Posts: 10
Threads: 0
Joined: Jul 2014
Reputation:
0
All is fine. Recreating Profiles.xml fixed everything - Sleeping Dogs too.
Any ETA on touchpad 360 macros and trigger sensitivity ?
Posts: 15
Threads: 0
Joined: Jun 2014
Reputation:
0
So I narrowed down my freezing issue to the "Hide DS4 Controller" option. Whenever I start Teamspeak and now Farcry 3 as well with that enabled it causes everything to lock up for a matter of time like I demonstrated before. This also happens with other DS4tool's from which this one is derived. I'm curious if you can replicate the issue if you start TS3 while having the Hide DS4 controller option checked in the tool. I really would like to get this issue resolved even though I've accepted it and have no idea why disabling that would cause it =(
Posts: 3
Threads: 0
Joined: Aug 2014
Reputation:
0
08-11-2014, 11:01 AM
(This post was last modified: 08-11-2014, 12:07 PM by butterslol.)
EDIT: So I had some issues, but I have resolved them now, because I can't delete the post I'll explain and others might find it useful. Basically I had been trying to get the DS4 running using my computers onboard bluetooth, I had successfully got things running on another laptop and then moved onto my lounge PC. I didn't realise it, but when the DS4Windows tool installed it tried to install the SCP Drivers which were not compatible with my bluetooth built-in adapter (found this out later running the SCPDriver.exe manually). Luckily I had an old Bluetooth 2.0 dongle I could use, so I plugged it in and re-installed the SCPDriver manually. When I then hooked it up to the USB with the DS4Windows tool open, it connected automatically. Then I unplugged it and it worked!
Also, I tried disabling the on-board bluetooth (I was worried it may interfere with the dongle), however the controller would then only work via USB. Still, I can connect everything else to the onboard BT and the dongle seemingly co-exists fine.
Now the only thing to sort out now is my account. I donated before I registered, so I don't think the automatic thing will work. Should I PM you jhebbel with my email address to verify?