..:: PCSX2 Forums ::..

@Scarlet.Crush: Woow. Awesome work. Long time now I only could use MotionJoy because of my 64 Bit system. Baut the usage was bad. After every reboot I must go into the control panel to get it into the right mode. With your driver this is now past. Where can I donate you a little bit for this great work?

(04-21-2013, 03:07 PM)Scarlet.Crush Wrote: [ -> ]@hoohahuh: added your hardware id, see Post #639.

Awesome, works like a charm. Thank you for your work.

@Scarlet.Crush: Sorry about adding the DS3 ID, had mixed them up. The BlueTooth hardware ID is as follows:

USB\VID_0461&PID_4D75&REV_0667
USB\VID_0461&PID_4D75

Thanks again for taking the time to do all of this.

@Aeditus: added your hardware id, see Post #639.

(04-21-2013, 09:55 PM)KarstenS Wrote: [ -> ]@Scarlet.Crush: Woow. Awesome work. Long time now I only could use MotionJoy because of my 64 Bit system. Baut the usage was bad. After every reboot I must go into the control panel to get it into the right mode. With your driver this is now past. Where can I donate you a little bit for this great work?

My brother (before I turned him to Scarlet's driver) swears up and down that motioninjoy worked for him with no extra setup for the longest time, until he updated to windows 8. Like you, I ALWAYS had to go in and change the default mode, and googling shows many others who had to do the same. Not sure what my bro did on his, as threads even on motioninjoys forum have people claiming the author of motioninjoy did this purposely to force you to open the control panel to view ads. Lame.

I tried with the gameaccy dongle & with asus bt211, and everything's fine until I unplug the controller, where it says BTH 00000000 none. : ( i tried everything...



This is just disconnect/reconnect:

@GeForceFX: it's not your dongle that is causing the issue, your controller is closing the Control & Interrupt channels after the Service channel is opened.


This would tend to indicate that it is not a genuine Sony DualShock 3 Controller.

I recently bought an adapter from play.com so I could use my PS2 controller with PS3/PC in combination with your plugin. When I was using XInput Wrapper SCP attached on the first post, some of my controller's buttons don't seem to get registered at all. I tried the newer bluetooth driver and the controller was recognised, seemed to work okay, but using lilypad the circle/cross/square/triangle buttons are either on or off, 0 -> 1, no analog in between. My steps for the bluetooth driver:

1. Installed the Service
2. Rebooted my computer
3. Copied Xinput1_3.dll to PCSX2 folder
4. Copied LilyPad-Scp-r5350.dll from win32 folder to plugins folder
5. Enabled Xinput/XBox360 input
6. Used 'test device' with both options but to no avail

Edit: After much more playing around, I did manage to get things working with the SCP driver. Awesome stuff

-removed-

sorry, just saw my bluetooth hardware id in the list.

(04-22-2013, 09:03 PM)Scarlet.Crush Wrote: [ -> ]@GeForceFX: it's not your dongle that is causing the issue, your controller is closing the Control & Interrupt channels after the Service channel is opened.

Code:

2013.04.22 15:54:05.219 >> L2CAP_Disconnection_Request [06] Handle [01DD]
2013.04.22 15:54:05.221 << L2CAP_Disconnection_Response [07]
2013.04.22 15:54:05.224 >> L2CAP_Disconnection_Request [06] Handle [01DC]
2013.04.22 15:54:05.227 << L2CAP_Disconnection_Response [07]

This would tend to indicate that it is not a genuine Sony DualShock 3 Controller.

This is weird. I bought it from a very reputable retailer, and I payed a hefty 60$ for it. It was in proper packaging, it feels like a genuinine controller (ive tried in the past really cheap ones), all the 6 direction sensors work perfectly, PC instantly recognized as a PS3 controoler, has a barcode thingy with model number on the back and all, ehh.. Not sure anymore what I can do now Q_Q