XInput Wrapper for DS3 and Play.com USB Dual DS2 Controller

[Rily]

@Rily: pin-hole reset - disconnect your DS3 from USB, on the back of your DS3 you'll see a small circular hole to the right of the centre screw. Insert a pin into this hole and gently push until you feel a slight click, hold at this position for 10 seconds then release it.

for 10 seconds, for 20 seconds, i should see a led flashing or some signal? i did it but i don't now if i need restar ds3 service or te pc, because still not working

[x_berzerker]

hey dudes could you explain why scpservice.exe consumes bandwidth? (actually ~11kb for upload in resmon)

[prova]

Thank you very much with dll version 166 everything works fine also with my joypads!

[chroma]

Hi

Without wanting to search too deep, and no information in the O.P. regarding this program's capabilities being present, I'd like to ask given the development clearly being made with this project if 6axis control (that is, the PS3 controller's motion controls: gyro/accelerometer) is possible now?

From the image posted through this link a few pages back ( http://forums.pcsx2.net/attachment.php?aid=49599 ) it almost gives me hope that it has been included with options such as "DS3 axis"...

And if it is supported, how do I go about implementing it? I have a couple of very specific games that I could really use this kind of control for.

Either way, thanks.

p.s.
Is it possible to simultaneously use the bluetooth dongle for my wireless keyboard along with a PS3 controller? Or would the service interrupt the keyboard functionality?

[dink]

hey dudes could you explain why scpservice.exe consumes bandwidth? (actually ~11kb for upload in resmon)

It uses a local connection between the driver and scpmonitor and service to communicate, it doesn't actually leave the computer or go out on the internet.

best regards,
- dink

[HyeVltg3]

Is there a way to check battery status of the DS4 yet?
is there some way to convert the hex "Charging" numbers into a percentage?

Dongle: USB\VID_0CF3&PID_3002&REV_0001
Controller: DS4

Just updated to 1.2.0.160 (+.165 update) ( from 1.1.0.136) <<<< DS4 was working in this version


Getting this error on trying to run DsPair.exe as Admin

Exception message

Code:

See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.MissingMethodException: Method not found: 'ScpControl.DeviceState ScpControl.BthDongle.get_State()'.
   at Ds4Pair.Ds4Form.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.18444 built by: FX451RTMGDR
    CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v4.0.30319/mscorlib.dll
----------------------------------------
Ds4Pair
    Assembly Version: 1.1.0.136
    Win32 Version: 1.1.0.136
    CodeBase: file:///C:/Program%20Files/XInput%20Wrapper%20for%20DS3/ScpServer/bin/Ds4Pair.exe
----------------------------------------
System.Windows.Forms
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System
    Assembly Version: 4.0.0.0
    Win32 Version: 4.0.30319.18408 built by: FX451RTMGREL
    CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
ScpControl
    Assembly Version: 1.2.1.165
    Win32 Version: 1.2.1.165
    CodeBase: file:///C:/Program%20Files/XInput%20Wrapper%20for%20DS3/ScpServer/bin/ScpControl.DLL
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
    <system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

DsPairErro.jpg - Error window has extra detail not pasted above
Installed.jpg - Programs and Features showing Framework version and Visual C installed.

Oops didnt read the part about DsPair not being needed anymore. But my DS4 still does not connect via BT after being unplugged from USB

[electrobrains]

Hi

Without wanting to search too deep, and no information in the O.P. regarding this program's capabilities being present, I'd like to ask given the development clearly being made with this project if 6axis control (that is, the PS3 controller's motion controls: gyro/accelerometer) is possible now?

From the image posted through this link a few pages back ( http://forums.pcsx2.net/attachment.php?aid=49599 ) it almost gives me hope that it has been included with options such as "DS3 axis"...

And if it is supported, how do I go about implementing it? I have a couple of very specific games that I could really use this kind of control for.

Either way, thanks.

p.s.
Is it possible to simultaneously use the bluetooth dongle for my wireless keyboard along with a PS3 controller? Or would the service interrupt the keyboard functionality?

Check out my DS4Windows project to see what the DualShock4's SixAxis stuff looks like. I haven't added bindings yet but it details the data you get. I can help you walk through it to find that information if you like.

[randito34]

hello
i can use my ds3 using usb cable
but i can't use it via bluetooth
i was installed the bth driver in scpdriver.exe
then the bluetooth icon remains visible in system tray
so i can't connect the ds3
any suggestions?

