..:: PCSX2 Forums ::..

my controller sony ps3 have printed in front DUALSHOCK 3 and SIXAXIS.i tested already with ScpUser but vibration it doesn't work.DS3 Controller for Windows Properties:hardaware lds : USB\VID_054C&PID_0268&REV_0100 USB\VID_054C&PID_0268 PLS HELP ME MR.CRUSH

Is there a reason why your "ScpService.exe" is showing up under network traffic in resource monitor? Its registering as 7KB/s. I've also had a suspicious activity on my email account from China that I have never had before (I installed this software a day and a half ago and the activity was 4 hours ago)

Not trying to accuse or anything, but it has made me wary and disabled the drivers.

Nvm on my last post. I tried something else and now my controller works.

@cblair: cool that you got it working. What did you do, in case anyone else has a similar problem?

@jhun23: not really much I can do to help, does Rumble work on your controller when plugged in to a PS3?

@mqk9999: the drivers do not connect to any external site, they do use localhost UDP connections to talk to each other [this is strictly internal to your machine]. See Post #592 for a description.

You can verify this on Windows 7 by running Resource Monitor - Task Manager -> Performance Tab -> Resource Monitor. See screenshot for my test PC (cyblade.spartan.local). Note that the totals for Send & Receive are the same, so no data is leaving the machine.

If you disable your network card, you will see that the network activity is not changed. Verifying that all activity is internal to your machine.

Full source code for all the components is provided so that you can examine / build / debug the source code.

Scarlet.Crush, me again

Really, really fantastic tool you provided us. Thank you again.

I've checked the 2 dualshocks and both are recognised, and work perfectly.

I have 2 small questions. I was wondering how to find out what is the status of battery without the PS3. I found out that apparently I should be able to find that info in the log's when disconnecting the gamepad from usb. However I cannot find that indicator anywhere (I'm talking about LOW MEDIUM FULL NONE etc). It should be in the "ScpService.log" file?

I also found out that you made the led blink whenever the gamepad will reach the Medium battery level which is fantastic for me, nicely done. Is there any possibility to change the level upon which the led will start blinking? For instance, if I'd like to change it from MEDIUM to LOW?

Second question is regarding the order of the gamepads. I'm only curious, it's not like it interferes with gaming. I wanted to ask if there is any way to change the order of gamepad mappings, as once it's done, always one gamepad will be #1 and the other will be #2, no matter in which order they were "turned on".

I switched from USB 2.0 port to USB 3.0 port. Apparently that did the trick

@soyo: the ScpMonitor tool displays the Battery status.

When connected via USB - Battery Status wil be Charging or Charged [Screenshot - Pad 1]. (Charging in this case)

When connected via BTH - Battery status will show the Battery Level [Screenshot - Pad 2]. (Full in this case)

The LED starts flashing if the Battery Level is below Medium, ie when it switches from Medium -> Low.

If the LED starts flashing you can just plug it in to USB, without interrupting any game you are playing. Switchover from BTH -> USB takes around 0.5 seconds.

Similarily you can unplug from USB to switch to BTH. It takes a few seconds for the DS3 to connect via BTH, so you would probably want to pause your game while it connects. ScpMonitor will show the Pad as Reserved during the switch over.

The DS3s are recognized by thier BTH Mac Address and the order is fixed by what order they are identified when the Service starts. USB connected pads first, then pads as they are connected by BTH. The fixed order is so that you can switch seemlessly from USB -> BTH or BTH -> USB without the Pad Id changing.

If you want them in a specific order, disconnect them from USB. Reboot or restart the Service. Then connect via BTH in the order you want.

(03-21-2013, 07:22 PM)Scarlet.Crush Wrote: [ -> ]@soyo: the ScpMonitor tool displays the Battery status.

When connected via USB - Battery Status wil be Charging or Charged [Screenshot - Pad 1]. (Charging in this case)

When connected via BTH - Battery status will show the Battery Level [Screenshot - Pad 2]. (Full in this case)

Damn, should have guessed it

Thanks. It is exactly as you described.

Quote:The LED starts flashing if the Battery Level is below Medium, ie when it switches from Medium -> Low.

If the LED starts flashing you can just plug it in to USB, without interrupting any game you are playing. Switchover from BTH -> USB takes around 0.5 seconds.

