Posts: 7
Threads: 0
Joined: Jul 2013
Reputation:
0
how to fix this error?
"This device cannot start. (Code 10)"
i already install x360 controller driver
Posts: 1
Threads: 0
Joined: Aug 2013
Reputation:
0
08-21-2013, 03:54 PM
(This post was last modified: 08-21-2013, 10:21 PM by Sheffield178.)
I am having difficulty getting this to work via USB. I had MotionJoy installed previously, but I believe I have finally been able to get rid of all their drivers.
I plugged the controller in, let the default drivers install, then I ran SCP driver. My device manager now lists an Xbox360 controller with SCP drivers. When I run SCPUser, it says a controller is connected, however the buttons do nothing. The same thing is true if I try to calibrate the controller through "Devices and Printers" section in control panel.
I have tried several combinations of uninstall/reinstall/unplug/plug in. I am not sure what to do now. It's like it knows there is a controller in there but won't register any button presses. The controller worked through motionjoy previously.
I am running Windows 7 64bit, I have the latest xbox360 controller drivers as well. Any help would be extremely appreciated.
EDIT: Managed to solve my problem. I tried the pinhole reset after disconnecting the controller and then it worked.
Posts: 7
Threads: 3
Joined: May 2013
Reputation:
0
How do I modify lilypad.dll?
Posts: 1
Threads: 0
Joined: Aug 2013
Reputation:
0
08-22-2013, 02:05 PM
(This post was last modified: 08-22-2013, 07:43 PM by Sledge.)
Alright, Imma need some help.
I have two controllers, one with DS3 and one without. I'd like to use the DS3 one as my primary controller, yet the DS3-less one seems to have reserved the first slot. Can I change their slots, uninstall the controller or something?
Thanks in advance and SORRY if this has been resolved already.
EDIT: Nevermind, just reinstalled and it works. How silly of me not to think that!
Posts: 6
Threads: 0
Joined: Aug 2013
Reputation:
0
I had the same issue, but reinstalling didn't work. After trying a lot of things it seems I had to "Force Install" (while it was already installed) which I didn't need to use before.
Is there an easier way to reset control numbering?
Posts: 4
Threads: 0
Joined: Jul 2013
Reputation:
0
For the 2 posts above, I think you have to restart the service.
Posts: 6
Threads: 0
Joined: Aug 2013
Reputation:
0
Would that have to be done in the Windows services window (services.msc)? I had stopped and restarted what ever is accessible in ScpServer.exe, that was the first thing I tried. You would think my first attempt to uninstall and reinstall the drivers would reset the service, no?