[Mikhail0]

PLAYSTATION®3Conteroller-ghic 00:18:01:0A:C1:E7 won't connect

Code:

2014-03-24 13:11:09.593 ++ C:\Program Files\Scarlet.Crush Productions\ScpServer.exe  1.2.0.160
2014-03-24 13:11:09.609 ++ C:\Program Files\Scarlet.Crush Productions\ScpControl.dll 1.2.1.167
2014-03-24 13:11:09.718 ++ Microsoft Windows XP Home Edition Service Pack 3 (5.1.2600.196608 x86)
2014-03-24 13:11:09.718 -- Bus Open   : Offset 0
2014-03-24 13:11:09.734 -- Bus Open   : Path \\?\ROOT#SYSTEM#0003#{F679F562-3164-42CE-A4DB-E7DDBE723909}
2014-03-24 13:11:09.812 ## Mapper.Initialize() - Profiles [5] Active [Default] Mappings [0]
2014-03-24 13:11:09.875 -- Bluetooth  : HCI_Worker_Thread Starting [81]
2014-03-24 13:11:09.890 << HCI_Reset [0C03]
2014-03-24 13:11:10.015 >> HCI_Command_Complete_EV [0E] [00] [HCI_Reset]
2014-03-24 13:11:10.281 << HCI_Read_BD_ADDR [1009]
2014-03-24 13:11:10.281 >> HCI_Command_Complete_EV [0E] [00] [HCI_Read_BD_ADDR]
2014-03-24 13:11:10.296 << HCI_Read_Buffer_Size [1005]
2014-03-24 13:11:10.312 >> HCI_Command_Complete_EV [0E] [00] [HCI_Read_Buffer_Size]
2014-03-24 13:11:10.312 -- 0136, 40, 000A, 0008
2014-03-24 13:11:10.468 << HCI_Read_Local_Version_Info [1001]
2014-03-24 13:11:10.484 >> HCI_Command_Complete_EV [0E] [00] [HCI_Read_Local_Version_Info]
2014-03-24 13:11:10.484 -- Master 00:15:83:4C:3A:5B, HCI_Version 6.22BB, LMP_Version 6.22BB
2014-03-24 13:11:10.500 << HCI_Write_Scan_Enable [0C1A]
2014-03-24 13:11:10.500 >> HCI_Command_Complete_EV [0E] [00] [HCI_Write_Scan_Enable]
2014-03-24 13:11:10.812 -- Bluetooth  : L2CAP_Worker_Thread Starting [82,02]
2014-03-24 13:11:11.812 -- Controller : UDP_Worker_Thread Starting
2014-03-24 13:11:18.234 >> HCI_Connection_Request_EV [04]
2014-03-24 13:11:18.250 << HCI_Delete_Stored_Link_Key [0C12]
2014-03-24 13:11:18.265 << HCI_Remote_Name_Request [0419]
2014-03-24 13:11:18.296 >> HCI_Command_Complete_EV [0E] [00] [HCI_Delete_Stored_Link_Key]
2014-03-24 13:11:18.312 >> HCI_Command_Status_EV [0F] [00] [HCI_Remote_Name_Request]
2014-03-24 13:11:18.343 >> HCI_Remote_Name_Request_Complete_EV [07]
2014-03-24 13:11:18.343 -- Remote Name : 00:18:01:0A:C1:E7 - PLAYSTATION(R)3Conteroller-ghic
2014-03-24 13:11:18.359 << HCI_Accept_Connection_Request [0409]
2014-03-24 13:11:18.375 >> HCI_Command_Status_EV [0F] [00] [HCI_Accept_Connection_Request]
2014-03-24 13:11:18.515 >> HCI_Role_Change_EV [12]
2014-03-24 13:11:18.546 >> HCI_Connection_Complete_EV [03]
2014-03-24 13:11:18.578 >> HCI_Page_Scan_Repetition_Mode_Change_EV [20]
2014-03-24 13:11:33.890 >> HCI_Disconnection_Complete_EV [05]
2014-03-24 13:11:33.921 >> HCI_Connection_Request_EV [04]
2014-03-24 13:11:33.937 << HCI_Delete_Stored_Link_Key [0C12]
2014-03-24 13:11:33.953 << HCI_Remote_Name_Request [0419]
2014-03-24 13:11:33.984 >> HCI_Command_Complete_EV [0E] [00] [HCI_Delete_Stored_Link_Key]
2014-03-24 13:11:34.000 >> HCI_Command_Status_EV [0F] [00] [HCI_Remote_Name_Request]
2014-03-24 13:11:34.031 >> HCI_Remote_Name_Request_Complete_EV [07]
2014-03-24 13:11:34.046 -- Remote Name : 00:18:01:0A:C1:E7 - PLAYSTATION(R)3Conteroller-ghic
2014-03-24 13:11:34.062 << HCI_Accept_Connection_Request [0409]
2014-03-24 13:11:34.093 >> HCI_Command_Status_EV [0F] [00] [HCI_Accept_Connection_Request]
2014-03-24 13:11:34.234 >> HCI_Role_Change_EV [12]
2014-03-24 13:11:34.265 >> HCI_Connection_Complete_EV [03]
2014-03-24 13:11:34.281 >> HCI_Page_Scan_Repetition_Mode_Change_EV [20]
2014-03-24 13:11:49.609 >> HCI_Disconnection_Complete_EV [05]
2014-03-24 13:11:49.640 >> HCI_Connection_Request_EV [04]
2014-03-24 13:11:49.671 << HCI_Delete_Stored_Link_Key [0C12]
2014-03-24 13:11:49.687 << HCI_Remote_Name_Request [0419]
2014-03-24 13:11:49.703 >> HCI_Command_Complete_EV [0E] [00] [HCI_Delete_Stored_Link_Key]
2014-03-24 13:11:49.734 >> HCI_Command_Status_EV [0F] [00] [HCI_Remote_Name_Request]
2014-03-24 13:11:49.765 >> HCI_Remote_Name_Request_Complete_EV [07]
2014-03-24 13:11:49.781 -- Remote Name : 00:18:01:0A:C1:E7 - PLAYSTATION(R)3Conteroller-ghic
2014-03-24 13:11:49.796 << HCI_Accept_Connection_Request [0409]
2014-03-24 13:11:49.828 >> HCI_Command_Status_EV [0F] [00] [HCI_Accept_Connection_Request]
2014-03-24 13:11:49.968 >> HCI_Role_Change_EV [12]
2014-03-24 13:11:50.000 >> HCI_Connection_Complete_EV [03]
2014-03-24 13:11:50.015 >> HCI_Page_Scan_Repetition_Mode_Change_EV [20]
2014-03-24 13:12:05.343 >> HCI_Disconnection_Complete_EV [05]
2014-03-24 13:12:05.531 >> HCI_Connection_Request_EV [04]
2014-03-24 13:12:05.546 << HCI_Delete_Stored_Link_Key [0C12]
2014-03-24 13:12:05.546 << HCI_Remote_Name_Request [0419]
2014-03-24 13:12:05.562 >> HCI_Command_Complete_EV [0E] [00] [HCI_Delete_Stored_Link_Key]
2014-03-24 13:12:05.578 >> HCI_Command_Status_EV [0F] [00] [HCI_Remote_Name_Request]
2014-03-24 13:12:05.609 >> HCI_Remote_Name_Request_Complete_EV [07]
2014-03-24 13:12:05.609 -- Remote Name : 00:18:01:0A:C1:E7 - PLAYSTATION(R)3Conteroller-ghic
2014-03-24 13:12:05.640 << HCI_Accept_Connection_Request [0409]
2014-03-24 13:12:05.640 >> HCI_Command_Status_EV [0F] [00] [HCI_Accept_Connection_Request]
2014-03-24 13:12:05.781 >> HCI_Role_Change_EV [12]
2014-03-24 13:12:05.796 >> HCI_Connection_Complete_EV [03]
2014-03-24 13:12:05.828 >> HCI_Page_Scan_Repetition_Mode_Change_EV [20]
2014-03-24 13:12:15.968 ## Mapper.Shutdown()
2014-03-24 13:12:15.968 << HCI_Disconnect [0406]
2014-03-24 13:12:16.484 << HCI_Reset [0C03]
2014-03-24 13:12:15.968 -- Controller : UDP_Worker_Thread Exiting
2014-03-24 13:12:15.968 >> HCI_Command_Status_EV [0F] [00] [HCI_Disconnect]
2014-03-24 13:12:16.984 -- Bluetooth  : L2CAP_Worker_Thread Exiting
2014-03-24 13:12:16.984 -- Bluetooth  : HCI_Worker_Thread Exiting