Similarily you can unplug from USB to switch to BTH. It takes a few seconds for the DS3 to connect via BTH, so you would probably want to pause your game while it connects. ScpMonitor will show the Pad as Reserved during the switch over.

The DS3s are recognized by thier BTH Mac Address and the order is fixed by what order they are identified when the Service starts. USB connected pads first, then pads as they are connected by BTH. The fixed order is so that you can switch seemlessly from USB -> BTH or BTH -> USB without the Pad Id changing.

If you want them in a specific order, disconnect them from USB. Reboot or restart the Service. Then connect via BTH in the order you want.

Perfect!

All clear.

Thanks for your answers, and again and again for your great tool! Motioninjoy can go hide in shame.

Update - SCP-DS3-Driver-Package-1.0.0.103 has been released, see Post #1.

Bluetooth Release Candidate (SCP-DS3-Driver-Package-0.8.0.100.7z)

Note : The Bluetooth Driver requires that you dedicate a Bluetooth Dongle to DS3 use. It will not be usable by other Bluetooth devices after the driver has been installed.

Changes from 0.7.0.96
1. Renamed distribution package.
2. ScpDriver - Added check box for Bluetooth Driver to allow USB only install.
3. ScpDriver - Removed Pre-Install button.
4. ScpMonitor - added resize of form based on system font size in use.
5. ScpMonitor - added check box to allow disabling of LEDs in configuration form.
6. ScpControl - added support for disabling LEDs.
7. ScpControl - implemented slow flash of LED while Charging on USB.
8. ScpControl - removed thresholding effect from raw xinput values.
9. ScpControl - rumble code optimisations.
10. ScpService - added start dependancy for ScpVBus
11. Virtual Bus - rumble code optimisations.
12. Virtual Bus - resolved incompatibility with XBCD drivers.
13. Package Layout - renamed bin\System\i386 to bin\System\x86.
14. Package Layout - removed ScpServer.exe from the distribution.

Currently supported Bluetooth Dongle Hardware Ids :
USB\VID_0A12&PID_0001
USB\VID_050D&PID_016A
USB\VID_0CF3&PID_3002
USB\VID_0A5C&PID_2148
USB\VID_0A5C&PID_21E8
USB\VID_0461&PID_4D75
USB\VID_0B05&PID_1783
USB\VID_0B05&PID_179C
USB\VID_0B05&PID_B700
USB\VID_04CA&PID_3006
USB\VID_0489&PID_E011
USB\VID_13D3&PID_3304
USB\VID_0930&PID_0215
USB\VID_07D1&PID_F101
USB\VID_0489&PID_E04E
USB\VID_1131&PID_1004
USB\VID_0A5C&PID_21E1
USB\VID_0DB0&PID_3801
USB\VID_046D&PID_C709
USB\VID_0B05&PID_17B5
USB\VID_0A5C&PID_2146
USB\VID_0C10&PID_0000
USB\VID_413C&PID_8126
USB\VID_05AC&PID_821A
USB\VID_0A5C&PID_2153
USB\VID_0489&PID_E042
USB\VID_1131&PID_1001

Important - make sure your Bluetooth dongle and DS3(s) are plugged in via USB before running ScpDriver.exe. Make sure you have the latest DirectX redist installed and the latest X360 drivers available.

The inbox X360 drivers that ship with Windows 7 are outdated and may cause stability issues - it is highly recommended that you install the Microsoft Xbox 360 Accessories software from this link before installing the drivers.

New Install
1. Connect your Dongle and DS3 via USB and let Windows install it's default drivers.
2. Unpack the archive.
3. Create a directory where you want the Service to run from. *
4. Copy the contents of the ScpServer\bin to the directory you created.
5. Run ScpDriver.exe.
6. Click Install.
7. Click Exit.

* I use C:\Program Files\Scarlet.Crush Productions - create from an elevated command prompt if you have UAC enabled. The directory should not be created anywhere off your User directory (eg on your Desktop, or in your Downloads directory), it should also not be on a Network drive.

Update from Beta 1
1. Close ScpMonitor.
2. Run <install dir>\ScpDriver.exe.
3. Ensure Configure Service is checked, then click Uninstall.
4. Unpack the archive.
5. Delete the contents of <install-dir>
5. Copy the contents of the archives ScpServer\bin to <install-dir>.
6. Run ScpDriver.exe.
7. Click Install.
8. Click Exit.

