XInput Wrapper for DS3 and Play.com USB Dual DS2 Controller

[cb2025]

Nope, you need to run the ScpDriver and click the "unistall button" in order to unistall it properly, then you can delete the Scarlett.Crush folder.

Thanks! I finally managed to get it right, much appreciated.

[RaGeSpectral]

i use this and is very useful but i have problems with TERA (http://tera.enmasse.com) and this have compatibility with PS3 and Xbox joysticks but the buttons are uncalibrated , when i press "select" works at "X" , when i press "R2" works "Select" , etc... And i don't know how repair this. Exist somehow to configure the button mapping?

PD: Sorry for my english but this don't is my native languaje

[Tschloken]

Hey, the posts said to add Hardware Id's for bluetooth dongles so here's mine.

Hardware Id's;
USB\VID_148F&PID_3298&REV_0000
USB\VID_148F&PID_3298

Cheers.

[eyeonus]

If you are sure your bluetooths support EDR and are listed on the first page, then maybe you need to install the ScpDriver again (unistall it first) but this time with a check in the "force install" box (even if you have windows 7 or 8).

I'm not using bluetooth, I'm using USB. I don't want to use bluetooth either.

My problem is that the driver is not working at all, not that my non-existent bluetooth dongle isn't working.

[dallonz88]

If you are sure your bluetooths support EDR and are listed on the first page, then maybe you need to install the ScpDriver again (unistall it first) but this time with a check in the "force install" box (even if you have windows 7 or 8).

First of all, thanks for your reply.
I tried as you said but it still doesn't work... I'm not sure anymore my dongle is compatible as the first page list says...
And, btw, my pad became very strange at its blink (more slower then normal) I'm quite afraid about it and probably I woun't try anithing else (am I over-reacting? Probably yes... But it's still my only 1 pad =/ )

[khaled_7]

Hello guys.
I need your help. I've been suffering this problem since I started to use this tool.
(bluetooth connection)
after first install the controller works perfectly but suddenly (after shutdown/sleep/hibernation) when i press the PS button my controller doesnt find my computer. I don't know why. so i need to uninstall & reinstall so it works again and so on. that was on an older version. 0.7 something.
I just updated it to the latest 1.0.103 yesterday and the problem still happens but even worse ! sometimes even reinstalling doesnt fix it. the controller gets connected normally and the buttons monitor responds BUT the scpservice.exe doesn't say that the controller is connected (SO WEIRD !) and the game doesnt consider it's connected. this thing didnt happen with the old version. just a reinstall used to fix it ALWAYS.

windows 8 64bit

[wyfer]

Hello guys.
I need your help. I've been suffering this problem since I started to use this tool.
(bluetooth connection)
after first install the controller works perfectly but suddenly (after shutdown/sleep/hibernation) when i press the PS button my controller doesnt find my computer. I don't know why. so i need to uninstall & reinstall so it works again and so on. that was on an older version. 0.7 something.
I just updated it to the latest 1.0.103 yesterday and the problem still happens but even worse ! sometimes even reinstalling doesnt fix it. the controller gets connected normally and the buttons monitor responds BUT the scpservice.exe doesn't say that the controller is connected (SO WEIRD !) and the game doesnt consider it's connected. this thing didnt happen with the old version. just a reinstall used to fix it ALWAYS.

windows 8 64bit

Hi khaled_7,
I had the exact same problem. My fix is to stop the scp service, install original bt driver, install scp driver without the scp tool but from device manager and start the service again.

With the nice tool devcon.exe i made a bat. file that does this fast every start/wakeup without the problem that other apps not recognizing the pad
devcon for win7/8 64bit: http://delphintipz.blogspot.de/2012/07/d...abled.html

the file looks like this:
net Stop "SCP DS3 Service"
devcon.exe update "C:\Windows\System32\DriverStore\FileRepository\qca_btusb.inf_amd64_65456a64af54d\qca_btusb.inf" "USB\VID_0CF3&PID_3004&REV_0001"
devcon.exe update "C:\Windows\System32\DriverStore\FileRepository\bthwinusb.inf_amd64_8495fa65842d1\BthWinUsb.inf" "USB\VID_0CF3&PID_3004&REV_0001"
net Start "SCP DS3 Service"

You have to change the driver location and the HW-ID of your bt-dongle.
I found the driver location by completely removing and reinstalling booth original and scp drivers and sorting C:\Windows\System32\DriverStore\FileRepository folder by time.

As a nice side effect you can use the first half of the code to deactivate scp to use your bt normal with other devices and the second half of the code to activate it to pair your ds3 again.

I hope this will help you.

[khaled_7]

Hi khaled_7,
I had the exact same problem. My fix is to stop the scp service, install original bt driver, install scp driver without the scp tool but from device manager and start the service again.

With the nice tool devcon.exe i made a bat. file that does this fast every start/wakeup without the problem that other apps not recognizing the pad
devcon for win7/8 64bit: http://delphintipz.blogspot.de/2012/07/d...abled.html

the file looks like this:
net Stop "SCP DS3 Service"
devcon.exe update "C:\Windows\System32\DriverStore\FileRepository\qca_btusb.inf_amd64_65456a64af54d\qca_btusb.inf" "USB\VID_0CF3&PID_3004&REV_0001"
devcon.exe update "C:\Windows\System32\DriverStore\FileRepository\bthwinusb.inf_amd64_8495fa65842d1\BthWinUsb.inf" "USB\VID_0CF3&PID_3004&REV_0001"
net Start "SCP DS3 Service"

You have to change the driver location and the HW-ID of your bt-dongle.
I found the driver location by completely removing and reinstalling booth original and scp drivers and sorting C:\Windows\System32\DriverStore\FileRepository folder by time.

