XInput Wrapper for DS3 and Play.com USB Dual DS2 Controller

[Aerione]

I currently have the opposite problem that other people have, I think.
I'm trying to get my DS4 working on Windows 8.1 with bluetooth support.
However, I can't seem to be able to uninstall the bluetooth drivers for my bluetooth dongle. Every bluetooth device I connect gets installed with the DS3 drivers, install of the generic bluetooth driver one that is required to connect the DS4.
I've tried to uninstall the drivers directly with the SCPDrivertool and also through the Device Manager, to no avail. Every new bluetooth device still becomes "BTH DS3".
Uh, help?

[RayfenWindspear]

Hi i want to connect my ds3 on my laptop, with cable it works fine but i can't make it work with bluetooth, this is my bluetooth adapter USB\VID_0BDA&PID_B728 i have connected ds4 with bluetooth without problem but not with ds3, please help

Post logs please.

Maybe you paired your bluetooth adapter with ds4 and because of that, you couldn't pair it with ds3. Did you try to uninstall and reinstall with ds3 connected? I don't know if it is possible to pair adapter with ds4 and ds3 both.

The controllers can only be paired with one. The dongle doesn't have that limitation.

Doesn't work. It says "Driver Installation: FAILED (Other Error)". I tried an older version, a newer version and they all say the same thing.

I'm not sure why, perhaps you don't have admin rights? This is the problem though, so it should work if you can figure out how to get it installed.

I currently have the opposite problem that other people have, I think.
I'm trying to get my DS4 working on Windows 8.1 with bluetooth support.
However, I can't seem to be able to uninstall the bluetooth drivers for my bluetooth dongle. Every bluetooth device I connect gets installed with the DS3 drivers, install of the generic bluetooth driver one that is required to connect the DS4.
I've tried to uninstall the drivers directly with the SCPDrivertool and also through the Device Manager, to no avail. Every new bluetooth device still becomes "BTH DS3".
Uh, help?

When you uninstall the driver in the device manager you can select an option to delete it from the local driver repository. Then nothing else can use it.

[RayfenWindspear]

Hello,
Last time you help me with my PANHAI Gamepad.
Now I buy another two dongles for my second PC and I cant get it work. They are on supported list and with one I get BTH 00000000 None error and with other error is described in ScpServer printscreen

I have seen this in another guy's logs. I haven't been able to interpret why it runs the page scan and fails. Dumb question: You did apply the PANHAI fix right?

[Totalwipeout]

I'm not sure why, perhaps you don't have admin rights? This is the problem though, so it should work if you can figure out how to get it installed.

Thanks for the help, I really appreciate it man. But I don't have any other profiles other than the admin, so that I always have rights. It's easier that way. So I don't know anymore.

[Stjepan1403]

I have seen this in another guy's logs. I haven't been able to interpret why it runs the page scan and fails. Dumb question: You did apply the PANHAI fix right?

I apply your modified file , but as I mentioned this is my second pc and I bought two another Bluetooth sticks for it but I forget name of seller from ebay from my first stick which works fine. So I order one from ebay (V2.0) and I get BTH 00000000 None error. After that I bought one in my country (V2.1 + EDR) and I get page scan error...
I don` know why scarlet.crush don`t release some update with better support for dongles and fake gamepads...

[RayfenWindspear]

I apply your modified file , but as I mentioned this is my second pc and I bought two another Bluetooth sticks for it but I forget name of seller from ebay from my first stick which works fine. So I order one from ebay (V2.0) and I get BTH 00000000 None error. After that I bought one in my country (V2.1 + EDR) and I get page scan error...
I don` know why scarlet.crush don`t release some update with better support for dongles and fake gamepads...

I am beginning to wonder if the service that gets bypassed for the PANHAI fix has something to do with the page scan thing. I need to dig around in the code to see what is going on, but my job is keeping me pretty busy right now, so I may not have time until the weekend.

Sadly, Scarlet.Crush hasn't posted in over a year. It might be safe to say that he has abandoned the project, but I really hope he comes back. If not, I think I may take it up, but my knowledge of bluetooth development is limited so I won't be nearly as good as he was.

[deathroll32]

I'm trying to get 4 ps3 controllers to work via bluetooth. Whenever I connect more than 1, one or both controllers become unresponsive intermittently and then start working leaving the others unresponsive. Is there some issue with connecting multiple controllers that I'm not accounting for?

[alandsamuel]

wanna ask,

1. how bout connecting multiple controller using 1 dongle?
2. i already installed all of them, but when i open my scp server, its shows :



3. i install 2 controller, but why this happening?

[RayfenWindspear]

I'm trying to get 4 ps3 controllers to work via bluetooth. Whenever I connect more than 1, one or both controllers become unresponsive intermittently and then start working leaving the others unresponsive. Is there some issue with connecting multiple controllers that I'm not accounting for?

Are they all the same brand controllers?

wanna ask,

1. how bout connecting multiple controller using 1 dongle?
2. i already installed all of them, but when i open my scp server, its shows :



3. i install 2 controller, but why this happening?

You are using an old version. Apply the update.

[Totalwipeout]

Actually, which one do I have to install from zadig? WinUSB, libusbK or libusb-win32?