working nicely through bluetooth and this dongle, using your driver.
(Runtime: https://www.microsoft.com/de-de/download...x?id=40784)

So I think that maybe most of the BTH 00000000 reports are just because people didn't install VC2013? I didn't install it at first, because I wasn't sure if I didn't already have it installed, because there are so many tools out there that demand on having different popular runtimes installed. And then I'm used to programs yelling at me for not having the Visual C runtime installed, but your monitor and server just ran fine, the only problem being this "BTH 00000000 none" thing. It probably would be a good idea, adding a check for the Visual C runtime installation to your tools.

The complete string of the working controller is:
USB\VID_0A12&PID_0001&REV_5276
Maybe the revision is important..

I just got to add that I got one minor problem.
I wonder about your solution in putting both Triggers (L2 + R2) ond the z-axis, but one increasing and the other decreasing form the mid value. If I press both at once, the slider in windows' game controlers setting just stays at mid. I find assigning key and buttons to this setup hard. Wouldn't it be better putting both to independent axes? Or is this the normal xbox-360-controller style?

Thank you!

[Ahmed ALKAABI]

Trying to connect ps3 controller to pc via bluetooth. one of them connects. the other are not connecting

2015-05-07 01:48:01.286 ++ C:\Program Files\Scarlet.Crush Productions\ScpServer\bin\ScpService.exe 1.2.0.160
2015-05-07 01:48:01.286 ++ C:\Program Files\Scarlet.Crush Productions\ScpServer\bin\ScpControl.dll 1.2.0.160
2015-05-07 01:48:01.333 ++ Microsoft Windows 7 Ultimate Service Pack 1 (6.1.7601.65536 AMD64)
2015-05-07 01:48:01.333 -- Bus Open : Offset 0
2015-05-07 01:48:01.348 -- Bus Open : Path \\?\ROOT#SYSTEM#0001#{F679F562-3164-42CE-A4DB-E7DDBE723909}
2015-05-07 01:48:01.380 ## Mapper.Initialize() - Profiles [5] Active [Default] Mappings [0]
2015-05-07 01:48:01.395 -- Bus Plugin : Serial 1
2015-05-07 01:48:01.395 ++ Plugin Port #1 for [00:26:5C:03:C7:B3]
2015-05-07 01:48:01.395 -- USB Device : HID_Worker_Thread Starting
2015-05-07 01:48:01.395 -- Started Device Instance [USB\VID_054C&PID_0268\6&1A6EA7EB&0&2] Local [00:26:5C:03:C7:B3] Remote [00:1A:7D:DA:71:0C]
2015-05-07 01:48:01.426 -- Controller : UDP_Worker_Thread Starting
2015-05-07 01:48:01.426 -- Bluetooth : L2CAP_Worker_Thread Starting [82,02]
2015-05-07 01:48:01.426 -- Bluetooth : HCI_Worker_Thread Starting [81]
2015-05-07 01:48:01.426 << HCI_Reset [0C03]
2015-05-07 01:48:01.536 >> HCI_Command_Complete_EV [0E] [00] [HCI_Reset]
2015-05-07 01:48:01.801 << HCI_Read_BD_ADDR [1009]
2015-05-07 01:48:01.801 >> HCI_Command_Complete_EV [0E] [00] [HCI_Read_BD_ADDR]
2015-05-07 01:48:01.801 << HCI_Read_Buffer_Size [1005]
2015-05-07 01:48:01.801 >> HCI_Command_Complete_EV [0E] [00] [HCI_Read_Buffer_Size]
2015-05-07 01:48:01.801 -- 0136, 40, 000A, 0008
2015-05-07 01:48:01.801 << HCI_Read_Local_Version_Info [1001]
2015-05-07 01:48:01.801 >> HCI_Command_Complete_EV [0E] [00] [HCI_Read_Local_Version_Info]
2015-05-07 01:48:01.801 -- Master 00:1A:7D:DA:71:0C, HCI_Version 6.22BB, LMP_Version 6.22BB
2015-05-07 01:48:01.801 << HCI_Write_Scan_Enable [0C1A]
2015-05-07 01:48:01.801 >> HCI_Command_Complete_EV [0E] [00] [HCI_Write_Scan_Enable]
2015-05-07 01:48:12.081 >> HCI_Connection_Request_EV [04]