As a nice side effect you can use the first half of the code to deactivate scp to use your bt normal with other devices and the second half of the code to activate it to pair your ds3 again.

I hope this will help you.

thank you. this is a good alternative
but it's is a little complicated to me. I don't have experience in making bat files and codes like this
my bluetooth is built in the laptop. Plus, doesn't this procedure slows the computer's startup every time it starts ??
do you know what's the cause of this problem ?? why does it do this ?

[Huesoman]

I'm not using bluetooth, I'm using USB. I don't want to use bluetooth either.

My problem is that the driver is not working at all, not that my non-existent bluetooth dongle isn't working.

Again, leaving the BT thing apart, maybe you need to install the ScpDriver again (unistall it first) but this time with a check in the "force install" box (even if you have windows 7 or 8).

[Huesoman]

First of all, thanks for your reply.
I tried as you said but it still doesn't work... I'm not sure anymore my dongle is compatible as the first page list says...
And, btw, my pad became very strange at its blink (more slower then normal) I'm quite afraid about it and probably I woun't try anithing else (am I over-reacting? Probably yes... But it's still my only 1 pad =/ )

These are the BT hardware ids supported:
Currently Supported Dongles
USB\VID_03F0&PID_231D
USB\VID_045E&PID_3500
USB\VID_0461&PID_4D75
USB\VID_046D&PID_C709
USB\VID_047D&PID_105E
USB\VID_0489&PID_E011
USB\VID_0489&PID_E042
USB\VID_0489&PID_E04E
USB\VID_04CA&PID_3006
USB\VID_050D&PID_016A
USB\VID_05AC&PID_821A
USB\VID_05AC&PID_821F
USB\VID_07D1&PID_F101
USB\VID_0930&PID_0215
USB\VID_0A12&PID_0001
USB\VID_0A5C&PID_200A
USB\VID_0A5C&PID_2101
USB\VID_0A5C&PID_2146
USB\VID_0A5C&PID_2148
USB\VID_0A5C&PID_2150
USB\VID_0A5C&PID_2153
USB\VID_0A5C&PID_217D
USB\VID_0A5C&PID_2198
USB\VID_0A5C&PID_21E1
USB\VID_0A5C&PID_21E8
USB\VID_0B05&PID_1715
USB\VID_0B05&PID_1783
USB\VID_0B05&PID_1785
USB\VID_0B05&PID_179C
USB\VID_0B05&PID_17B5
USB\VID_0B05&PID_B700
USB\VID_0C10&PID_0000
USB\VID_0CF3&PID_3002
USB\VID_0CF3&PID_3004
USB\VID_0CF3&PID_3005
USB\VID_0DB0&PID_3801
USB\VID_0DF6&PID_2200
USB\VID_0E5E&PID_6622
USB\VID_1131&PID_1001
USB\VID_1131&PID_1004
USB\VID_1286&PID_2044&MI_00
USB\VID_13D3&PID_3304
USB\VID_413C&PID_8126
USB\VID_8086&PID_0189
USB\VID_8087&PID_07DA
Plus
USB\VID_0930&PID_0214
USB\VID_0A5C&PID_2154
USB\VID_0489&PID_E04D
USB\VID_413C&PID_8197
USB\VID_0A5C&PID_2021
USB\VID_05AC&PID_8286
USB\VID_0A5C&PID_2100
USB\VID_0BDA&PID_8723
USB\VID_044E&PID_3010
USB\VID_0B05&PID_1788
USB\VID_0A5C&PID_2190
USB\VID_13D3&PID_3315
USB\VID_0489&PID_E027
USB\VID_05AC&PID_821D
USB\VID_0BDA&PID_0724
USB\VID_050D&PID_065A
USB\VID_0A5C&PID_21E3
USB\VID_05AC&PID_8216
USB\VID_0A5C&PID_21B4
But you should know that even with this hardware ids some reviews are not supported. Yeah I understand you are a little afraid, it's normal, I was afraid too, but after reading 154 pages of this thread the worst issue I found is that in very few cases the DS3 controller stop working but it has a very easy solution: push the reset button in its back and voila! it will work again, no major issues besides what I just explained. I search a lot in this thread and reply to various users, you can check out all my posts,
http://forums.pcsx2.net/search.php?actio...ddf82f0d67
maybe I already gave an answer. But I will add this: make sure to have installed these:
Requirements
1. Microsoft .NET 4.0
2. Visual C 2010 Runtime.
3. Latest DirectX Runtime.
4. Latest Xbox 360 Controller Drivers available.
5. Genuine Sony DualShock3 or SixAxis Controller(s).
6. Minimum of Bluetooth 2.0 + EDR Dongle (if using Bluetooth).
7. Administrator rights on your PC.
Hope this helps, sadly there isn't a proper tutorial about how to deal with these tiny issues, but I can guaranteed that after you make it work it is awesome, the DS3 is a very durable controller, I was using my Logitech Cordless precision for my PC and just yesterday my d-pad left directional isn't working properly, I don't like the d-pad because seems cheap, but the DS3' d-pad is STRONG, it is something difficult to getting used to it when playing fighting games but it works (although I recommend to use some kind of protection for your thumb). So, I'm happy I can use the DS3 on my pc. BTW, the logitech is good and all, it is just that the d-pad just doesn't feel "right" to me, maybe it is because I play fighting games and press a little hard the directions, I don't know. Back on topic, give it a try, I recommend you to read this thread from post #639 (page 64) onwards, maybe you can find something useful related to your problem, at least it worked for me, you don't need to do this in one day, give it an hour a day and you will be fine.