Posts: 11
Threads: 0
Joined: Feb 2014
Reputation:
0
Oh, got ya. A few problems still exist, however. ScpMonitor detects the controller on pad1 through USB and increments as normal, but when unplugged because the bluetooth functionality doesn't seem to be working, it says it is reserved. Also, the Host Address in the upper left of the dialog now reads "error" through both USB and attempting bluetooth.
Posts: 574
Threads: 2
Joined: Jun 2011
Reputation:
93
@Abcdude:
Control Panel -> Devices and Printers, right-click on the Xbox 360 Controller for Windows, select Game controller settings.
Click the Properties button, select the Settings tab.
@RenegadeRacer:
1. Shutdown your PC.
2. Unplug your Dongle from USB.
3. Wait 30 seconds.
4. Plug your dongle back in to USB.
5. Start your PC.
Posts: 5
Threads: 0
Joined: Feb 2014
Reputation:
0
Dear Scarlet Crush,
First off many thanks for the effort into this tool I'd like to share with you what happened me and if you could help.
I initially used by DS4 plugged via USB via the inhexster tool. It worked with no problems. However I recently purchased a bluetooth 4.0 adapter with EDR as advertised branded promate. It was detecting as a CSR8510 A10, a cambridge silicon radio chip and I attempted to install drivers to it and despite sometimes detecting the DS4 it would not pair citing errors or taking too long to pair. I decided to shift to your tool.
I have followed the instructions for installing the drivers on dongle and on the ds4 controller and have the following issues/questions.
1. The ds4 currently works with your scpmonitor with full functionality but if I unplug and replug the controller via usb it is lost and I need to reset to detect. Is there anyway via Zandig to roll back to original ds4 drivers? if not thats cool cos its still very functional.
2. what else can i do to get to the bluetooth to pair? the bluetooth dongle hardware ID is USB\VID_0A12&PID_0001&REV_8891 and it was classified as a DS3 BLTH under the device manager. Please let me know what logs or information I should try :/ I'm really happy with the controller and I really do think the dongle should be compatible
Many thanks in advance for your time and patience You Rox!!!
Posts: 10
Threads: 0
Joined: Feb 2014
Reputation:
0
From what I see, apparently my computer is registering the Control Pad on my DS3 as the X and Y axis, and won't detect the right stick at all.
This is the weirdest thing, lol.
Posts: 3
Threads: 0
Joined: Feb 2014
Reputation:
0
Hello Scarlet,
I've been trying to use your program since MotionInJoy keeps giving me BSOD's but I can't seem to get it working properly. I tried removing it and reinstalling it, but it says my controller isn't connected.
Could you help me out?
Thanks in advance
Posts: 574
Threads: 2
Joined: Jun 2011
Reputation:
93
02-05-2014, 09:36 PM
(This post was last modified: 02-05-2014, 09:43 PM by Scarlet.Crush.)
@Samoora: can you do the following -
1. Have your DS4 plugged in to USB.
2. Shutdown your PC.
3. Startup your PC.
4. Run ScpMonitor.
5. Unplug your DS4 from USB.
6. Wait 30 seconds.
7. Plug it back in to USB. [Do you hear the bing-bong Windows Device Arrival Sound?]
8. Zip up your ScpService.log and post as an attachment.
Is your DS4 connected to a front-panel or back-panel USB port?
@Abcdude: sounds like you still have some MotionInJoy driver files installed. Can you do the following.
1. Open Device Manager.
2. On the menu bar - View -> Devices by connection.
3. Expand the Scp Virtual Bus Driver node, and any sub-nodes.
4. Take a screenshot and post as an attachment.
@damron17: Can't think what's going wrong, only thing left to try would be a fresh install of Vista.
@Methyx: can you zip up your ScpService.log and ScpDriver.log and post as an attachment.