2015-05-07 01:48:12.097 << HCI_Delete_Stored_Link_Key [0C12]
2015-05-07 01:48:12.097 << HCI_Remote_Name_Request [0419]
2015-05-07 01:48:12.097 >> HCI_Command_Complete_EV [0E] [00] [HCI_Delete_Stored_Link_Key]
2015-05-07 01:48:12.097 >> HCI_Command_Status_EV [0F] [00] [HCI_Remote_Name_Request]
2015-05-07 01:48:12.128 >> HCI_Remote_Name_Request_Complete_EV [07]
2015-05-07 01:48:12.128 -- Remote Name : 00:26:5C:03:C7:B3 - PLAYSTATION®3 Controller
2015-05-07 01:48:12.128 << HCI_Accept_Connection_Request [0409]
2015-05-07 01:48:12.128 >> HCI_Command_Status_EV [0F] [00] [HCI_Accept_Connection_Request]
2015-05-07 01:48:12.284 >> HCI_Role_Change_EV [12]
2015-05-07 01:48:12.315 >> HCI_Connection_Complete_EV [03]
2015-05-07 01:48:12.315 >> HCI_Page_Scan_Repetition_Mode_Change_EV [20]
2015-05-07 01:48:12.331 >> HCI_Max_Slots_Change_EV [1B]
2015-05-07 01:48:24.676 ++ Notify [Removal] [{E2824A09-DBAA-4407-85CA-C8E8FF5F6FFA}] [\\?\USB#VID_054C&PID_0268#6&1A6EA7EB&0&2#{E2824A09-DBAA-4407-85CA-C8E8FF5F6FFA}]
2015-05-07 01:48:24.676 -- Device Removal [00:26:5C:03:C7:B3]
2015-05-07 01:48:24.676 -- USB Device : HID_Worker_Thread Exiting
2015-05-07 01:48:30.263 >> HCI_Connection_Request_EV [04]
2015-05-07 01:48:30.263 << HCI_Delete_Stored_Link_Key [0C12]
2015-05-07 01:48:30.263 << HCI_Remote_Name_Request [0419]
2015-05-07 01:48:30.279 >> HCI_Command_Complete_EV [0E] [00] [HCI_Delete_Stored_Link_Key]
2015-05-07 01:48:30.279 >> HCI_Command_Status_EV [0F] [00] [HCI_Remote_Name_Request]
2015-05-07 01:48:30.310 >> HCI_Remote_Name_Request_Complete_EV [07]
2015-05-07 01:48:30.310 -- Remote Name : E0:AE:5E:B9:7A:0F - PLAYSTATION®3 Controller
2015-05-07 01:48:30.310 << HCI_Accept_Connection_Request [0409]
2015-05-07 01:48:30.310 >> HCI_Command_Status_EV [0F] [00] [HCI_Accept_Connection_Request]
2015-05-07 01:48:30.466 >> HCI_Role_Change_EV [12]
2015-05-07 01:48:30.482 >> HCI_Connection_Complete_EV [03]
2015-05-07 01:48:30.497 >> HCI_Page_Scan_Repetition_Mode_Change_EV [20]
2015-05-07 01:48:30.497 >> L2CAP_Connection_Request [02] PSM [11]
2015-05-07 01:48:30.497 << L2CAP_Connection_Response [03]
2015-05-07 01:48:31.137 << L2CAP_Configuration_Request [04]
2015-05-07 01:48:31.137 >> L2CAP_Configuration_Request [04]
2015-05-07 01:48:31.137 << L2CAP_Configuration_Response [05]
2015-05-07 01:48:31.153 >> L2CAP_Configuration_Response [05]
2015-05-07 01:48:31.168 >> L2CAP_Connection_Request [02] PSM [13]
2015-05-07 01:48:31.168 << L2CAP_Connection_Response [03]
2015-05-07 01:48:31.168 << L2CAP_Configuration_Request [04]
2015-05-07 01:48:31.168 >> L2CAP_Configuration_Request [04]
2015-05-07 01:48:31.168 << L2CAP_Configuration_Response [05]
2015-05-07 01:48:31.168 >> L2CAP_Configuration_Response [05]
2015-05-07 01:48:31.168 << L2CAP_Connection_Request [02] PSM [01]
2015-05-07 01:48:31.184 >> L2CAP_Connection_Response [03] [01]
2015-05-07 01:48:31.184 >> L2CAP_Connection_Response [03] [00]
2015-05-07 01:48:31.184 << L2CAP_Configuration_Request [04]
2015-05-07 01:48:31.199 >> L2CAP_Configuration_Response [05]
2015-05-07 01:48:31.199 >> L2CAP_Configuration_Request [04]
2015-05-07 01:48:31.199 << L2CAP_Configuration_Response [05]
2015-05-07 01:48:31.277 << L2CAP_Disconnection_Request [06]
2015-05-07 01:48:31.293 >> L2CAP_Disconnection_Response [07]
2015-05-07 01:48:31.293 -- Bus Plugin : Serial 2
2015-05-07 01:48:31.293 ++ Plugin Port #2 for [E0:AE:5E:B9:7A:0F]

