@Scarlet.Crush - thanks for the reply!
I'm having issues with specific games like Rogue Legacy for example, where they can only detect one controller at any one time.
so if I have my NeoGeo Pad and Dualshock 3 plugged in, preference would be given to the "Xbox 360 Controller"
The only way to have the game detect NeoGeo Pad is to fully disconnect the Dualshock 3/Xbox 360 Controller
hmm any chance, you can have support for the controller? NeoGeo Pad
http://www.play-asia.com/neogeo-pad-usb-...-3xf7.html
It's a PS3 controller/gamepad - love the microswitch.. I rather use your work for Xinput
I really hope you can consider supporting the Wii U Pro Controller too!
(01-06-2014, 01:31 AM)Scarlet.Crush Wrote: [ -> ]@mozartripper: I don't see your BTH dongle starting up in that log, did you unplug the dongle?
Opened device manager to see error 10 on BTH ds3 device disabled then enabled it and it worked ! the correct host address appeared in scpmonitor then I plugged the controlled and it got paired. I tried re enabling ssp to see if it worked then restarted and the dongle wouldn't work. What does ssp stands for anyway ? will I be missing support for something ? Also thank you for the support really appreciated.
sorry if this has been posted before... but how do I setup multiple DS3s to work with this?
i currently have 1 DS3 paired with my bluetooth dongle
@mozartripper: SSP stands for Secure Simple Pairing, this is currently a required feature for DS4 support - it is not required for DS3 pads.
@wilflare: just plug it in via USB, can use the same port/cable (if you plug it in to a different port - drivers will be installed automatically by Windows) - if the Service is running it will be automatically paired to your Dongle.
thanks for the reply!
hmm any idea if I can get SCP to detect my third party PS3 Controller as well? (the NeoGeo Pad)
(01-05-2014, 04:28 PM)dink Wrote: [ -> ]@cmgarlan: I had the same problem, its fixed with the update - just grab the .138 update from the first post 
best regards,
- dink
Reading back through the last few pages I noticed you had the same problems. However, I'm already on the .138 update and the problem was there. Thanks for your help though! Any other advice?
Hi, sorry if this issue has already been solved, but I'm having issues getting a ds3 controller to function properly (Model CECHZC2U). I have only tested this on NBA 2K13 so far, but this is what I have observed so far (may not be accurate):
-On my initial installation with the bluetooth box checked, xinput had issues with rumble on default. Whenever an event triggered rumbling (ie. bumping into people), the controller will have no response afterwards. So I disabled vibration in-game for 2K13, and I believe that the problem disappeared. Not sure if it might have to do with the current problem, so I listed it here just in case.
- The current problem is that the controller gives random inputs/commands and I cannot determine what is setting it off. In NBA 2K13, that means the game would randomly input triangle/square/circle/cross even though I didn't press those buttons.
Is there a way to further test to see what the actual problem is? I have tried reinstalling both with and without bluetooth box checked on scpdriver.exe, but the problem persists either way. In the past when I used a usb adapter for a DS1 and a logitech gamepad, neither had such problems. Thanks for your help in advance!
I had problem with wireless drivers at DualShock3 installation. And here is solution I found.
Get MotionJoy (to install drivers) and Better DS3 tool (google it, follow guide) – it works and seems to be best way, in case you want to use DualShock 3 at PC and still at PS3.
Simple sync, wire, wireless working absolutely great and there are some very usefull additional options – at very clean UI design with great accessibility.
Hope it helps someone. Cya.
Hey Scarlet, I'm having problems with the bluetooth pairing.
I've installed everything, nice and smooth, and even though the dongle I'm using (USB\VID_0A5C&PID_200A) is in the supported list I can't seem to pair it.
But now at the SCP monitor I'm getting BTH 00000000 None.
The charge levels and everything is fine when plugged, but not working when unplugged. The pad is genuine and new.
I've tried the 'fix' from the 18th page or so but same thing.
Edit: When I unplug the controller and let it turn off (no leds) and then turn it on again via the PS button I hear a "Device connected" sound, the 1st led turns on, and the monitor changes from 'Reserved' to BTH 0000.. None.
Edit 2: Tried motionjoy, and it DOES work with bluetooth, so it's not the dongle. But I still prefer your software much better. Also the vibration doesn't work with it.
Uninstalled MotionJoy and resinstalled yours, still the same.
just to check. I probably need to purchase another Bluetooth dongle for other uses right?
(my one and only one is configured for this)
would there be any conflict?