..:: PCSX2 Forums ::..

Full Version: PCSX2-CE for Mac (Wineskin) Oct 2015 Guide
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Lily pad will only recognize your controller if your computer recognizes it. PS2 controllers won't work as far as I've seen, and PS3 controllers can be finicky unless you get the actual Sony brand controller, which I realize can be expensive. 360 controllers require a driver software as well as a receiver to plug into your computer.

Graphics and Lilypad probably aren't acting up because of the same problem. Try changing your graphics settings or reburning the Iso from your disk to fix Kingdom hearts.
I have a similar problem to Sonatina's: the app crashes upon startup. I have all the dependencies installed, have tried using a number of different versions of P2SX, different Wine engines, and get the same result. A program error box immediately pops up and states "The program pcsx2.exe has encountered a serious problem and needs to close". I've included the two log reports below and system info. 

Any help you might be able to provide would be greatly appreciated. 
Sonatina
"wine: Unhandled page fault on execute access to 0x00000000 at address 0x0 (thread 0009), starting debugger..."

http://pastebin.com/MMxg37jX
http://pastebin.com/qCbZtU2P
I get this message when I test run in Wineskin. Can someone point me to the files I need to make it work? I'm a bit of a noob at this sort of thing Tongue
err:module:import_dll Library MSVCP140.dll (which is needed by L"C:\\Program Files\\pcsx2-v1.5.0-dev-512-g7f3f6e9-windows-x86\\pcsx2.exe") not found
err:module:LdrInitializeThunk Main exe initialization for L"C:\\Program Files\\pcsx2-v1.5.0-dev-512-g7f3f6e9-windows-x86\\pcsx2.exe" failed, status c0000135
(07-19-2016, 12:37 PM)TranscendentMoose Wrote: [ -> ]I get this message when I test run in Wineskin. Can someone point me to the files I need to make it work? I'm a bit of a noob at this sort of thing Tongue
err:module:import_dll Library MSVCP140.dll (which is needed by L"C:\\Program Files\\pcsx2-v1.5.0-dev-512-g7f3f6e9-windows-x86\\pcsx2.exe") not found
err:module:LdrInitializeThunk Main exe initialization for L"C:\\Program Files\\pcsx2-v1.5.0-dev-512-g7f3f6e9-windows-x86\\pcsx2.exe" failed, status c0000135

you need to use winetricks vcrun2015 from the winetricks menu in the wine wrapper

(07-19-2016, 06:26 AM)emkan Wrote: [ -> ]I have a similar problem to Sonatina's: the app crashes upon startup. I have all the dependencies installed, have tried using a number of different versions of P2SX, different Wine engines, and get the same result. A program error box immediately pops up and states "The program pcsx2.exe has encountered a serious problem and needs to close". I've included the two log reports below and system info. 

Any help you might be able to provide would be greatly appreciated. 
Sonatina
"wine: Unhandled page fault on execute access to 0x00000000 at address 0x0 (thread 0009), starting debugger..."

http://pastebin.com/MMxg37jX
http://pastebin.com/qCbZtU2P

Use "Test Run" in the wine menu to see what went wrong (it gives full log)
(07-19-2016, 01:56 PM)uyjulian Wrote: [ -> ]you need to use winetricks vcrun2015 from the winetricks menu in the wine wrapper


Use "Test Run" in the wine menu to see what went wrong (it gives full log)

I just did and it gives the exact same log as above. (This was after successfully completing all the steps here: http://forums.pcsx2.net/Thread-PCSX2-CE-...2015-Guide)

Alternatively I tried using the 1.0.7 version. (downloaded from here: http://consoleemu.com/tutorials/install-pcsx2-mac). When I did this PCSX2 opens, stays open for 10 seconds or so, and then crashes. The logs for this (more complete than for those above) are here:

http://pastebin.com/qUhz6qtm
http://pastebin.com/6NmywUEa

Thanks for your help on this.
(07-19-2016, 06:19 PM)emkan Wrote: [ -> ]I just did and it gives the exact same log as above. (This was after successfully completing all the steps here: http://forums.pcsx2.net/Thread-PCSX2-CE-...2015-Guide)

Alternatively I tried using the 1.0.7 version. (downloaded from here: http://consoleemu.com/tutorials/install-pcsx2-mac). When I did this PCSX2 opens, stays open for 10 seconds or so, and then crashes. The logs for this (more complete than for those above) are here:

http://pastebin.com/qUhz6qtm
http://pastebin.com/6NmywUEa

Thanks for your help on this.

Be sure you clear any value with WINEDEBUG in the wrapper menu.
(07-19-2016, 11:08 PM)uyjulian Wrote: [ -> ]Be sure you clear any value with WINEDEBUG in the wrapper menu.

Here we are: http://pastebin.com/AaitksxY

For some reason forcing Wine to use the system-installed X11 was the trick that finally got the debug info to print in the log.
(07-20-2016, 03:51 AM)emkan Wrote: [ -> ]Here we are: http://pastebin.com/AaitksxY

For some reason forcing Wine to use the system-installed X11 was the trick that finally got the debug info to print in the log.

No, don't use X11, it causes problem.
Use the native Mac driver (I don't remember what is the option exactly)
(07-19-2016, 01:56 PM)uyjulian Wrote: [ -> ]you need to use winetricks vcrun2015 from the winetricks menu in the wine wrapper


Use "Test Run" in the wine menu to see what went wrong (it gives full log)

Thanks, I'd forgotten MSXML3
(07-20-2016, 05:00 AM)uyjulian Wrote: [ -> ]No, don't use X11, it causes problem.
Use the native Mac driver (I don't remember what is the option exactly)

The logs that I pasted in the previous message are from a test run that used the native Mac driver (under Set Screen Options).
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31