[RayfenWindspear]

I just got to add that I got one minor problem.
It's that, the server ist establishing and recognizing the bluetooth connection, but the monitor is not. Monitor just says "disconnected" at host, so I have to keep the server window open all the time.
I think the normal way should be the monitor establishing the connection, so I don't need to start the server tool, or how is it supposed to work originally?

Is the service running? The server will run a local service, but the Monitor only connects to the background service. You probably need to start it. See first post.

[ElMariachi]

@Ahmed ALKAABI
If it's a fake controller, you need to right click the monitor's tray icon and open configuration from there.
In configuration check "disable ssp".
Then press Win+R, input services.msc and restart the "SCP DS3 service".

Edit:

Hello, Rayfen!

It's already fixed (that's why I just edited the post!). I simply had to reboot the system, maybe it was just needed to restart the service. I didn't reboot since installing VisualC2013 runtime before.
I'm still not sure about all these tools...

But after initial configuration nothing else but the running service and the monitor is needed, right?
BTW: Do you know if Scarlet is still working at the driver?
What do you think about the "missing runtime" find?

[RayfenWindspear]

If it's a fake controller, you need to right click the monitor's tray icon and open configuration from there.
In configuration check "disable ssp".
Then press Win+R, input services.msc and restart the "SCP DS3 service".

Edit:

Hello, Rayfen!

It's already fixed (that's why I just edited the post!). I simply had to reboot the system, maybe it was just needed to restart the service. I didn't reboot since installing VisualC2013 runtime before.
I'm still not sure about all these tools...

But after initial configuration nothing else but the running service and the monitor is needed, right?
BTW: Do you know if Scarlet is still working at the driver?
What do you think about the "missing runtime" find?

Correct, you will only need service + monitor. Scarlet seems to have been missing for a while. now. He hasn't updated anything in over a year I think.

[Gawish]

RayfenWindspear
>>>Now every thing is ok but only Controller not vibrate when be paired via Bluetooth although vibration working when the controller is connected by the cable.
Thanks in advance

[ElMariachi]

Ok,thank you.
I hope someone will be found for continuing his work,in case he doesn't come back.

[RayfenWindspear]

Ok,thank you.
I hope someone will be found for continuing his work,in case he doesn't come back.

That may very well end up being me. I hope he comes back though, because I don't know very much about bluetooth development.

[Zero3K]

Rayfen: Do you know how to fix the issue where my controller keeps disconnecting then reconnecting every so often? My controller is a Power A Pro Elite Wireless Controller.