06-14-2013, 05:08 PM
@hoeboo: it sounds like the Bluetooth is signal is getting interference, are you using any other radio devices?
@Polarathene: the drivers request the remote devices name using an HCI_Remote_Name_Request and perform the following test
@mikezilla2: yes, Post #1 contains the latest release version.
@reading: added an update for your hardware id, see Post #1.
@Ocitda: you won't need to run the installer again, just need to plug in your new DS3s. They will be automatically installed by Windows.
@dogslop: the log shows that there is a timeout occurring while attempting to install the BTH driver. cblair had a similar problem which was fixed by changing the USB port that the device was plugged in to and res-installing the drivers.
@DragonKing: it's more of a mismatch between what the MS 360 Drivers provide and what FFXI can use. I am looking to provide a solution fro this in the next release of the drivers.
@logik92: rerun the install and tick the Force Install checkbox.
@Dkboy: note the yellow triangle with an exclamation on your X360 Pad in Devices and Printers. You need to update the Microsoft X360 drivers on your PC.
@Polarathene: the drivers request the remote devices name using an HCI_Remote_Name_Request and perform the following test
Code:
if (Name == "PLAYSTATION(R)3 Controller" || Name == "Navigation Controller")
{
NameList.Add(bd, nm.ToString());
Transfered = HCI_Accept_Connection_Request(BD_Addr, 0x00);
LogDebug(String.Format("<< {0} [{1:X4}]", HCI.Command.HCI_Accept_Connection_Request, (UInt16) HCI.Command.HCI_Accept_Connection_Request));
}
else
{
Transfered = HCI_Reject_Connection_Request(BD_Addr, 0x0F);
LogDebug(String.Format("<< {0} [{1:X4}]", HCI.Command.HCI_Reject_Connection_Request, (UInt16) HCI.Command.HCI_Reject_Connection_Request));
}
@mikezilla2: yes, Post #1 contains the latest release version.
@reading: added an update for your hardware id, see Post #1.
@Ocitda: you won't need to run the installer again, just need to plug in your new DS3s. They will be automatically installed by Windows.
@dogslop: the log shows that there is a timeout occurring while attempting to install the BTH driver. cblair had a similar problem which was fixed by changing the USB port that the device was plugged in to and res-installing the drivers.
@DragonKing: it's more of a mismatch between what the MS 360 Drivers provide and what FFXI can use. I am looking to provide a solution fro this in the next release of the drivers.
@logik92: rerun the install and tick the Force Install checkbox.
@Dkboy: note the yellow triangle with an exclamation on your X360 Pad in Devices and Printers. You need to update the Microsoft X360 drivers on your PC.
Quote:Xbox 360 Controller Drivers - these are available from Microsoft here.