[Scarlet.Crush]

@Rily: after completing the pin-hole reset, press the PS Button. If your DS3 is still not connecting repeat the procedure I outlined before and post your zipped ScpService.log as an attachment.

@x_berzerker: as dink said, ScpService uses localhost UDP connections to provide status details to ScpMonitor and also to publish the Native feed. This data stays internal to your machine, it never reaches your network card. You can disable Native Feed in Configuration Options in ScpMonitor & then close ScpMonitor, you will see the usage drop to 0.

Native Feed : a DS3 on USB sends reports every 10ms, each report is formatted into a Native Feed packet which is 96 bytes. 96 * 100 = 9.6 KB/s.

ScpMonitor sends a status request every 100ms to ScpService. Status data is returned as a variable length string ~150 bytes in length. 150 * 10 = 1.5 KB/s.

Localhost UDP connections are implemented by Windows as shared memory blocks, not by the Network driver stack.

@chroma: currently no, sixaxis data is not exposed. I am looking at ways that this could be exposed and used, but I would want to normalise it for consistant usage across DS3 & DS4.

@HyeVltg3: did you follow the Repair procedure outlined in Post #2505?

@randito34: can you do the following -

1. Disconnect your DS3 from USB.
2. Reboot your PC.
3. Start ScpMonitor. [Do you see HCI & LMP Version information for your Dongle?]
4. Plugin your DS3 to USB.
5. Wait 10 seconds.
6. Unplug your DS3 from USB. [Do you see the LEDs flashing?]
7. Wait 30 seconds.
8. Plugin your DS3 to USB.
9. Wait 10 seconds.
10. Zip up your ScpService.log & ScpDriver.log and post as an attachment.

@Mikhail0: don't see it attempting to connect the L2CAP channels (PSM [11] & PSM [13). I implemented the same fix as yetifrisstlama2 so should work with your controller, do you have an ScpService.log from when you were using it? Can you also try a pin-hole reset of the controller.

btw. the "00:16:FE:71" signature presents with the name PLAYSTATION®3Conteroller-VINS, so assuming these are from the same manufacturer with a slightly different version of firmware.