Pairing a DS3 to your Bluetooth Dongle - plug in the DS3 to USB while the Service is running, the DS3 will be automatically paired if required.

Edit : Added BTH Update - hardware ids (SCP-DS3-Driver-Package-0.8.0.100-Bth-Update-1.7z )

USB\VID_1286&PID_2044&MI_00

Edit : Added BTH Update - hardware ids (SCP-DS3-Driver-Package-0.8.0.100-Bth-Update-2.7z )

USB\VID_0A5C&PID_200A
USB\VID_0A5C&PID_2150

Edit : Added BTH Update - hardware ids (SCP-DS3-Driver-Package-0.8.0.100-Bth-Update-3.7z )

USB\VID_045E&PID_3500
USB\VID_0CF3&PID_3005

Edit : Added BTH Update - hardware ids (SCP-DS3-Driver-Package-0.8.0.100-Bth-Update-4.7z )

USB\VID_0CF3&PID_3004

Edit : Added BTH Update - hardware ids (SCP-DS3-Driver-Package-0.8.0.100-Bth-Update-5.7z )

USB\VID_8087&PID_07DA

Edit : Added BTH Update - hardware ids (SCP-DS3-Driver-Package-0.8.0.100-Bth-Update-6.7z )

USB\VID_0E5E&PID_6622

Edit : Added BTH Update - hardware ids (SCP-DS3-Driver-Package-0.8.0.100-Bth-Update-7.7z )

USB\VID_13D3&PID_3304

Edit : Added BTH Update - hardware ids (SCP-DS3-Driver-Package-0.8.0.100-Bth-Update-8.7z )

USB\VID_8086&PID_0189

Edit : Added BTH Update - hardware ids (SCP-DS3-Driver-Package-0.8.0.100-Bth-Update-9.7z )

USB\VID_0DF6&PID_2200

Edit : Added BTH Update - hardware ids (SCP-DS3-Driver-Package-0.8.0.100-Bth-Update-10.7z )

USB\VID_0A5C&PID_2198

Edit : Added BTH Update - hardware ids (SCP-DS3-Driver-Package-0.8.0.100-Bth-Update-11.7z )

USB\VID_03F0&PID_231D

Edit : Added BTH Update - hardware ids (SCP-DS3-Driver-Package-0.8.0.100-Bth-Update-12.7z )

USB\VID_0A5C&PID_217D

Edit : Added BTH Update - hardware ids (SCP-DS3-Driver-Package-0.8.0.100-Bth-Update-13.7z )

USB\VID_047D&PID_105E

Edit : Added BTH Update - hardware ids (SCP-DS3-Driver-Package-0.8.0.100-Bth-Update-14.7z )

USB\VID_0461&PID_4D75

Edit : Added BTH Update - hardware ids (SCP-DS3-Driver-Package-0.8.0.100-Bth-Update-15.7z )

USB\VID_0B05&PID_1785

Edit : Added BTH Update - hardware ids (SCP-DS3-Driver-Package-0.8.0.100-Bth-Update-16.7z )

USB\VID_046D&PID_C52B&MI_02 - Removed (not a Bluetooth Device)

Edit : Added BTH Update - hardware ids (SCP-DS3-Driver-Package-0.8.0.100-Bth-Update-17.7z )

USB\VID_0A5C&PID_2101
USB\VID_0B05&PID_1715
USB\VID_05AC&PID_821F

Install Update
1. Unpack the archive. *
2. Copy the contents of the ScpServer\bin to the directory you created.
3. Stop the Service [net stop "SCP DS3 Service" - from an elevated command prompt, or use Service Control Manager]
4. Run ScpDriver.exe
5. Uncheck Configure Service, then click Install.
6. Start the Service [net Start "SCP DS3 Service" - from an elevated command prompt, or use Service Control Manager]

* Bluetooth Hardware Id updates contain all previous updates, only download the most recent.

Hey there, I'm on a surface pro and I'd like to use the integrated bluetooth (I don't have any other bluetooth device so dedicating it to pure ps3 controls isn't a problem for me)

hardware Ids:
USB\VID_1286&PID_2044&REV_3201&MI_00
USB\VID_1286&PID_2044&MI_00

can you add the hardware id for this?

Thanks
keep up the good work

Edit: awesome!